화학공학소재연구정보센터

Journal of Power Sources

Journal of Power Sources, Vol.161, No.2 Entire volume, number list
ISSN: 0378-7753 (Print) 

In this Issue (94 articles)

743 - 752 Electrocatalytic reduction of O-2 and H2O2 by adsorbed cobalt tetramethoxyphenyl porphyrin and its application for fuel cell cathodes
Liu HS, Zhang L, Zhang JJ, Ghosh D, Jung J, Downing BW, Whittemore E
753 - 760 Intrinsic borohydride fuel cell/battery hybrid power sources
Hong J, Fang B, Wang CS, Currie K
761 - 767 Electro-oxidation of 2-propanol on platinum in alkaline electrolytes
Markiewicz MEP, Hebert DM, Bergens SH
768 - 774 Henry's Law and the solubilities of reactant gases in the modelling of PEM fuel cells
Mann RF, Amphlett JC, Peppley BA, Thurgood CP
775 - 781 Application of Butler-Volmer equations in the modelling of activation polarization for PEM fuel cells
Mann RF, Amphlett JC, Peppley BA, Thurgood CP
782 - 789 Pt-, PtNi- and PtCo-supported catalysts for oxygen reduction in PEM fuel cells
Travitsky N, Ripenbein T, Golodnitsky D, Rosenberg Y, Burshtein L, Peled E
790 - 798 Processing of carbon composite paper as electrode for fuel cell
Mathur RB, Maheshwari PH, Dhami TL, Sharma RK, Sharma CP
799 - 805 Low temperature thermal properties of Nafion 117 membranes in water and methanol-water mixtures
Corti HR, Nores-Pondal F, Buera MP
806 - 812 Silver-cobalt bimetallic particles for oxygen reduction in alkaline media
Lima FHB, de Castro JFR, Ticianelli EA
813 - 819 PtRuO2/Ti anodes with a varying Pt : Ru ratio for direct methanol fuel cells
Shao ZG, Zhu FY, Lin WF, Christensen PA, Zhang HM
820 - 825 Electricity generation from acetate and glucose by sedimentary bacterium attached to electrode in microbial-anode fuel cells
Zhang ER, Xu W, Diao GW, Shuang CD
826 - 830 Electrodeposited PtRu on cryogel carbon-Nafion supports for DMFC anodes
Arbizzani C, Beninati S, Manferrari E, Soavi F, Mastragostino M
831 - 835 Nanostructured Pt/C and Pd/C catalysts for direct formic acid fuel cells
Liu ZL, Hong L, Tham MP, Lim TH, Jiang HX
836 - 838 C2F6 plasma treatment of a carbon support for a PEM fuel cell electrocatalyst
Shioyama H, Honjo K, Kiuchi M, Yamada Y, Ueda A, Kuriyama N, Kobayashi T
839 - 842 Radiation induced synthesis of Pt nanoparticles supported on carbon nanotubes
Wang HD, Sun XQ, Ye Y, Qiu SL
843 - 848 Effects of hydrophilic/hydrophobic properties on the water behavior in the micro-channels of a proton exchange membrane fuel cell
Cai YH, Hu J, Ma HP, Yi BL, Zhang HM
849 - 855 Dynamic numerical simulation of a molten carbonate fuel cell
Hao HL, Zhang HS, Weng SL, Su M
856 - 863 Magnetic resonance imaging (MRI) of PEM dehydration and gas manifold flooding during continuous fuel cell operation
Minard KR, Viswanathan VV, Majors PD, Wang LQ, Rieke PC
864 - 871 Investigation on "saw-tooth" behavior of PEM fuel cell performance during shutdown and restart cycles
Qi ZG, Tang H, Guo QH, Du B
872 - 875 Effects of operating parameters on performance of a proton exchange membrane fuel cell
Amirinejad M, Rowshanzamir S, Eikanic MH
876 - 884 Modeling of flow field in polymer electrolyte membrane fuel cell
Karvonen S, Hottinen T, Saarinen J, Himanen O
885 - 892 A semi empirical model of the direct methanol fuel cell. Part II. Parametric analysis
Scott K, Jackson C, Argyropoulos P
893 - 900 An oxidation-resistant indium tin oxide catalyst support for proton exchange membrane fuel cells
Chhina H, Campbell S, Kesler O
901 - 906 Novel compressive seals for solid oxide fuel cells
Le SR, Sun KN, Zhang NQ, An MZ, Zhou DR, Zhang JD, Li DG
907 - 919 Numerical study on cell performance and local transport phenomena of PEM fuel cells with novel flow field designs
Yan WM, Liu HC, Soong CY, Chen FL, Cheng CH
920 - 928 AC impedance diagnosis of a 500 W PEM fuel cell stack - Part I: Stack impedance
Yuan XZ, Sun JC, Blanco M, Wang HJ, Zhang JJ, Wilkinson DP
929 - 937 AC impedance diagnosis of a 500 W PEM fuel cell stack - Part II: Individual cell impedance
Yuan XZ, Sun JC, Wang HJ, Zhang JJ
938 - 948 The modeling of a standalone solid-oxide fuel cell auxiliary power unit
Lu N, Li Q, Sun X, Khaleel MA
949 - 956 Effects of cathode humidification on the gas-liquid interface location in a PEM fuel cell
Lee CI, Chu HS
957 - 964 Thermodynamics of SOFC efficiency and fuel utilization as functions of fuel mixtures and operating conditions
Zhu HY, Kee RJ
965 - 970 A novel approach to study the structure versus performance relationship of SOFC electrodes
Abbaspour A, Nandakumar K, Luo JL, Chuang KT
971 - 986 Characterization and fault diagnosis of PAFC cathode by EIS technique and a novel mathematical model approach
Choudhury SR, Rengaswamy R
987 - 996 Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB
997 - 1001 Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates
Zhu B, Mei BC, Shen CH, Yuan RZ
1002 - 1011 High voltage stability of nanostructured thin film catalysts for PEM fuel cells
Debe MK, Schmoeckel AK, Vernstrorn GD, Atanasoski R
1012 - 1022 Mathematical modeling of planar solid oxide fuel cells
Hussain MM, Li X, Dincer I
1023 - 1029 Design and fabrication of three-dimensional solid oxide fuel cells
Koh YH, Sun JJ, Choi WY, Kim HE
1030 - 1040 Effect of inlet flow maldistribution on the thermal and electrical performance of a molten carbonate fuel cell unit
Liu SF, Chu HS, Yuan P
1041 - 1055 Optimization of a PEM fuel cell system based on empirical data and a generalized electrochemical semi-empirical model
Wishart J, Dong Z, Secanell A
1056 - 1061 Ni1-xCux alloy-based anodes for low-temperature solid oxide fuel cells with biomass-produced gas as fuel
Xie Z, Xia CR, Zhang MY, Zhu W, Wang HT
1062 - 1068 An improved dynamic model considering effects of temperature and equivalent internal resistance for PEM fuel cell power modules
Zhang ZH, Huang XH, Jiang J, Wu B
1069 - 1075 Novel composite proton-exchange membrane based on silica-anchored sulfonic acid (SASA)
Duvdevani T, Philosoph M, Rakhman M, Golodnitsky D, Peled E
1076 - 1083 Experimental investigation of coupling phenomena in polymer electrolyte fuel cell stacks
Santis M, Freunberger SA, Papra M, Wokaun A, Buchi FN
1084 - 1095 On the mechanisms and behavior of coal syngas transport and reaction within the anode of a solid oxide fuel cell
Gemmen RS, Trembly J
1096 - 1105 Nafion/PTFE/silicate composite membranes for direct methanol fuel cells
Huang LN, Chen LC, Yu TL, Lin HL
1106 - 1115 Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials
Khandelwal M, Mench MM
1116 - 1125 Removal of excess product water in a PEM fuel cell stack by vibrational and acoustical methods
Palan V, Shepard WS, Williams KA
1126 - 1132 Effect of open circuit voltage on performance and degradation of high temperature PBI-H3PO4 fuel cells
Qi ZG, Buelte S
1133 - 1153 Performance/design formulation for a solid polymer based acid electrolyte hydrogen/air fuel cell
Sandhu SS, Fellner JP
1154 - 1160 Sm0.5Sr0.5CoO3-La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5)/LSGMC5 interface modified by an LSGMC5 interlayer synthesized using the citrate method
Wang SZ, Zhong H, Zou YM
1161 - 1168 Transient behavior of a PEMFC
Chang SM, Chu HS
1169 - 1175 Low temperature processing of interlayer-free L0.6Sr0.4Co0.2Fe0.8O3-delta cathodes for intermediate temperature solid oxide fuel cells
Lei Z, Zhu QS, Zhao L
1176 - 1182 The dynamic and steady state behavior of a PEM fuel cell as an electric energy source
Costa RA, Camacho JR
1183 - 1186 Estimating the methanol crossover rate of PEM and the efficiency of DMFC via a current transient analysis
Kin TH, Shieh WY, Yang CC, Yu G
1187 - 1191 Progress in the development of a high-power, direct ethylene glycol fuel cell (DEGFC)
Livshits V, Peled E
1192 - 1197 Power management of a direct methanol fuel cell system
Jiang RZ, Chu D
1198 - 1207 Cost related sensitivity analysis for optimal operation of a grid-parallel PEM fuel cell power plant
El-Sharkh MY, Tanrioven M, Rahman A, Alam MS
1208 - 1216 Investigation of the characteristics of a compact steam reformer integrated with a water-gas shift reactor
Seo YS, Seo DJ, Seo YT, Yoon WL
1217 - 1224 Hg/HgO electrode and hydrogen evolution potentials in aqueous sodium hydroxide
Nickell RA, Zhu WH, Payne RU, Cahela DR, Tatarchuk BJ
1225 - 1233 Characteristics of hydrogen produced by partial oxidation and auto-thermal reforming in a small methanol reformer
Horng RF, Chou HM, Lee CH, Tsai HT
1234 - 1240 Fast start-up of microchannel fuel processor integrated with an igniter for hydrogen combustion
Ryi SK, Park JS, Cho SH, Kim SH
1241 - 1246 Structural and electrochemical characteristics of LiNi0.5-xCo2xMn1.5-xO4 prepared by spray drying process and post-annealing in O-2
Li DC, Ito A, Kobayakawa K, Noguchi H, Sato Y
1247 - 1253 Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2-Ketjenblack composite cathode in lithium-ion battery
Her LJ, Hong JL, Chang CC
1254 - 1259 Effect of fluoroethylene carbonate additive on interfacial properties of silicon thin-film electrode
Choi NS, Yew KH, Lee KY, Sung M, Kim H, Kim SS
1260 - 1263 One-step synthesis LiMn2O4 cathode by a hydrothermal method
Wu HM, Tu JP, Yuan YF, Chen XT, Xiang JY, Zhao XB, Cao GS
1264 - 1274 Reaction mechanisms of aromatic compounds as an overcharge protection agent for 4 V class lithium-ion cells
Shima K, Shizuka K, Ue M, Ota H, Hatozaki T, Yamaki JI
1275 - 1280 TG-MS analysis of solid electrolyte interphase (SEI) on graphite negative-electrode in lithium-ion batteries
Zhao LW, Watanabe I, Doi T, Okada S, Yamaki J
1281 - 1287 Electrochemical properties of nano-sized Fe2O3-loaded carbon as a lithium battery anode
Hang BT, Watanabe I, Doi T, Okada S, Yamaki JI
1288 - 1296 Crosslinkable fumed silica-based nanocomposite electrolytes for rechargeable lithium batteries
Li YX, Yerian JA, Khan SA, Fedkiw PS
1297 - 1301 High temperature electrochemical behaviors of ramsdellite Li2Ti3O7 and its Fe-doped derivatives for lithium ion batteries
Ma SH, Noguchi H
1302 - 1306 Polyanthra[1,9,8-b,c,d,e][4,10,5-b,c,d,e]bis-[1,6,6a(6a-S) trithia] pentalene-active material for cathode of lithium secondary battery with unusually high specific capacity
Liu ZJ, Kong LB, Zhou YH, Zhan CM
1307 - 1313 Characterization of Zn- and Fe-substituted LiMnO2 as cathode materials in Li-ion cells
Suresh P, Shukla AK, Munichandraiah N
1314 - 1318 Hydrothermal synthesis of nano-sized anatase TiO2 powders for lithium secondary anode materials
Oh SW, Park SH, Sun YK
1319 - 1323 Enhancement of capacity of carbon-coated Si-Cu3Si composite anode using metal-organic compound for lithium-ion batteries
Yoon S, Lee SI, Kim H, Sohn HJ
1324 - 1334 Influence of the oxidative stabilisation treatment time on the electrochemical performance of anthracene oils cokes as electrode materials for lithium batteries
Concheso A, Santamaria R, Menendez R, Alcantara R, Lavela P, Tirado JL
1335 - 1340 Nonwoven support material for improved separators in Li-polymer batteries
Kritzer P
1341 - 1345 Thermal runaway inhibitors for lithium battery electrolytes
Mandal BK, Padhi AK, Shi Z, Chakraborty S, Filler R
1346 - 1355 Online estimation of the state of charge of a lithium ion cell
Santhanagopalan S, White RE
1356 - 1368 Sigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs - Part 1: Introduction and state estimation
Plett GL
1369 - 1384 Sigma-point Kalman filtering for battery management systems of LiPB-based HEV battery packs - Part 2: Simultaneous state and parameter estimation
Plett GL
1385 - 1391 The effect of the charging protocol on the cycle life of a Li-ion battery
Zhang SS
1392 - 1399 Evaluation of the electrochemical stability of graphite foams as current collectors for lead acid batteries
Jang YI, Dudney NJ, Tiegs TN, Klett JW
1400 - 1411 Dynamic model of a lead acid battery for use in a domestic fuel cell system
Durr M, Cruden A, Gair S, McDonald JR
1412 - 1419 Secondary current density distribution analysis of an aluminum-air cell
Yang SH, Yang WQ, Sun GQ, Knickle H
1420 - 1427 Ab initio simulation on the mechanism of proton transport in water
Han JH, Zhou XY, Liu HT
1428 - 1434 Chloride leaching and solvent extraction of cadmium, cobalt and nickel from spent nickel-cadmium, batteries using Cyanex 923 and 272
Reddy BR, Priya DN
1435 - 1442 Electrochemical characterization of LaNi5-xAlx (x=0.1-0.5) in the absence of additives
Liu J, Yang YF, Yu P, Li Y, Shao HX
1443 - 1449 Thermally activated ("thermal") battery technology - Part I: An overview
Guidotti RA, Masset P
1450 - 1457 Photo-electrochemical hydrogen generation using band-gap modified nanotubular titanium oxide in solar light
Raja KS, Misra M, Mahajan VK, Gandhi T, Pillai P, Mohapatra SK
1458 - 1462 Highly-flexible fibre battery incorporating polypyrrole cathode and carbon nanotubes anode
Wang J, Wang CY, Too CO, Wallace GG
1463 - 1468 Hydrometallurgical recovery of silver from waste silver oxide button cells
Sathaiyan N, Nandakumar V, Ramachandran P
1469 - 1478 Catalytic microcombustors with integrated thermoelectric elements for portable power production
Federici JA, Norton DG, Bruggemann T, Voit KW, Wetzel ED, Vlachos DG
1479 - 1485 Electrosynthesis of Bi2O3 thin films and their use in electrochemical supercapacitors
Gujar TP, Shinde VR, Lokhande CD, Han SH
1486 - 1492 Enhanced electrochemical stability of all-polymer redox supercapacitors with modified polypyrrole electrodes
Hussain AMP, Kumar A