화학공학소재연구정보센터

Journal of Power Sources

Journal of Power Sources, Vol.324 Entire volume, number list
ISSN: 0378-7753 (Print) 

In this Issue (93 articles)

1 - 7 Ultrafast Li-storage of MoS2 nanosheets grown on metal-organic framework-derived microporous nitrogen-doped carbon dodecahedrons
Shao J, Gao T, Qu QT, Shi Q, Zuo ZC, Zheng HH
8 - 16 Microbial fuel cells with highly active aerobic biocathodes
Milner EM, Popescu D, Curtis T, Head IM, Scott K, Yu EH
17 - 25 Insight into self-discharge of layered lithium-rich oxide cathode in carbonate-based electrolytes with and without additive
Li JH, Xing LD, Zhang LP, Yu L, Fan WZ, Xu MQ, Li WS
26 - 32 Metal-based anode for high performance bioelectrochemical systems through photo-electrochemical interaction
Liang YX, Feng HJ, Shen DS, Long YY, Li N, Zhou YY, Ying XB, Gu Y, Wang YF
33 - 40 Synthesis of nano-sized silicon from natural halloysite clay and its high performance as anode for lithium-ion batteries
Zhou XY, Wu LL, Yang J, Tang JJ, Xi LH, Wang B
41 - 44 Nucleation and electrolytic deposition of lead on model carbon electrodes
Cericola D, Spahr M
45 - 51 Structural stabilization on SiOx film anode with large areal capacity for enhanced cyclability in lithium-ion batteries
Takezawa H, Ito S, Yoshizawa H, Abe T
52 - 60 Construction of a cathode using amorphous FePO4 nanoparticles for a high-power/energy-density lithium-ion battery with long-term stability
Zhang TB, Cheng XB, Zhang Q, Lu YC, Luo GS
61 - 69 Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 2: Model estimation
Widanage WD, Barai A, Chouchelamane GH, Uddin K, McGordon A, Marco J, Jennings P
70 - 78 Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 1: Signal design
Widanage WD, Barai A, Chouchelamane GH, Uddin K, McGordon A, Marco J, Jennings P
79 - 85 Optimization of membrane stack configuration in enlarged microbial desalination cells for efficient water desalination
Chen X, Sun HT, Liang P, Zhang XY, Huang X
86 - 96 Novel one-step synthesis of wool-ball-like Ni-carbon nanotubes composite cathodes with favorable electrocatalytic activity for hydrogen evolution reaction in alkaline solution
Chen ZH, Ma ZP, Song JJ, Wang LX, Shao GJ
97 - 105 Fabrication and performance of electrochemically grafted thiophene silicon nanoparticle anodes for Li-ion batteries
Abdelhamid ME, Snook GA, Gaubicher J, Lestriez B, Moreau P, Guyomard D, O'Mullane AP
106 - 112 Effect of nickel and iron on structural and electrochemical properties of O3 type layer cathode materials for sodium-ion batteries
Hwang JY, Myung ST, Aurbach D, Sun YK
113 - 125 Microfluidic microbial fuel cells: from membrane to membrane free
Yang Y, Ye DD, Li J, Zhu X, Liao Q, Zhang B
126 - 133 In-situ, non-destructive acoustic characterization of solid state electrolyte cells
Schmidt RD, Sakamoto J
134 - 141 High porosity and surface area self-doped carbon derived from polyacrylonitrile as efficient electrocatalyst towards oxygen reduction
You CH, Zheng RP, Shu T, Liu LN, Liao SJ
142 - 149 Solution-processed flexible planar perovskite solar cells: A strategy to enhance efficiency by controlling the ZnO electron transfer layer, PbI2 phase, and CH3NH3PbI3 morphologies
Jung K, Lee J, Kim J, Chae WS, Lee MJ
150 - 157 A new strategy to mitigate the initial capacity loss of lithium ion batteries
Su X, Lin CK, Wang XP, Maroni VA, Ren Y, Johnson CS, Lu WQ
158 - 169 On-board capacity estimation of lithium iron phosphate batteries by means of half-cell curves
Marongiu A, Nlandi N, Rong Y, Sauer DU
170 - 178 Coupling of exothermic and endothermic hydrogen storage materials
Brooks KP, Bowden ME, Karkamkar AJ, Houghton AY, Autrey ST
179 - 187 Electrochemical performance enhancement in MnCo2O4 nanoflake/graphene nanoplatelets composite
Al-Rubaye S, Rajagopalan R, Subramaniyam CM, Yu ZY, Dou SX, Cheng ZX
188 - 198 Efficiently dense hierarchical graphene based aerogel electrode for supercapacitors
Wang X, Lu CX, Peng HF, Zhang X, Wang ZK, Wang GK
199 - 207 TiN@nitrogen-doped carbon supported Pt nanoparticles as high-performance anode catalyst for methanol electrooxidation
Zhang J, Ma L, Gan MY, Fu SN, Zhao Y
208 - 214 Membraneless enzymatic ethanol/O-2 fuel cell: Transitioning from an air-breathing Pt-based cathode to a bilirubin oxidase-based biocathode
Neto SA, Milton RD, Hickey DP, De Andrade AR, Minteer SD
215 - 223 Improved electrochemical performance for vanadium flow battery by optimizing the concentration of the electrolyte
Jing MH, Wei ZF, Su W, He HX, Fan XZ, Qin Y, Liu JG, Yan CW
224 - 232 Ca and In co-doped BaFeO3-delta as a cobalt-free cathode material for intermediate-temperature solid oxide fuel cells
Wang J, Lam KY, Saccoccio M, Gao Y, Chen DJ, Ciucci F
233 - 238 Mesoporous nitrogen-doped carbon hollow spheres as high-performance anodes for lithium-ion batteries
Huo KF, An WL, Fu JJ, Gao B, Wang L, Peng X, Cheng GJ, Chu PK
239 - 252 Hybrid nanostructured microporous carbon-mesoporous carbon doped titanium dioxide/sulfur composite positive electrode materials for rechargeable lithium-sulfur batteries
Zegeye TA, Kuo CFJ, Wotango AS, Pan CJ, Chen HM, Haregewoin AM, Cheng JH, Su WN, Hwang BJ
253 - 260 Highly efficient photocatalytic hydrogen evolution from nickel quinolinethiolate complexes under visible light irradiation
Rao H, Yu WQ, Zheng HQ, Bonin J, Fan YT, Hou HW
261 - 271 Modeling mass transfer in solid oxide fuel cell anode: II. H-2/CO co-oxidation and surface diffusion in synthesis-gas operation
Bao C, Jiang ZY, Zhang XX
272 - 281 Low-cost flexible supercapacitors based on laser reduced graphene oxide supported on polyethylene terephthalate substrate
Ghoniem E, Mori S, Abdel-Moniem A
282 - 287 In situ Raman spectroscopic analysis of the coking resistance mechanism on SrZr0.95Y0.05O3-x surface for solid oxide fuel cell anodes
Nagasawa T, Chen DC, Lai SY, Liu ML, Hanamura K
288 - 293 Stainless steel-supported solid oxide fuel cell with La0.2Sr0.8Ti0.9Ni0.1O3-delta/yttria-stabilized zirconia composite anode
Dayaghi AM, Kim KJ, Kim S, Park J, Kim SJ, Park BH, Choi GM
294 - 301 In situ fabrication of three-dimensional nitrogen and boron co-doped porous carbon nanofibers for high performance lithium-ion batteries
Zhang LJ, Xia GL, Guo ZP, Sun DL, Li XG, Yu XB
302 - 308 High-performance supercapacitor electrode from cellulose-derived, inter-bonded carbon nanofibers
Cai J, Niu HT, Wang HX, Shao H, Fang J, He JR, Xiong HG, Ma CJ, Lin T
309 - 316 Edge effects in vertically-oriented graphene based electric double-layer capacitors
Yang HC, Yang JY, Bo Z, Zhang S, Yan JH, Cen KF
317 - 324 Pt loaded two-dimensional TaC-nanosheet/graphene hybrid as an efficient and durable electrocatalyst for direct methanol fuel cells
He CY, Tao JZ
325 - 333 Flexible coaxial-type fiber solid-state asymmetrical supercapacitor based on Ni3S2 nanorod array and pen ink electrodes
Wen J, Li SZ, Zhou K, Song ZC, Li BR, Chen Z, Chen T, Guo YX, Fang GJ
334 - 341 Cooperative redox-active additives of anthraquinone-2,7-disulphonate and K4Fe(CN)(6) for enhanced performance of active carbon-based capacitors
Tian Y, Liu M, Che RX, Xue R, Huang LP
342 - 348 Effects of cathode electrolyte interfacial (CEI) layer on long term cycling of all-solid-state thin-film batteries
Wang ZY, Lee JZ, Xin HLL, Han LL, Grillon N, Guy-Bouyssou D, Bouyssou E, Proust M, Meng YS
349 - 357 Achieving high capacity in bulk-type solid-state lithium ion battery based on Li6.75La3Zr1.75Ta0.25O12 electrolyte: Interfacial resistance
Liu T, Ren YY, Shen Y, Zhao SX, Lin YH, Nan CW
358 - 367 Relating the 3D electrode morphology to Li-ion battery performance; a case for LiFePO4
Liu Z, Verhallen TW, Singh DP, Wang HQ, Wagemaker M, Barnett S
368 - 377 Facile electrochemical polymerization of polypyrrole film applied as cathode material in dual rotating disk photo fuel cell
Li K, Zhang HB, Tang TT, Tang YP, Wang YL, Jia JP
378 - 387 Towards environmentally friendly Na-ion batteries: Moisture and water stability of Na2Ti3O7
Zarrabeitia M, Castillo-Martinez E, Del Amo JML, Eguia-Barrio A, Munoz-Marquez MA, Rojo T, Casas-Cabanas M
388 - 401 Experimental analysis of Hybridised Energy Storage Systems for automotive applications
Sarwar W, Engstrom T, Marinescu M, Green N, Taylor N, Offer GJ
402 - 411 Flow field design and optimization based on, the mass transport polarization regulation in a flow-through type vanadium flow battery
Zheng Q, Xing F, Li XF, Ning GL, Zhang HM
412 - 420 Synthesis of silver/nitrogen-doped reduced graphene oxide through a one-step thermal solid-state reaction for oxygen reduction in an alkaline medium
Soo LT, Loh KS, Mohamad A, Daud WRW, Wong WY
421 - 427 Na3V2O2(PO4)(2)F-MWCNT nanocomposites as a stable and high rate cathode for aqueous and non-aqueous sodium-ion batteries
Kumar PR, Jung YH, Wang JE, Kim DK
428 - 438 Improved electrochemical reversibility of over-lithiated layered Li2RuO3 cathodes: Understanding aliovalent Co3+ substitution with excess lithium
Arunkumar P, Jeong WJ, Won S, Im WB
439 - 446 Thin films of pure vanadium nitride: Evidence for anomalous non-faradaic capacitance
Bondarchuk O, Morel A, Belanger D, Goikolea E, Brousse T, Mysyk R
447 - 454 Synergistic effect of the core-shell structured Sn/SnO2/C ternary anode system with the improved sodium storage performance
Cheng YY, Huang JF, Li JY, Xu ZW, Cao LY, Qi H
455 - 461 On the dispersion of lithium-sulfur battery cathode materials effected by electrostatic and stereo-chemical factors of binders
Hong XH, Jin J, Wen ZY, Zhang SP, Wang QS, Shen C, Rui K
462 - 474 A comparative study on electrochemical cycling stability of lithium rich layered cathode materials Li1.2Ni0.13M0.13Mn0.54O2 where M = Fe or Co
Laisa CP, Kumar AKN, Chandrasekaran SS, Murugan P, Lakshminarasimhan N, Govindaraj R, Ramesha K
475 - 483 Characterization of graphite etched with potassium hydroxide and its application in fast-rechargeable lithium ion batteries
Shim JH, Lee S
484 - 491 pi-Spacer effect in dithiafulvenyl-pi-phenothiazine dyes for dye-sensitized solar cells
Zhang XF, Gou FL, Zhao DN, Shi J, Gao H, Zhu ZP, Jing HW
492 - 498 Proton exchange membrane fuel cell reversible performance loss induced by carbon monoxide produced during operation
Decoopman B, Vincent R, Rosini S, Paganelli G, Thivel PX
499 - 508 One-pot fabrication of NiFe2O4 nanoparticles on alpha-Ni(OH)(2) nanosheet for enhanced water oxidation
Chen H, Yan JQ, Wu H, Zhang YX, Liu SZ
509 - 520 Calculation of the state of safety (SOS) for lithium ion batteries
Cabrera-Castillo E, Niedermeier F, Jossen A
521 - 527 Carbonaceous thin film coating with Fe-N-4 site for enhancement of dioxovanadium ion reduction
Maruyama J, Hasegawa T, Iwasaki S, Fukuhara T, Orikasa Y, Uchimoto Y
528 - 537 Effect of modification of polyacrylonitrile-based graphite felts on their performance in redox fuel cell and redox flow battery
Zhang Y, Qian GC, Huang CD, Wang YX
538 - 546 Achieving high performance non-fullerene organic solar cells through tuning the numbers of electron deficient building blocks of molecular acceptors
Yang L, Chen YS, Chen SS, Dong T, Deng W, Lv L, Yang SN, Yan H, Huang H
547 - 555 Mesoporous carbon materials prepared from litchi shell as sulfur encapsulator for lithium-sulfur battery application
Sun ZJ, Wang SJ, Yan LL, Xiao M, Han DM, Meng YZ
556 - 571 Tolerance of non-platinum group metals cathodes proton exchange membrane fuel cells to air contaminants
Reshetenko T, Serov A, Artyushkova K, Matanovic I, Stariha S, Atanassov P
572 - 581 Exploring the sodium storage mechanism in disodium terephthalate as anode for organic battery using density-functional theory calculations
Sk MA, Manzhos S
582 - 588 Improving SiO2 impurity tolerance of Ce0.8Sm0.2O1.9: Synergy of CaO and ZnO in scavenging grain-boundary resistive phases
Ge L, Ni Q, Cai GF, Sang TY, Guo LC
589 - 597 Design and operation of an aluminium alloy tank using doped Na3AlH6 in kg scale for hydrogen storage
Urbanczyk R, Peinecke K, Meggouh M, Minne P, Peil S, Bathen D, Felderhoff M
598 - 614 Predicting the ultimate potential of natural gas SOFC power cycles with CO2 capture - Part A: Methodology and reference cases
Campanari S, Mastropasqua L, Gazzani M, Chiesa P, Romano MC
615 - 624 Ionic liquids as electrolytes for non-aqueous solutions electrochemical supercapacitors in a temperature range of 20 degrees C-80 degrees C
Zhang L, Tsay K, Bock C, Zhang JJ
625 - 636 Influence of hydrophobic treatment on the structure of compressed gas diffusion layers
Totzke C, Gaiselmann G, Osenberg M, Arlt T, Markotter H, Hilger A, Kupsch A, Muller BR, Schmidt V, Lehnert W, Manke I
637 - 645 Structural color-tunable mesoporous bragg stack layers based on graft copolymer self-assembly for high-efficiency solid-state dye-sensitized solar cells
Lee CS, Park JT, Kim JH
646 - 656 Characterization of gas diffusion electrodes for metal-air batteries
Danner T, Eswara S, Schulz VP, Latz A
657 - 664 Unveiling the sodium intercalation properties in Na-1.86 square Fe-0.14(3)(PO4)(3)
Essehli R, Ben Yahia H, Maher K, Sougrati MT, Abouimrane A, Park JB, Sun YK, Al-Maadeed MA, Belharouak I
665 - 673 A thermo-mechanical stress prediction model for contemporary planar sodium sulfur (NaS) cells
Jung K, Colker JP, Cao YZ, Kim G, Park YC, Kim CS
674 - 678 In-tank hydrogen-ferric ion recombination
Selverston S, Savinell RF, Wainright JS
679 - 686 Synthesis, characterization and performance of robust poison resistant ultrathin film yttria stabilized zirconia nickel anodes for application in solid electrolyte fuel cells
Garcia-Garcia FJ, Yubero F, Espinos JP, Gonzalez-Elipe AR, Lambert RM
687 - 693 RuO2 nanoparticles decorated MnOOH/C as effective bifunctional electrocatalysts for lithium-air battery cathodes with long-cycling stability
Kim GP, Lim D, Park I, Park H, Shim SE, Baeck SH
694 - 703 Lithium-ion Open Circuit Voltage (OCV) curve modelling and its ageing adjustment
Lavigne L, Sabatier J, Francisco JM, Guillemard F, Noury A
704 - 711 Improving sulfolane-based electrolyte for high voltage Li-ion cells with electrolyte additives
Xia J, Dahn JR
712 - 721 Towards safer sodium-ion batteries via organic solvent/ionic liquid based hybrid electrolytes
Monti D, Ponrouch A, Palacin MR, Johansson P
722 - 728 A concept for direct deposition of thin film batteries on flexible polymer substrate
Glenneberg J, Andre F, Bardenhagen I, Langer F, Schwenzel J, Kun R
729 - 737 Load cycle durability of a graphitized carbon black-supported platinum catalyst in polymer electrolyte fuel cell cathodes
Takei C, Kakinuma K, Kawashima K, Tashiro K, Watanabe M, Uchida M
738 - 744 A high-performance flow-field structured iron-chromium redox flow battery
Zeng YK, Zhou XL, An L, Wei L, Zhao TS
745 - 757 Prognostics of Proton Exchange Membrane Fuel Cells stack using an ensemble of constraints based connectionist networks
Javed K, Gouriveau R, Zerhouni N, Hissel D
758 - 765 First-principles study of ternary graphite compounds cointercalated with alkali atoms (Li, Na, and K) and alkylamines towards alkali ion battery applications
Ri GC, Yu CJ, Kim JS, Hong SN, Jong UG, Ri MH
766 - 773 Higher voltage plateau cubic Prussian White for Na-ion batteries
Piernas-Munoz MJ, Castillo-Martinez E, Bondarchuk O, Armand M, Rojo T
774 - 779 Impact of microstructure on oxygen semi-permeation performance of perovskite membranes: Understanding of oxygen transport mechanisms
Reichmann M, Geffroy PM, Richet N, Chartier T
780 - 787 Improved electrochemical performance of yolk-shell structured SnO2@void@C porous nanowires as anode for lithium and sodium batteries
Li HZ, Yang LY, Liu J, Li ST, Fang LB, Lu YK, Yang HR, Liu SL, Lei M
788 - 797 Rate capability improvement of polypyrrole via integration with functionalized commercial carbon cloth for pseudocapacitor
Feng DY, Song Y, Huang ZH, Xu XX, Liu XX
798 - 803 Oxygen substitution effects in Li10GeP2S12 solid electrolyte
Sun YL, Suzuki K, Hara K, Hori S, Yano T, Hara M, Hirayama M, Kanno R
804 - 829 Fault tolerance control for proton exchange membrane fuel cell systems
Wu XJ, Zhou BY
830 - 835 Investigation of a porous NiSi2/Si composite anode material used for lithium-ion batteries by X-ray absorption spectroscopy
Zhou D, Jia HP, Rana J, Placke T, Klopsch R, Schumacher G, Winter M, Banhart J
836 - 836 LiNiFe-based layered structure oxide and composite for advanced single layer fuel cells (vol 316, pg 37, 2016)
Zhu B, Fan LD, Deng H, He YJ, Afzal M, Dong WJ, Yaqub A, Janjua NK