화학공학소재연구정보센터

Journal of Power Sources

Journal of Power Sources, Vol.196, No.5 Entire volume, number list
ISSN: 0378-7753 (Print) 

In this Issue (72 articles)

2433 - 2444 Palladium-based electrocatalysts for hydrogen oxidation and oxygen reduction reactions
Shao M
2445 - 2451 Dependence of open-circuit potential and power density on electrolyte thickness in solid oxide fuel cells with mixed conducting electrolytes
Duncan KL, Lee KT, Wachsman ED
2452 - 2460 Materials processing for lithium-ion batteries
Li JL, Daniel C, Wood D
2461 - 2468 Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas
Chen T, Wang WG, Miao H, Li TS, Xu C
2469 - 2474 High activity of Pd-WO3/C catalyst as anodic catalyst for direct formic acid fuel cell
Feng LG, Yan LA, Cui ZM, Liu CP, Xing W
2475 - 2482 Fabrication of anode support for solid oxide fuel cell using zirconium hydroxide as a pore former
Kim M, Lee J, Han JH
2483 - 2489 Stability enhancement of polymer electrolyte membrane fuel cells based on a sulfonated poly(ether ether ketone)/poly(vinylidene fluoride) composite membrane
Sung KA, Kim WK, Oh KH, Choo MJ, Nam KW, Park JK
2490 - 2497 Evaluating chemical degradation of proton conducting perfluorosulfonic acid ionomers in a Fenton test by solid-state F-19 NMR spectroscopy
Ghassemzadeh L, Kreuer KD, Maier J, Muller K
2498 - 2512 Preparation and property-performance relationships in samarium-doped ceria nanopowders for solid oxide fuel cell electrolytes
Kosinski MR, Baker RT
2513 - 2518 Study of a proton exchange membrane fuel cells catalyst subjected to anodic operating conditions, by synchrotron-based scanning photoelectron microscopy (SPEM) and high lateral-resolution X-ray photoelectron spectroscopy
Bozzini B, Amati M, Boniardi M, Abyaneh MK, Gregoratti L, Kiskinova M
2519 - 2529 Single-site and nanosized Fe-Co electrocatalysts for oxygen reduction: Synthesis, characterization and catalytic performance
Bambagioni V, Bianchini C, Filippi J, Lavacchi A, Oberhauser W, Marchionni A, Moneti S, Vizza F, Psaro R, Dal Santo V, Gallo A, Recchia S, Sordelli L
2530 - 2538 XPS investigations of the proton exchange membrane fuel cell active layers aging: Characterization of the mitigating role of an anodic CO contamination on cathode degradation
Parry V, Berthome G, Joud JC, Lemaire O, Franco AA
2539 - 2544 NiO-CGO in situ nanocomposite attainment: One step synthesis
Cela B, de Macedo DA, de Souza GL, Martinelli AE, do Nascimento RM, Paskocimas CA
2545 - 2550 Syngas reactivity over (LaAg)(CoFe)O-3 and Ag-added (LaSr)(CoFe)O-3 anodes of solid oxide fuel cells
Huang TJ, Chen CM
2551 - 2557 Electrochemical characteristics of samaria-doped ceria infiltrated strontium-doped LaMnO3 cathodes with varied thickness for yttria-stabilized zirconia electrolytes
Ding D, Gong MY, Xu CC, Baxter N, Li YH, Zondlo J, Gerdes K, Liu XB
2558 - 2566 Reactant recirculation system utilizing pressure swing for proton exchange membrane fuel cell
Uno M, Shimada T, Tanaka K
2567 - 2572 Simultaneous processes of electricity generation and ceftriaxone sodium degradation in an air-cathode single chamber microbial fuel cell
Wen Q, Kong FY, Zheng HT, Yin JL, Cao DX, Ren YM, Wang GL
2573 - 2583 Improving the proton conductivity and water uptake of polybenzimidazole-based proton exchange nanocomposite membranes with TiO2 and SiO2 nanoparticles chemically modified surfaces
Namazi H, Ahmadi H
2584 - 2594 Performance and liquid water distribution in PEFCs with different anisotropic fiber directions of the GDL
Naing KSS, Tabe Y, Chikahisa T
2595 - 2601 Activation of dispersed PtSn/C nanoparticles by tungsten oxide matrix towards more efficient oxidation of ethanol
Miecznikowski K, Kulesza PJ
2602 - 2607 Electrochemical performance of BaZr0.1Ce0.7Y0.1Yb0.1O3-delta electrolyte based proton-conducting SOFC solid oxide fuel cell with layered perovskite PrBaCo2O5+delta cathode
Ding HP, Xie YY, Xue XJ
2608 - 2614 Pt/Y0.16Zr0.84O1.92/Pt thin film solid oxide fuel cells: Electrode microstructure and stability considerations
Kerman K, Lai BK, Ramanathan S
2615 - 2620 Kinetic study of Nafion degradation by Fenton reaction
Sugawara T, Kawashima N, Murakami TN
2621 - 2626 Pt nanoparticles supported on WO3/C hybrid materials and their electrocatalytic activity for methanol electro-oxidation
Cui ZM, Feng LG, Liu CP, Xing W
2627 - 2630 Electrochemical characterizations of microtubular solid oxide fuel cells under a long-term testing at intermediate temperature operation
Yamaguchi T, Galloway KV, Yoon J, Sammes NM
2631 - 2634 A cobalt-free Sm0.5Sr0.5Fe0.8Cu0.2O3-delta-Ce0.8Sm0.2O2-delta composite cathode for proton-conducting solid oxide fuel cells
Ling YH, Yu J, Lin B, Zhang XZ, Zhao L, Liu XQ
2635 - 2639 Simultaneous visualization of oxygen distribution and water blockages in an operating triple-serpentine polymer electrolyte fuel cell
Takada K, Ishigami Y, Inukai J, Nagumo Y, Takano H, Nishide H, Watanabe M
2640 - 2643 Impact of pore microstructure evolution on polarization resistance of Ni-Yttria-stabilized zirconia fuel cell anodes
Cronin JS, Wilson JR, Barnett SA
2644 - 2649 Out-of-phase thermo-mechanical coupling behavior of proton exchange membranes
Chen X, Yan L, Wang ZF, Liu D
2650 - 2660 Performance test and degradation analysis of direct methanol fuel cell membrane electrode assembly during freeze/thaw cycles
Cha HC, Chen CY, Wang RX, Chang CL
2661 - 2668 Performance improvement of proton exchange membrane fuel cell by using annular shaped geometry
Khazaee I, Ghazikhani M
2669 - 2675 Low methanol crossover and high efficiency direct methanol fuel cell: The influence of diffusion layers
Casalegno A, Santoro C, Rinaldi F, Marchesi R
2676 - 2681 Generation of electricity in microbial fuel cells at sub-ambient temperatures
Catal T, Kavanagh P, O'Flaherty V, Leech D
2682 - 2690 Solid oxide fuel cell hybrid system: Control strategy for stand-alone configurations
Ferrari ML
2691 - 2698 MCFC integrated system in a biodiesel production process
Urbani F, Freni S, Galvagno A, Chiodo V
2699 - 2708 Performance of composite Nafion/PVA membranes for direct methanol fuel cells
Molla S, Compan V
2709 - 2716 Compliant alkali silicate sealing glass for solid oxide fuel cell applications: Thermal cycle stability and chemical compatibility
Chou YS, Thomsen EC, Williams RT, Choi JF, Canfield NL, Bonnett JF, Stevenson JW, Shyam A, Lara-Curzio E
2717 - 2724 Effect of dynamic operation on chemical degradation of a polymer electrolyte membrane fuel cell
Jung MJ, Williams KA
2725 - 2734 Analysis of liquid water transport in fuel cell gas diffusion media using two-mobile phase pore network simulations
Markicevic B, Djilali N
2735 - 2749 Systematic characterization of a PBI/H3PO4 sol-gel membrane-Modeling and simulation
Siegel C, Bandlamudi G, Heinzel A
2750 - 2753 Single passive direct methanol fuel cell supplied with pure methanol
Feng LG, Zhang J, Cai WW, Liangliang, Xing W, Liu CP
2754 - 2758 Ceria-based nanocomposite with simultaneous proton and oxygen ion conductivity for low-temperature solid oxide fuel cells
Wang XD, Ma Y, Li SH, Kashyout AH, Zhu B, Muhammed M
2759 - 2762 Behaviors of proton exchange membrane fuel cells under oxidant starvation
Dou ML, Hou M, Liang D, Shen QA, Zhang HB, Lu WT, Shao ZG, Yi BL
2763 - 2767 Fuel utilization and fuel sensitivity of solid oxide fuel cells
Huang K
2768 - 2772 Low temperature deposited (Ce,Gd)O2-x interlayer for La0.6Sr0.4Co0.2Fe0.8O3 cathode based solid oxide fuel cell
Gong YH, Ji WJ, Zhang L, Li M, Xie B, Wang HQ, Jiang YS, Song YZ
2773 - 2778 Hydrogen production via urea electrolysis using a gel electrolyte
King RL, Botte GG
2779 - 2784 The conversion among reactions at Ni-based anodes in solid oxide fuel cells with low concentrations of dry methane
You HX, Gao HJ, Chen G, Abudula A, Ding XW
2785 - 2789 Hydrolytic dehydrogenation of ammonia borane catalyzed by carbon supported Co core-Pt shell nanoparticles
Yang XJ, Cheng FY, Tao ZL, Chen J
2790 - 2801 Influence of surface modification of LiCoO2 by organic compounds on electrochemical and thermal properties of Li/LiCoO2 rechargeable cells
Takeuchi T, Kyuna T, Morimoto H, Tobishima S
2802 - 2809 High discharge capacity solid composite polymer electrolyte lithium battery
Chen YT, Chuang YC, Su JH, Yu HC, Chen-Yang YW
2810 - 2818 A polyethylene glycol-assisted carbothermal reduction method to synthesize LiFePO4 using industrial raw materials
Fey GTK, Huang KP, Kao HM, Li WH
2819 - 2825 The electrochemical behaviour of the carbon-coated Ni0.5TiOPO4 electrode material
Maher K, Edstrom K, Saadoune I, Gustafsson T, Mansori M
2826 - 2834 Highly conductive and electrochemically stable plasticized blend polymer electrolytes based on PVdF-HFP and triblock copolymer PPG-PEG-PPG diamine for Li-ion batteries
Saikia D, Wu HY, Pan YC, Lin CP, Huang KP, Chen KN, Fey GTK, Kao HM
2835 - 2840 A thin layer including a carbon material improves the rate capability of an electric double layer capacitor
Sato T, Marukane S, Morinaga T, Uemura T, Fukumoto K, Yamazaki S
2841 - 2847 A novel sol-gel method based on FePO4 center dot 2H(2)O to synthesize submicrometer structured LiFePO4/C cathode material
Peng WX, Jiao LF, Gao HY, Qi Z, Wang QH, Du HM, Si YC, Wang YJ, Yuan HT
2848 - 2853 Structural transformation of layered hydrogen trititanate (H2Ti3O7) to TiO2(B) and its electrochemical profile for lithium-ion intercalation
Zhu GN, Wang CX, Xia YY
2854 - 2857 Carboxymethylcellulose and carboxymethylcellulose-formate as binders in MgH2-carbon composites negative electrode for lithium-ion batteries
Zaidi W, Oumellal Y, Bonnet JP, Zhang J, Cuevas F, Latroche M, Bobet JL, Aymard L
2858 - 2862 Nanosized LiMn2O4 powders prepared by flame spray pyrolysis from aqueous solution
Yi FH, Kim JH, Koo HY, Ko YN, Kang YC, Lee JH
2863 - 2866 A new form of manganese carbonate for the negative electrode of lithium-ion batteries
Aragon MJ, Leon B, Vicente CP, Tirado JL
2867 - 2870 Partially fluorinated solvent as a co-solvent for the non-aqueous electrolyte of Li/air battery
Zhang SS, Read J
2871 - 2874 Template-assisted synthesis of high packing density SrLi2Ti6O14 for use as anode in 2.7-V lithium-ion battery
Dambournet D, Belharouak I, Ma JW, Amine K
2875 - 2878 C-rate performance of silicon oxycarbide anodes for Li plus batteries enhanced by carbon nanotubes
Shen J, Ahn D, Raj R
2879 - 2883 Electrochemical synthesis of macroporous aluminium films and their behavior towards lithium deposition/stripping
Gasparotto LHS, Prowald A, Borisenko N, El Abedin SZ, Garsuch A, Endres F
2884 - 2888 Recent results on aqueous electrolyte cells
Wessells C, Huggins RA, Cui Y
2889 - 2892 High capacity graphite-silicon composite anode material for lithium-ion batteries
Fuchsbichler B, Stangl C, Kren H, Uhlig F, Koller S
2893 - 2898 Comparative study of composite electrodes containing tin, polyacrylonitrile and cobalt or iron
Nacimiento F, Alcantara R, Tirado JL
2899 - 2904 Comprehensive improvements in Li-ion batteries for demanding applications
Gulbinska M, Moore G, Santee S, Lucht B, Puglia F
2905 - 2912 Thermomechanical analysis and durability of commercial micro-porous polymer Li-ion battery separators
Love CT
2913 - 2923 Linear parameter varying battery model identification using subspace methods
Hu Y, Yurkovich S
2924 - 2932 A field operational test on valve-regulated lead-acid absorbent-glass-mat batteries in micro-hybrid electric vehicles. Part I. Results based on kernel density estimation
Schaeck S, Karspeck T, Ott C, Weckler M, Stoermer AO
2933 - 2938 A field operational test on valve-regulated lead-acid absorbent-glass-mat batteries in micro-hybrid electric vehicles. Part II. Results based on multiple regression analysis and tear-down analysis
Schaeck S, Karspeck T, Ott C, Weirather-Koestner D, Stoermer AO
2939 - 2944 Effects of tetrabutoxytitanium on photoelectrochemical properties of plastic-based TiO2 film electrodes for flexible dye-sensitized solar cells
Fan K, Peng TY, Chen JN, Dai K