화학공학소재연구정보센터

Journal of the Electrochemical Society

Journal of the Electrochemical Society, Vol.150, No.11 Entire volume, number list
ISSN: 0013-4651 (Print) 

In this Issue (69 articles)

B495 - B503 Scale-resolved electrochemical surface structuring of titanium for biological applications
Zinger O, Chauvy PF, Landolt D
B504 - B511 Flow cell for EQCM adsorption studies - Application to iodide adsorption on gold
Galliano F, Olsson COA, Landolt D
B512 - B516 Cerium deposition on aluminum alloy 2024-T3 in acidic NaCl solutions
Kolics A, Besing AS, Baradlai P, Wieckowski A
B517 - B524 Electrochemical behavior of Cu-xZn alloys in borate buffer solution at pH 9.2
Milosev I, Strehblow HH
B525 - B529 Mechanoelectrochemical properties of passive iron surfaces evaluated by an in situ nanoscratching test
Chiba M, Seo M
B530 - B535 Chemical characterization of corrosion films electrochemically grown on carbon steel in alkaline sour environment
Sosa E, Cabrera-Sierra R, Oropeza MT, Hernandez F, Casillas N, Tremont R, Cabrera C, Gonzalez I
B536 - B539 Copper corrosion monitoring with total internal reflection ellipsometry
Poksinski M, Dzuho H, Arwin H
B540 - B546 Corrosion protection properties afforded by an in situ electropolymerized polypyrrole layer on CuZn
Fenelon AM, Breslin CB
B547 - B551 Electrochemical activation of aluminum by trace element lead
Keuong YW, Nordlien JH, Ono S, Nisancioglu K
B552 - B559 Oxidation of ZrB2-based ceramics in dry air
Monteverde F, Bellosi A
C745 - C752 Ionic conductivity of PEMFC electrodes - Effect of Nafion loading
Li GC, Pickup PG
C753 - C759 Structure and magnetic anisotropy of electrodeposited Co on n-GaAs(001)
Ford A, Bonevich JE, McMichael RD, Vaudin M, Moffat TP
C760 - C764 Factors affecting the electroless deposition of Ni-Cu-P coatings
Georgieva J, Armyanov S
C765 - C771 Influence of the interfacial pH on electrochemical CaCO3 precipitation
Tlili MM, Benamor M, Gabrielli C, Perrot H, Tribollet B
C772 - C776 Electrodeposition of ZnMn alloys using pulse plating
Muller C, Sarret M, Andreu T
C777 - C786 Study of the electroless deposition process of Ni-P-based ternary alloys
Lu GJ, Zangari G
C787 - C793 Preparation of a carbon fiber-nickel-type material and investigation of the electrocatalytic activity for the hydrogen evolution reaction
Daftsis E, Pagalos N, Jannakoudakis A, Jannakoudakis P, Theodoridou E, Rashkov R, Loukaytsheva M, Atanassov N
C794 - C797 Rapid production of high aspect ratio copper wires via nonsubmerged anodic jets impinging on cathode substrates
Gu ZH, Fahidy TZ
C798 - C801 Fabrication of 3-D Ni/Cu multilayered microstructure by selective etching of Ni
Arai S, Hasegawa T, Kaneko N
C802 - C806 Comparison of electrodeposited copper-zinc alloys prepared individually and combinatorially
Beattie SD, Dahn JR
C807 - C812 Parameter sensitivity analysis of Monte Carlo simulations of copper electrodeposition with multiple additives
Drews TO, Braatz RD, Alkire RC
C813 - C815 Repeated 3D nucleation in electroless Cu deposition and the grain boundary structure involved
Hsu HH, Yeh JW, Lin SJ
C816 - C822 Mechanism of stabilizer acceleration in electroless nickel at wirebond substrates
Xu HW, Brito J, Sadik OA
D185 - D193 Polymer electrolytes based on ionomeric copolymers of ethylene with fluorosulfonate functionalized monomers
Doyle M, Wang L, Yang ZY, Choi SK
E527 - E534 Effect of host and guest structures on hydrogen bonding association - Influence on stoichiometry and equilibrium constants
Gomez M, Gonzalez FJ, Gonzalez I
E535 - E542 Density, molar volume, and surface tension of molten Li2CO3-Na2CO3 and Li2CO3-K2CO3 containing alkaline earth (Ca, Sr, and Ba) carbonates
Kojima T, Miyazaki Y, Nomura K, Tanimoto K
E543 - E547 Effect of electrochemical polarization on the emission of O- ions from the surface of YSZ
Fujiwara Y, Sakai T, Kaimai A, Yashiro K, Nigara Y, Kawada T, Mizusaki J
E548 - E559 A comparative study of fabrication and performance of Ni/3 mol % Y2O3-ZrO2 and Ni/8 mol% Y2O3-ZrO2 cermet electrodes
Jiang SP
E560 - E566 In situ XANES studies of electrodeposited nickel oxide films with metal additives for the electro-oxidation of ethanol
Kim JW, Park SM
E567 - E570 Observable streaming potential in membranes
Garrido J
E571 - E577 II. Mechanisms of elevated temperature methanol electro-oxidation and poisoning on Pt/C-Nafion catalyst layers
Madden TH, Stuve EM
E578 - E582 An organic aqueous gel as electrolyte for application in electrochromic devices based in bismuth electrodeposition
de Oliveira SC, de Morais LC, Curvelo AAD, Torresi RM
E583 - E589 General and UV-assisted cathodic Fenton treatments for the mineralization of herbicide MCPA
Brillas E, Boye B, Dieng MM
E590 - E594 Effect of dopant species on the dissolving site of the protons in La2Zr2O7-doped with alkaline-earth ions
Omata T, Takagi M, Otsuka-Yao-Matsuo S
G667 - G672 Mechanism of particle deposition on silicon surface during dilute HF cleans
Chen Z, Singh RK
G673 - G682 Global parameterization of multiple point-defect dynamics models in silicon
Frewen RA, Sinno T, Dornberger E, Hoelzl R, von Ammon W, Bracht H
G683 - G688 Etching of Si,SiO2, and Si3N4 in fluorocarbon discharges interpretation based on a Langmuir surface kinetics model
Kim MT
G689 - G693 A physical model for dishing during metal CMP
Nguyen VH, Daamen R, van Kranenburg H, van der Velden P, Woerlee PH
G694 - G701 Initial oxidation of H-terminated Si(100) in O-3 (950 ppm)/O-2 and pure O-2
Cui ZJ, Takoudis CG
G702 - G706 High precision etching of Si/SiO2 on a high-density helicon etcher for nanoscale devices
Dreeskornfeld L, Hartwich J, Kretz J, Schmitt-Landsiedel D, Loraine D, Powell K, Thomas DJ
G707 - G710 Evaluation of FNO and F3NO as substitute gases for semiconductor CVD chamber cleaning
Yonemura T, Fukae K, Ohira Y, Mitsui Y, Takaichi T, Sekiya A, Beppu T
G711 - G717 Profile evolution simulation of oxide fencing during via-first dual damascene etching processes
Jin WD, Sawin HH
G718 - G723 Effect of hydrogen peroxide on oxidation of copper in CMP slurries containing glycine
Aksu S, Wang L, Doyle FM
H255 - H259 Electron-transfer kinetics at ITO films - Influence of oxygen plasma
Popovich ND, Wong SS, Ufer S, Sakhrani V, Paine D
H266 - H271 Amperometric sensing of NOx with cyclic voltammetry
Roh SW, Stetter JR
H272 - H278 Gold film amperometric sensors for NO and NO2
Roh SW, Stetter JR
A1399 - A1404 Physicochemical properties and electrochemical performance of Al-substituted alpha-Ni-(OH)(2) with additives for Ni-metal hydride batteries
Chen H, Wang JM, Pan T, Zhao YL, Zhang JQ, Cao CN
A1405 - A1407 TiO2-phosphotungstic acid photocatalysis systems with an energy storage ability
Ngaotrakanwiwat P, Saitoh S, Ohko Y, Tatsuma T, Fujishima A
A1408 - A1415 Structure, physical properties, and charge-discharge characteristics of Fe-doped Li2IrO3
Kobayashi H, Uebou Y, Tabuchi M, Kageyama H, Yamamoto Y, Matsuoka M, Tamaki J
A1416 - A1420 Effect of anode film resistance on the charge/discharge capacity of a lithium-ion battery
Christensen J, Newman J
A1421 - A1431 A sol-gel-based approach to synthesize high-surface-area Pt-Ru catalysts as anodes for DMFCs
Kim JY, Yang ZG, Chang CC, Valdez TI, Narayanan SR, Kumta PN
A1432 - A1439 Quasi-3D modeling of water transport in polymer electrolyte fuel cells
Kulikovsky AA
A1440 - A1449 Study of ionic conductivity profiles of the air cathode of a PEMFC by AC impedance spectroscopy
Guo QZ, Cayetano M, Tsou YM, De Castro ES, White RE
A1450 - A1456 Microscopy and spectroscopy of lithium nickel oxide-based particles used in high power lithium-ion cells
Abraham DP, Twesten RD, Balasubramanian M, Kropf J, Fischer D, McBreen J, Petrov I, Amine K
A1457 - A1464 Reaction of Li with alloy thin films studied by in situ AFM
Beaulieu LY, Hatchard TD, Bonakdarpour A, Fleischauer MD, Dahn JR
A1465 - A1469 Design and testing of a 64-channel combinatorial electrochemical cell
Fleischauer MD, Hatchard TD, Rockwell GP, Topple JM, Trussler S, Jericho SK, Jericho MH, Dahn JR
A1470 - A1475 Effect of synthesis conditions on the performance of Cu-CeO2-YSZ anodes in SOFCs
He HP, Vohs JM, Gorte RJ
A1476 - A1483 Properties of carbon anodes and thermal stability in LiPF6/methyl difluoroacetate electrolyte
Ihara M, Hang BT, Sato K, Egashira M, Okada S, Yamaki J
A1484 - A1490 Defect structure and n-type electrical properties of SrCe0.95Eu0.05O3-delta
Song SJ, Wachsman ED, Dorris SE, Balachandran U
A1491 - A1497 Material characterization and electrochemical study on LiNi0.95Ti0.05O2 materials
Kim J, Liu J, Chen C, Amine K
A1498 - A1502 Significance of the tetrahedral a site on the electrochemical performance of substituted Li1.05M0.05Mn1.90O4 spinel electrodes (M = Li, Mg, Zn, Al) in lithium cells
Kim JS, Vaughey JT, Johnson CS, Thackeray MM
A1503 - A1509 Rigorous 3-d mathematical modeling of PEM fuel cells - I. Model predictions without liquid water transport
Mazumder S, Cole JV
A1510 - A1517 Rigorous 3-d mathematical modeling of PEM fuel cells - II. Model predictions with liquid water transport
Mazumder S, Cole JV
A1518 - A1522 Cathode materials for reduced-temperature SOFCs
Ralph JM, Rossignol C, Kumar R
A1523 - A1527 Kinetic model of platinum dissolution in PEMFCs
Darling RM, Meyers JP
A1528 - A1532 PVdF-based membranes for DMFC applications
Navarra MA, Materazzi S, Panero S, Scrosati B
A1533 - A1537 A detailed investigation of the thermal reactions of LiPF6 solution in organic carbonates using ARC and DSC
Gnanaraj JS, Zinigrad E, Asraf L, Gottlieb HE, Sprecher M, Schmidt M, Geissler W, Aurbach D
A1538 - A1543 Improvement of initial coulombic efficiency of Co3O4 by ballmilling using Ni as an additive
Kang YM, Kim KT, Lee KY, Lee SJ, Jung JH, Lee JY
A1544 - A1547 Tin-based oxides as anode materials for lithium secondary batteries
Kim JH, Jeong GJ, Kim YW, Sohn HJ, Park CW, Lee CK