화학공학소재연구정보센터

Journal of Power Sources

Journal of Power Sources, Vol.156, No.2 Entire volume, number list
ISSN: 0378-7753 (Print) 

In this Issue (81 articles)

127 - 127 Untitled
Moseley PT
128 - 141 The role of carbon in fuel cells
Dicks AL
142 - 150 Graphite and carbon powders for electrochemical applications
Wissler M
151 - 157 Polymeric composite bipolar plates for vehicle applications
Blunk R, Elhamid MHA, Lisi D, Mikhail Y
158 - 165 TiO2-coated Ni powder as a new cathode material for molten carbonate fuel cells
Hong MZ, Lee HS, Kim MH, Park EJ, Ha HW, Kim K
166 - 170 Synthesis and decomposition reactions of metal amides in metal-N-H hydrogen storage system
Leng HY, Ichikawa T, Hino S, Hanada N, Isobe S, Fujii H
171 - 182 Progress in preparation of non-noble electrocatalysts for PEM fuel cell reactions
Zhang L, Zhang JJ, Wilkinson DP, Wang HJ
183 - 189 Anode reaction mechanism and crossover in direct dimethyl ether fuel cell
Mizutani I, Liu Y, Mitsushima S, Ota KI, Kamiya N
190 - 194 A high-performance hydrogen generation system: Transition metal-catalyzed dissociation and hydrolysis of ammonia-borane
Chandra M, Xu Q
195 - 199 NMR investigation of water and methanol transport in sulfonated polyareylenethioethersulfones for fuel cell applications
Jayakody JRP, Khalfan A, Mananga ES, Greenbaum SG, Dang TD, Mantz R
200 - 210 Preparation of radiochemically pore-filled polymer electrolyte membranes for direct methanol fuel cells
Nasef MM, Zubir NA, Ismail AF, Dahlan KZM, Saidi H, Khayet M
211 - 223 Computational study of water transport in proton exchange membrane fuel cells
Um S, Wang CY
224 - 231 Effects of sputtering parameters on the performance of electrodes fabricated for proton exchange membrane fuel cells
Huang KL, Lai YC, Tsai CH
232 - 243 Modeling and optimization of the air system in polymer exchange membrane fuel cell systems
Bao C, Ouyang M, Yi BL
244 - 252 Numerical study of reactant gas transport phenomena and cell performance of proton exchange membrane fuel cells
Jang JH, Yan WM, Shih CC
253 - 259 Silicon-based miniaturized-reformer for portable fuel cell applications
Kwon OJ, Hwang SM, Ahn JG, Kim JJ
260 - 266 Effect of magnesium on preferential oxidation of carbon monoxide on platinum catalyst in hydrogen-rich stream
Cho SH, Park JS, Choi SH, Kim SH
267 - 280 Water flooding and two-phase flow in cathode channels of proton exchange membrane fuel cells
Liu X, Guo H, Ma CF
281 - 283 Activation of proton-exchange membrane fuel cells via CO oxidative stripping
Xu ZQ, Qi ZG, Kaufman A
284 - 287 Compact dynamic hydrogen electrode unit as a reference electrode for PEMFCs
Siroma Z, Kakitsubo R, Fujiwara N, Ioroi T, Yamazaki SI, Yasuda K
288 - 293 Performance of a unit cell equipped with a modified catalytic reformer in direct internal reforming-molten carbonate fuel cell
Wee JH
294 - 299 Operation of a proton-exchange membrane fuel cell under non-humidified conditions using thin cast Nafion membranes with different gas-diffusion media
Vengatesan S, Kim HJ, Cho EA, Jeong SU, Ha HY, Oh IH, Hong SA, Lim TH
300 - 305 Preparation, characterization and utilization of a new electrocatalyst for ethanol oxidation obtained by the sol-gel method
Calegaro ML, Suffredini HB, Machado SAS, Avaca LA
306 - 310 Anode-supported SOFC with 1Ce10ScZr modified cathode/electrolyte interface
Wang ZW, Cheng MJ, Dong YL, Zhang M, Zhang HM
311 - 314 Novel proton-conducting polymer electrolyte membranes based on PVA/PAMPS/PEG400 blend
Hamaya T, Inoue S, Qiao JL, Okada T
315 - 320 Combined activation methods for proton-exchange membrane fuel cells
Xu ZQ, Qi ZG, He CZ, Kaufman A
321 - 333 Techno-economic modelling of a solid oxide fuel cell stack for micro combined heat and power
Hawkes AD, Aguiar P, Hernandez-Aramburo CA, Leach MA, Brandon NP, Green TC, Adjiman CS
334 - 344 Computational analysis of heat and mass transfer in a micro-structured PEMFC cathode
Litster S, Pharoah JG, McLean G, Djilali N
345 - 354 Development of PtRu-CeO2/C anode electrocatalyst for direct methanol fuel cells
Guo JW, Zhao TS, Prabhuram J, Chen R, Wong CW
355 - 368 Predicting the transient response of a serpentine flow-field PEMFC I. Excess to normal fuel and air
Shimpalee S, Lee WK, Van Zee JW, Naseri-Neshat H
369 - 374 Predicting the transient response of a serpentine flow-field PEMFC II: Normal to minimal fuel and AIR
Shimpalee S, Lee WK, Zee JW, Naseri-Neshat H
375 - 387 Capillary pressure and hydrophilic porosity in gas diffusion layers for polymer electrolyte fuel cells
Gostick JT, Fowler MW, Ioannidis MA, Pritzker MD, Volfkovich YM, Sakars A
388 - 399 Toward the optimization of operating conditions for hydrogen polymer electrolyte fuel cells
Wu JX, Liu QY, Fang HB
400 - 413 Computer experimental analysis of the CHP performance of a 100 kW(e) SOFC Field Unit by a factorial design
Cali M, Santarelli MGL, Leone P
414 - 423 Parametric model of an intermediate temperature PEMFC
Cheddie D, Munroe N
424 - 433 Main and interaction effects of PEM fuel cell design parameters
Guvelioglu GH, Stenger HG
434 - 447 Gas-phase reactions of methane and natural-gas with air and steam in non-catalytic regions of a solid-oxide fuel cell
Gupta GK, Hecht ES, Zhu HY, Dean AM, Kee RJ
448 - 454 Analysis and minimization of input ripple current in PWM inverters for designing reliable fuel cell power systems
Shireen W, Kulkarni RA, Arefeen A
455 - 460 Development and testing of anode-supported solid oxide fuel cells with slurry-coated electrolyte and cathode
Muccillo R, Muccillo ENS, Fonseca FC, Franca YV, Porfirio TC, de Florio DZ, Berton MAC, Garcia CM
461 - 465 Identification of nickel sulfides on Ni-YSZ cermet exposed to H-2 fuel containing H2S using Raman spectroscopy
Dong J, Cheng Z, Zha SW, Liu ML
466 - 471 Nano-structured Pt-Cr anode catalyst over carbon support, for direct methanol fuel cell
Choi JS, Chung WS, Ha HY, Lim TH, Oh IH, Hong SA, Lee HI
472 - 479 Analysis of stationary fuel cell dynamic ramping capabilities and ultra capacitor energy storage using high resolution demand data
Meacham JR, Jabbari F, Brouwer J, Mauzey JL, Samuelsen GS
480 - 488 Hydrogen and dry ice production through phase equilibrium separation and methane reforming
Posada A, Manousiouthakis V
489 - 496 Simulation of a low temperature water gas shift reactor using the heterogeneous model/application to a pem fuel cell
Giunta P, Amadeo N, Laborde M
497 - 511 Dimethyl ether (DME) as an alternative fuel
Semelsberger TA, Borup RL, Greene HL
512 - 519 Critical flow rate of anode fuel exhaust in a PEM fuel cell system
Zhu WHH, Payne RU, Tatarchuk BJ
520 - 524 Hydrogen generation from 2,2,4-trimethyl pentane reforming over molybdenum carbide at low steam-to-carbon ratios
Cheekatamarla PK, Thomson WJ
525 - 532 Lithium ion and electronic conductivity in 3-(oligoethylene oxide)thiophene comb-like polymers
Witker D, Curtis MD
533 - 540 Redox behavior of nanohybrid material with defined morphology: Vanadium oxide nanotubes intercalated with polyaniline
Malta M, Louarn G, Errien N, Torresi RM
541 - 546 Thermal study on single electrodes in lithium-ion battery
Huang Q, Yan MM, Jiang ZY
547 - 554 Decomposition reaction of LiPF6-based electrolytes for lithium ion cells
Kawamura T, Okada S, Yamaki J
555 - 559 Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis
Lu ZR, Yang L, Guo YJ
560 - 566 Solid-state Li/LiFePO4 polymer electrolyte batteries incorporating an ionic liquid cycled at 40 degrees C
Shin JH, Henderson WA, Scaccia S, Prosini PP, Passerini S
567 - 573 A chemometric investigation of the effect of the process parameters on the performance of mixed Si/C electrodes
Dimov N, Noguchi H, Yoshio M
574 - 580 Gel-type polymer electrolytes with different types of ceramic fillers and lithium salts for lithium-ion polymer batteries
Yang CM, Kim HS, Na BK, Kum KS, Cho BW
581 - 588 Enhanced electrochemical properties of PEO-based composite polymer electrolyte with shape-selective molecular sieves
Xi JY, Qiu XP, Cui MZ, Tang XZ, Zhu WT, Chen LQ
589 - 593 Lithium ion conductivity of gel polymer electrolytes containing insoluble lithium tetrakis(pentafluorobenzenethiolato) borate
Aoki T, Ohta T, Fujinami T
594 - 597 Phosphides with zinc blende structure as anodes for lithium-ion batteries
Kishore MVVMS, Varadaraju UV
598 - 603 Influence of magnetic properties on electrochemical activity of LiNi0.5Fe0.5O2
Kalpana D, Joseyphus RJ, Venkateswaran C, Narayanasamy A, Ananth MV
604 - 609 Electrochemical properties of silicon deposited on patterned wafer
Bang B, Kim MH, Moon HS, Lee YK, Park JW
610 - 614 Functionalized polythiophene-coated textile: A new anode material for a flexible battery
Wang CY, Ballantyne AM, Hall SB, Too CO, Officer DL, Wallace GG
615 - 619 Exfoliation-induced nanoribbon formation of poly(3,4-ethylene dioxythiophene) PEDOT between MoS2 layers as cathode material for lithium batteries
Murugan AV, Quintin M, Delville MH, Campet G, Gopinath CS, Vijayamohanan K
620 - 628 Review of models for predicting the cycling performance of lithium ion batteries
Santhanagopalan S, Guo QZ, Ramadass P, White RE
629 - 633 Enhanced performance of Li-ion cell with LiBF4-PC based electrolyte by addition of small amount of LiBOB
Zhang SS, Xu K, Jow TR
634 - 644 Is 3-methyl-2-oxazolidinone a suitable solvent for lithium-ion batteries?
Gzara L, Chagnes A, Carre B, Dhahbi M, Lemordant D
645 - 654 Modelling of primary alkaline battery cathodes: A simplified model
Johansen JF, Farrell TW, Please CP
655 - 661 Synthesis of nickel hydroxide: Effect of precipitation conditions on phase selectivity and structural disorder
Ramesh TN, Kamath PV
662 - 666 Development of high-capacity nickel-metal hydride batteries using superlattice hydrogen-absorbing alloys
Yasuoka S, Magari Y, Murata T, Tanaka T, Ishida J, Nakamura H, Nohma T, Kihara M, Baba Y, Teraoka H
667 - 672 High-rate dischargeability enhancement of Ni/MH rechargeable batteries by addition of nanoscale CoO to positive electrodes
Wu JB, Tu JP, Han TA, Yang YZ, Zhang WK, Zhao XB
673 - 676 Electrochemical insertion of magnesium in open-ended vanadium oxide nanotubes
Jiao LF, Yuan HT, Si YC, Wang YJ, Cao JS, Gao XL, Zhao M, Zhou XD, Wang YM
677 - 684 Thermodynamic analysis of electrokinetic energy conversion
Xuan XC, Li DQ
685 - 691 Optimization of the TIEC/AMTEC cascade cell for high efficiency
Lodhi MAK, Malka VR
692 - 699 Investigation of the porosity of electrolytic manganese dioxide and its performance as alkaline cathode material
Qu DY
700 - 704 Porous structured vanadium oxide electrode material for electrochemical capacitors
Reddy RN, Reddy RG
705 - 711 Analysis of polyaniline-based nickel electrodes for electrochemical supercapacitors
Girija TC, Sangaranarayanan MV
712 - 718 Influence of temperature and electrolyte on the performance of activated-carbon supercapacitors
Liu P, Verbrugge M, Soukiazian S
719 - 724 Influence of mesophase activation conditions on the specific capacitance of the resulting carbons
Mora E, Ruiz V, Santamaria R, Blanco C, Granda A, Menendez R, Juarez-Galan JM, Rodriguez-Reinoso F
725 - 740 Requirements for performance characterization of C double-layer supercapacitors: Applications to a high specific-area C-cloth material
Niu JJ, Pell WG, Conway BE
741 - 747 Production of capacitive films from Mn thin films: Effects of current density and film thickness
Djurfors B, Broughton JN, Brett MJ, Ivey DG
748 - 754 Resistance distribution in electrochemical capacitors with spiral-wound structure
Zheng JP, Jiang ZN
755 - 762 An ultracapacitor circuit for reducing sulfation in lead acid batteries for Mild Hybrid Electric Vehicles
Stienecker AW, Stuart T, Ashtiani C