화학공학소재연구정보센터

Journal of Power Sources

Journal of Power Sources, Vol.297 Entire volume, number list
ISSN: 0378-7753 (Print) 

In this Issue (67 articles)

1 - 8 Cost-effective counter electrode electrocatalysts from iron@palladium and iron@platinum alloy nanospheres for dye-sensitized solar cells
Tang QW, Liu J, Zhang HH, He BL, Yu LM
9 - 15 Efficient and stable photoelctrochemical water oxidation by ZnO photoanode coupled with Eu2O3 as novel oxygen evolution catalyst
Xie SL, Wei WJ, Huang SC, Li MY, Fang PP, Lu XH, Tong YX
16 - 22 Cooperation of multifunction composite structures and fluorescein for photovoltaic performance-enhanced ZnO-based dye-sensitized solar cells
Zhang CY, Xie YH, Bai T, Hu J, Wang JD
23 - 32 Modeling the performance of hydrogen-oxygen unitized regenerative proton exchange membrane fuel cells for energy storage
Guarnieri M, Alotto P, Moro F
33 - 44 Moisturized anode and water management in a passive vapor-feed direct methanol fuel cell operated with neat methanol
Zhang ZC, Yuan W, Wang AY, Yan ZG, Tang Y, Tang KR
45 - 52 Nickel phosphide nanoparticles-nitrogen-doped graphene hybrid as an efficient catalyst for enhanced hydrogen evolution activity
Pan Y, Yang N, Chen YJ, Lin Y, Li YP, Liu YQ, Liu CG
53 - 58 Efficient planar perovskite solar cells with large fill factor and excellent stability
Bao XC, Wang YJ, Zhu QQ, Wang N, Zhu DQ, Wang JY, Yang AL, Yang RQ
59 - 67 A facile reflux procedure to increase active surface sites form highly active and durable supported palladium@platinum bimetallic nanodendrites
Wang Q, Li YJ, Liu BC, Xu GR, Zhang G, Zhao Q, Zhang J
68 - 74 Theoretical insights into highly transparent multi-sized conducting films with high-haze and wide-angular scattering for thin film solar cells
Bai LS, Liu BF, Chen Z, Huang Q, Li BZ, Zhang DK, Sun J, Wei CC, Zhao Y, Zhang XD
75 - 82 Copper and nickel hexacyanoferrate nanostructures with graphene-coated stainless steel sheets for electrochemical supercapacitors
Wu MS, Lyu LJ, Syu JH
83 - 89 In-operando investigation of the humidity condition and the swelling of a Nafion-based membrane in a DMFC with synchrotron X-ray imaging
Arlt T, Schroder A, Heyne K, Riesemeier H, Wippermann K, Lehnert W, Manke I
90 - 97 Experimental design, operation, and results of a 4 kW high temperature steam electrolysis experiment
Zhang XY, O'Brien JE, Tao G, Zhou C, Housley GK
98 - 104 Ethanedithiol-treated manganese oxide nanoparticles for rapidly responsive and transparent supercapacitors
Ryu I, Kim G, Park D, Yim S
105 - 112 Correlation between carbon activity and carbon content in alpha-iron in liquid sodium negative electrode of liquid metal battery
Shin SH, Lee JH, Lee JK, Kim JH
113 - 120 A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries
Hendricks C, Williard N, Mathew S, Pecht M
121 - 126 Hexafluorophosphate intercalation into graphite electrode from gamma-butyrolactone solutions in activated carbon/graphite capacitors
Gao JC, Tian SF, Qi L, Yoshio M, Wan HY
127 - 139 Water emergence from the land region and water-sidewall interactions in Proton Exchange Membrane Fuel Cell gas channels with microgrooves
Shah MM, Kandlikar SG
140 - 148 Effect of the specific surface area on thermodynamic and kinetic properties of nanoparticle anatase TiO2 in lithium-ion batteries
Madej E, Klink S, Schuhmann W, Ventosa E, La Mantia F
149 - 157 Preparation of PdAg and PdAu nanoparticle-loaded carbon black catalysts and their electrocatalytic activity for the glycerol oxidation reaction in alkaline medium
Lam BTX, Chiku M, Higuchi E, Inoue H
158 - 167 Strength of an electrolyte supported solid oxide fuel cell
Fleischhauer F, Bermejo R, Danzer R, Mai A, Graule T, Kuebler J
168 - 173 Effect of the electrolytic solvent and temperature on aluminium current collector stability: A case of sodium-ion battery cathode
Otaegui L, Goikolea E, Aguesse F, Armand M, Rojo T, Singh G
174 - 180 Screen printed cathode for non-aqueous lithium-oxygen batteries
Jung CY, Zhao TS, An L, Zeng L, Wei ZH
181 - 187 Decrease in electrical resistance of surface oxide of iron-chromium-aluminium alloy by La0.6Sr0.4Co0.2Fe0.8O3 coating and heat treatment for the application of metal-supported solid oxide fuel cells
Pham HC, Taniguchi S, Inoue Y, Chou JT, Izumi T, Matsuoka K, Sasaki K
188 - 194 High-rate lithium-sulfur batteries enabled by hierarchical porous carbons synthesized via ice templation
Sahore R, Estevez LP, Ramanujapuram A, DiSalvo FJ, Giannelis EP
195 - 201 Vapor-phase polymerization of poly(3,4-ethylenedioxythiophene) (PEDOT) on commercial carbon coated aluminum foil as enhanced electrodes for supercapacitors
Tong LY, Skorenko KH, Faucett AC, Boyer SM, Liu J, Mativetsky JM, Bernier WE, Jones WE
202 - 207 Template-directed fabrication of porous gas diffusion layer for magnesium air batteries
Xue YJ, Miao H, Sun SS, Wang Q, Li SH, Liu ZP
208 - 216 Sulfonic acid-functionalized hybrid organic-inorganic proton exchange membranes synthesized by sol-gel using 3-mercaptopropyl trimethoxysilane (MPTMS)
Mosa J, Duran A, Aparicio M
217 - 223 Chromium vaporization from mechanically deformed pre-coated interconnects in Solid Oxide Fuel Cells
Falk-Windisch H, Sattari M, Svensson JE, Froitzheim J
224 - 241 A review on durability issues and restoration techniques in long-term operations of direct methanol fuel cells
Mehmood A, Scibioh MA, Prabhuram J, An MG, Ha HY
242 - 251 Lithium-ion cell-to-cell variation during battery electric vehicle operation
Schuster SF, Brand MJ, Berg P, Gleissenberger M, Jossen A
252 - 259 AC power generation from microbial fuel cells
Lobo FL, Wang HM, Forrestal C, Ren ZJ
260 - 264 Energy extraction from a large-scale microbial fuel cell system treating municipal wastewater
Ge Z, Wu L, Zhang F, He Z
265 - 270 Improved performance of sulfur cathode by an easy and scale-up coating strategy
Fang J, Qin FR, Li J, Zhang K, Liu WW, Wang MG, Yu F, Zhang LY
271 - 275 Low temperature co-sintering of Sr2Fe1.5Mo0.5O6-delta-Gd0.1Ce0.9O2-delta anode-supported solid oxide fuel cells with Li2O-Gd0.1Ce0.9O2-delta electrolyte
Yang ZB, Yang YR, Chen Y, Liu YH, Zhu TL, Han MF, Chen FL
276 - 282 Freeze-dryed LixMoO3 nanobelts used as cathode materials for lithium-ion batteries: A bulk and interface study
Villevieille C, Gorzkowska-Sobas A, Fjellvag H, Novak P
283 - 294 Enhanced lithium storage capability of sodium lithium titanate via lithium-site doping
Wang PF, Li P, Yi TF, Lin XT, Yu HX, Zhu YR, Qian SS, Shui M, Shu J
295 - 301 Pig bones derived N-doped carbon with multi-level pores as electrocatalyst for oxygen reduction
Wang RF, Wang K, Wang ZH, Song HH, Wang H, Ji S
302 - 314 Investment in hydrogen tri-generation for wastewater treatment plants under uncertainties
Gharieh K, Jafari MA, Guo QZ
315 - 322 Combined current and temperature mapping in an air-cooled, open-cathode polymer electrolyte fuel cell under steady-state and dynamic conditions
Meyer Q, Ronaszegi K, Robinson JB, Noorkami M, Curnick O, Ashton S, Danelyan A, Reisch T, Adcock P, Kraume R, Shearing PR, Brett DJL
323 - 328 Room temperature rechargeable magnesium batteries with sulfur-containing composite cathodes prepared from elemental sulfur and bis(alkenyl) compound having a cyclic or linear ether unit
Itaoka K, Kim IT, Yamabuki K, Yoshimoto N, Tsutsumi H
329 - 343 Theoretical study of the influence of material parameters on the performance of a polymer electrolyte fuel cell
Karpenko-Jereb L, Sternig C, Fink C, Hacker V, Theiler A, Tatschl R
344 - 350 Nano-structured composite of Si/(S-doped-carbon nanowire network) as anode material for lithium-ion batteries
Shao D, Tang DP, Yang JW, Li YW, Zhang LZ
351 - 358 A novel aqueous asymmetric supercapacitor based on petal-like cobalt selenide nanosheets and nitrogen-doped porous carbon networks electrodes
Peng H, Ma GF, Sun KJ, Zhang ZG, Li JD, Zhou XZ, Lei ZQ
359 - 369 A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell application
Xu J, Li ZY, Xu S, Munroe P, Xie ZH
370 - 378 Design and processing parameters of La2NiO4+delta-based cathode for anode-supported planar solid oxide fuel cells (SOFCs)
Jeong C, Lee JH, Park M, Hong J, Kim H, Son JW, Lee JH, Kim BK, Yoon KJ
379 - 387 Deoxyribonucleic acid directed metallization of platinum nanoparticles on graphite nanofibers as a durable oxygen reduction catalyst for polymer electrolyte fuel cells
Peera SG, Sahu AK, Arunchander A, Nath K, Bhat SD
388 - 399 Numerical evaluation of oxide growth in metallic support microstructures of Solid Oxide Fuel Cells and its influence on mass transport
Reiss G, Frandsen HL, Persson AH, Weiss C, Brandstatter W
400 - 407 Optimized CeO2 content of the carbon nanofiber support of PtRu catalyst for direct methanol fuel cells
Kunitomo H, Ishitobi H, Nakagawa N
408 - 412 Unexpected effect of drying method on the microstructure and electrocatalytic properties of bentonite/alpha-nickel hydroxide nanocomposite
Nunes CV, Danczuk M, Bortoti AA, Goncalves JM, Araki K, Anaissi FJ
413 - 418 Sputtering nickel-molybdenum nanorods as an excellent hydrogen evolution reaction catalyst
Zhang L, Xiong K, Nie Y, Wang XX, Liao JH, Wei ZD
419 - 426 Effects of cell geometries on performance of tubular solid oxide fuel cell
Cui DA, Tu BF, Cheng MJ
427 - 435 Mechanism of hydrofluoric acid formation in ethylene carbonate electrolytes with fluorine salt additives
Tebbe JL, Fuerst TF, Musgrave CB
436 - 441 Unique mesoporous spinel Li4Ti5O12 nanosheets as anode materials for lithium-ion batteries
Ge H, Chen L, Yuan W, Zhang Y, Fan QZ, Osgood H, Matera D, Song XM, Wu G
442 - 448 Freestanding manganese dioxide nanosheet network grown on nickel/polyvinylidene fluoride coaxial fiber membrane as anode materials for high performance lithium ion batteries
Zhang Y, Luo ZP, Xiao QZ, Sun TL, Lei GT, Li ZH, Li XJ
449 - 456 Discharge properties of Mg-Al-Mn-Ca and Mg-Al-Mn alloys as anode materials for primary magnesium-air batteries
Yuasa M, Huang XS, Suzuki K, Mabuchi M, Chino Y
457 - 463 High energy density sodium-ion capacitors through co-intercalation mechanism in diglyme-based electrolyte system
Han PX, Han XQ, Yao JH, Zhang LX, Cao XY, Huang CS, Cui GL
464 - 471 Performance of AA5052 alloy anode in alkaline ethylene glycol electrolyte with dicarboxylic acids additives for aluminium-air batteries
Wang DP, Zhang DQ, Lee KY, Gao LX
472 - 480 Mechanical stresses and morphology evolution in germanium thin film electrodes during lithiation and delithiation
Al-Obeidi A, Kramer D, Thompson CV, Monig R
481 - 491 Cell design concepts for aqueous lithium-oxygen batteries: A model-based assessment
Grubr D, Bessler WG
492 - 503 Investigation of platinum and palladium as potential anodic catalysts for direct borohydride and ammonia borane fuel cells
Olu PY, Deschamps F, Caldarella G, Chatenet M, Job N
504 - 510 A simple approach for the fabrication of perovskite solar cells in air
Casaluci S, Cina L, Pockett A, Kubiak PS, Niemann RG, Reale A, Di Carlo A, Cameron PJ
511 - 518 The effect of A-site and B-site substitution on BaFeO3-delta: An investigation as a cathode material for intermediate-temperature solid oxide fuel cells
Wang J, Saccoccio M, Chen DJ, Gao Y, Chen C, Ciucci F
519 - 524 Zinc chlorophyll aggregates as hole transporters for biocompatible, natural-photosynthesis-inspired solar cells
Li Y, Sasaki S, Tamiaki H, Liu CL, Song JX, Tian WJ, Zheng EQ, Wei YJ, Chen G, Fu XQ, Wang XF
525 - 533 Hydrogen purification of synthetic water gas shift gases using microstructured palladium membranes
Dunbar ZW
534 - 539 Copper Iron Conversion Coating for Solid Oxide Fuel Cell Interconnects
Grolig JG, Alnegren P, Froitzheim J, Svensson JE
540 - 550 Modeling the evolution of lithium-ion particle contact distributions using a fabric tensor approach
Stershic AJ, Simunovic S, Nanda J
551 - 555 Cyclic silicon-nitrogen-silicon core derived silylamido-magnesium compounds for magnesium-battery electrolytes with improved oxidation stability
Roy B, Kim DY, Lim Y, Lee SS, Son YH, Doo SG