2625 - 2631 |
Leaching kinetics of ulexite in sodium hydrogen sulphate solutions Kavci E, Calban T, Colak S, Kuslu S |
2632 - 2635 |
A simple thermo-physical model for vapor-liquid equilibrium of the reactive HIx (HI-H2O-I2-H2) system Mandal S, Jana AK |
2636 - 2640 |
The photovoltaic efficiency of dye sensitized solar cell assembled using carbon capsulated TiO2 electrode Ju T, Lee H, Kang M |
2641 - 2645 |
Zirconia-supported niobia catalyzed formation of propanol from 1,2-propanediol via dehydration and consecutive hydrogen transfer Peng G, Wang X, Chen X, Jiang Y, Mu X |
2646 - 2649 |
Facile synthesis of monodispersed silica-coated magnetic nanoparticles Rho WY, Kim HM, Kyeong S, Kang YL, Kim DH, Kang H, Jeong C, Kim DE, Lee YS, Jun BH |
2650 - 2656 |
Wall to liquid mass transport and diffusion controlled corrosion in fixed bed reactors Abdel-Aziz MH, Bassyouni M, Mansour IAS, Nagi A |
2657 - 2662 |
A novel magnetic ion imprinted polymer for selective adsorption of trace amounts of lead(II) ions in environment samples Sayar O, Torbati NA, Saravani H, Mehrani K, Behbahani A, Zadeh HRM |
2663 - 2670 |
Application of experimental design for removal of sunset yellow by copper sulfide nanoparticles loaded on activated carbon Khodadoust S, Ghaedi M, Sahraei R, Daneshfar A |
2671 - 2679 |
Transport and retention of polymer-stabilized zero-valent iron nanoparticles in saturated porous media: Effects of initial particle concentration and ionic strength Esfahani AR, Firouzi AF, Sayyad G, Kiasat AR |
2680 - 2686 |
Simultaneous preconcentration of Cd(II), Cu(II) and Pb(II) on Nano-TiO2 modified with 2-mercaptobenzothiazole prior to flame atomic absorption spectrometric determination Pourreza N, Rastegarzadeh S, Larki A |
2687 - 2691 |
Comparison of red, brown and green seaweeds on enzymatic saccharification process Hong IK, Jeon H, Lee SB |
2692 - 2698 |
Growth and characterization of L-glutamic acid and sodium sulphate doped tri glycine sulphate single crystal SivaSankari R, Madhusoodanan U, Sridharan V, Bhowmik R, Perumal RN |
2699 - 2709 |
Adsorption of basic red 9 on activated waste Gossypium hirsutum seeds: Process modeling, analysis and optimization using statistical design Sivarajasekar N, Baskar R |
2710 - 2718 |
Surface modification of heterogeneous cation exchange membrane through simultaneous using polymerization of PAA and multi walled carbon nano tubes Moghadassi AR, Koranian P, Hosseini SM, Askari M, Madaeni SS |
2719 - 2726 |
Photocatalytic decolorization of methyl green using Fe(II)-o-phenanthroline as supported onto zeolite Y Nezamzadeh-Ejhieh A, Shahriari E |
2727 - 2734 |
Characteristics of precipitated calcium carbonate by hydrothermal and carbonation processes with mega-crystalline calcite using rotary microwave kiln Hwang DJ, Ryu JY, Yu YH, Cho KH, Ahn JW, Han C, Lee JD |
2735 - 2744 |
Synthesis and physicochemical characterizations of nanostructured Pd/carbon-clinoptilolite-CeO2 catalyst for abatement of xylene from waste gas streams at low temperature Jamalzadeh Z, Haghighi M, Asgari N |
2745 - 2753 |
Synthesis of cationic polymeric adsorbent and dye removal isotherm, kinetic and thermodynamic Mahmoodi NM, Sadeghi U, Maleki A, Hayati B, Najafi F |
2754 - 2760 |
Study of kinetics in the biosorption of lead onto native and chemically treated olive stone Blazquez G, Calero M, Ronda A, Tenorio G, Martın-Lara MA |
2761 - 2768 |
Experimental study of acetone removal by packed-bed dielectric barrier discharge reactor Zheng C, Zhu X, Gao X, Liu L, Chang Q, Luo Z, Cen K |
2769 - 2774 |
Deep oxidative desulfurization of model fuel using ozone generated by dielectric barrier discharge plasma combined with ionic liquid extraction Ma C, Dai B, Liu P, Zhou N, Shi A, Ban L, Chen H |
2775 - 2781 |
Characterization of the removal of Chromium(VI) from groundwater by electrocoagulation Hamdan SS, El-Naas MH |
2782 - 2791 |
Advanced ozone treatment of heavy oil refining wastewater by activated carbon supported iron oxide Chen C, Chen H, Guo X, Guo S, Yan G |
2792 - 2800 |
Optimizing adsorption of arsenic(III) by NH2-MCM-41 using response surface methodology Wu Y, Jin Y, Cao J, Yilihan P, Wen Y, Zhou J |
2801 - 2805 |
Application of O3 and O3/H2O2 as post-treatment processes for color removal in swine wastewater from a membrane filtration system Yoon Y, Hwang Y, Kwon M, Jung Y, Hwang TM, Kang JW |
2806 - 2813 |
Application of solar light for degradation of ammonia in petrochemical wastewater by a floating TiO2/LECA photocatalyst Shavisi Y, Sharifnia S, Zendehzaban M, Lobabi Mirghavami M, Kakehazar S |
2814 - 2818 |
Pervaporative separation of butanol using a composite PDMS/PEI hollow fiber membrane Trinh LTP, Lee YJ, Bae HJ, Lee HJ |
2819 - 2829 |
Bis-Schiff bases of isatin as new and environmentally benign corrosion inhibitor for mild steel Ansari KR, Quraishi MA |
2830 - 2839 |
Plasma grafting montmorillonite/iron oxide composite with β-cyclodextrin and its application for high-efficient decontamination of U(VI) Xiao J, Chen Y, Xu J |
2840 - 2847 |
Preparing of novel fibrous ligand exchange adsorbent for rapid column-mode trace phosphate removal from water Rabiul Awual M, Shenashen MA, Jyo A, Shiwaku H, Yaita T |
2848 - 2857 |
Study of alkylation on a Lewis and Brønsted acid hybrid catalyst and its industrial test Liu N, Pu X, Wang X, Shi L |
2858 - 2863 |
Effect of alkaline earth promoters (MgO, CaO, and BaO) on the activity and coke formation of Ni catalysts supported on nanocrystalline Al2O3 in dry reforming of methane Alipour Z, Rezaei M, Meshkani F |
2864 - 2869 |
Comparison of adsorptive features between silver ion and silver nanoparticles on nanoporous materials Sim JH, Umh HN, Shin HH, Sung HK, Oh SY, Lee BC, Rengaraj S, Kim Y |
2870 - 2875 |
Environmental remediation of cyanide solutions by photocatalytic oxidation using Au/CdS nanoparticles Aazam ES |
2876 - 2882 |
Enhanced production of high octane gasoline blending stock from methanol with improved catalyst life on nano-crystalline ZSM-5 catalyst Saxena SK, Viswanadham N, Al-Muhtaseb AH |
2883 - 2887 |
Facile and safe graphene preparation on solution based platform Johra FT, Lee JW, Jung WG |
2888 - 2894 |
Accelerated removal of nitrate from aqueous solution by utilizing polyacrylic anion exchange resin with magnetic separation performance Song H, Yao Z, Shuang C, Li A |
2895 - 2900 |
Improvement single-wall carbon nanotubes (SWCNTs) based on functionalizing with monomers 2-hydroxyethylmethacryate (HEMA) and N-vinylpyrrolidone (NVP) for pharmaceutical applications as cancer therapy Abbaszadeh F, Moradi O, Norouzi M, Sabzevari O |
2901 - 2904 |
Precipitation.deposition assisted fabrication and characterization of nano-sized zinc manganite Deraz NM, Abdeltawab AA, Selim MM, El-Shafey O, El-Asmy AA, Al-Deyab SS |
2905 - 2913 |
Artificial neural network optimization for removal of hazardous dye Eosin Y from aqueous solution using Co2O3-NP-AC: Isotherm and kinetics study Assefi P, Ghaedi M, Ansari A, Habibi MH, Momeni MS |
2914 - 2920 |
Optimum conditions for testing N-nitrosamine formation potential (FP) through ozonation in wastewater samples Yoon S, Tanaka H |
2921 - 2926 |
Investigation of Reactive Red Dye 198 removal using multiwall carbon nanotubes in aqueous solution Baghapour MA, Pourfadakari S, Mahvi AH |
2927 - 2933 |
Dynamic modeling and operability analysis of a dual-membrane fixed bed reactor to produce methanol considering catalyst deactivation Farsi M, Jahanmiri A |
2934 - 2938 |
A novel durable photoactive nylon fabric using electrospun nanofibers containing nanophotocatalysts Zohoori S, Karimi L, Ayaziyazdi S |
2939 - 2947 |
Uptake of Reactive Black 5 by pumice and walnut activated carbon: Chemistry and adsorption mechanisms Heibati B, Rodriguez-Couto S, Amrane A, Rafatullah M, Hawari A, Al-Ghouti MA |
2948 - 2957 |
Hydrogen production from CO2 reforming of methane over high pressure H2O2 modified different semi-cokes Zhang G, Qu J, Du Y, Guo F, Zhao H, Zhang Y, Xu Y |
2958 - 2963 |
Mathematical modeling and numerical simulation of ammonia removal from wastewaters using membrane contactors Nosratinia F, Ghadiri M, Ghahremani H |
2964 - 2968 |
Photocatalytic degradation of Brilliant Red M5B using four different nanocomposites (ZnFe2O4, porous ZnFe2O4, ZnFe2O4.TiO2, FeTiO3) coated on glass Habibi MH, Habibi AH |
2969 - 2974 |
Gas-phase mercury removal through sulfur impregnated porous carbon Reddy KSK, Shoaibi AA, Srinivasakannan C |
2975 - 2983 |
Statistical evaluation of a liquid desiccant dehumidification system using RSM and theoretical study based on the effectiveness NTU model Langroudi LO, Pahlavanzadeh H, Mousavi SM |
2984 - 2991 |
An extended critical-scaling equation with a nonlinear order parameter and its use for the fits to vapor/liquid equilibria Yeo IS, Lim KH |
2992 - 2997 |
Removal of tannic acid from aqueous solution by magnetic carbohydrate natural polymer Kumar R, Barakat MA, Soliman EM |
2998 - 3008 |
Beneficiation of the huge waste quantities of barley and rice husks as well as coal fly ashes as additives for Portland cement Khalil NM, Hassan EM, Shakdofa MME, Farahat M |
3009 - 3013 |
Performance response and recovery of temporal and spatial phase separated process for nutrients removal in short-term shock loadings Chang D, Choi HS, Sunwoo Y, Hong KH |
3014 - 3018 |
Removal of molybdenum using silver nanoparticles from water samples: Particle swarm optimization.artificial neural network Khajeh M, Dastafkan K |
3019 - 3024 |
Diversity-oriented synthesis of quinazoline derivatives using zirconium tetrakis(dodecylsulfate) [Zr(DS)4] as a reusable Lewis acid-surfactant-combined catalyst in tap water Safaei HR, Shekouhy M, Khademi S, Rahmanian V, Safaei M |
3025 - 3032 |
Removal of Cr(VI) from aqueous solution by surfactant-modified kaolinite Jin X, Jiang M, Duc J, Chen Z |
3033 - 3036 |
Fabrication and characterization of zinc oxide nanoparticle coated magnetic iron oxide: Effect of S-layers adsorption on surface of oxide Habibi N, Karimi B |
3037 - 3045 |
Enhanced triisopropylbenzene cracking and suppressed coking on tailored composite of Y-zeolite/amorphous silica-alumina catalyst Aghakhani MS, Khodadadi AA, Najafi S, Mortazavi Y |
3046 - 3052 |
Cellular protective effects of dehydroeffusol isolated from Juncus effusus L. and the mechanisms underlying these effects Park SN, Won DH, Hwang JP, Han SB |
3053 - 3060 |
Effect of hollow silica support on the reduction performance of harmful gases of 3Pt-2MgO-3ZrO2-2CeO2 for DOC Seo CK, Bae JY |
3061 - 3067 |
Continuous gas.liquid aerobic oxidation of toluene catalyzed by [T(p-Cl)PPFe]2O in a series of three stirred tank reactors Luo W, Sun J, Ye J, Deng W, Liu Q, Guo C |
3068 - 3074 |
Balancing of plating solution in CuCN electroplating process Hong IK, Park JW, Lee SB |
3075 - 3080 |
Poly(hydroxyethyl acrylate-co-coumaryl acrylate) as a photo-responsive amphiphile Lee JH, Kim JC |
3081 - 3088 |
Adsorption behavior of Congo red from aqueous solution on La2O3-doped TiO2 nanotubes Guo H, Chen J, Weng W, Zheng Z, Wang D |
3089 - 3095 |
Preparation of spherical foamed body with function of media for waste water treatment by using waste LCD glass Lee CT |
3096 - 3101 |
Statistical evaluation and optimization of effective parameters in bioleaching of metals from molybdenite concentrate using Acidianus brierleyi Rastegar SO, Mousavi SM, Rezaei M, Shojaosadati SA |
3102 - 3107 |
Catalytic performance of zinc containing ionic liquids immobilized on silica for the synthesis of cyclic carbonates Kim MI, Choi SJ, Kim DW, Park DW |
3108 - 3114 |
Kinetic modeling formulation of the methanol to olefin process: Parameter estimation Sedighi M, Bahrami H, Towfighi J |
3115 - 3121 |
Physicochemical and catalytic properties of nanosized Au/CeO2 catalysts for eco-friendly oxidation of benzyl alcohol Sudarsanam P, Mallesham B, Naga Durgasri D, Reddy BM |
3122 - 3127 |
Comparison of poly(ethylene-co-acrylic acid) loaded Zn2+-montmorillonite nanocomposites and poly(ethylene-co-acrylic acid) zinc salt Li D, Sur GS |
3128 - 3133 |
Preparation of porous and hollow Mn2O3 microspheres and their adsorption studies on heavy metal ions from aqueous solutions Tao P, Shao M, Song C, Wu S, Cheng M, Cui Z |
3134 - 3140 |
Effects of polyaniline nanoparticles in polyethersulfone ultrafiltration membranes: Fouling behaviours by different types of foulant Razali NF, Mohammad AW, Hilal N |
3141 - 3149 |
A facile and reliable route to prepare of flower shaped lead sulfide nanostructures from a new sulfur source Shakouri-Arani M, Salavati-Niasari M |
3150 - 3156 |
A hybrid photocatalytic and enzymatic process using glucose oxidase immobilized on TiO2/polyurethane for removal of a dye Shoabargh S, Karimi A, Dehghan G, Khataee A |
3157 - 3162 |
Regeneration of aged-AgNPs via density gradient ultracentrifugal nanoseparation Sim JH, Umh HN, Shin HH, Sung HK, Oh SY, Lee BC, Selvaraj R, Kim Y |
3163 - 3169 |
Application of response surface methodology for modeling and optimization of membrane distillation desalination process Boubakri A, Hafiane A, Tahar Bouguecha SA |
3170 - 3174 |
A facile synthesis of CuI-graphene nanocomposite by glucose as a green capping agent and reductant Tavakoli F, Salavati-Niasari M |
3175 - 3178 |
Sensitivity of nanoparticles’ stability at the point of zero charge (PZC) Umh HN, Kim Y |
3179 - 3185 |
Synthesis and characterization of wurtzite ZnS nanoplates through simple solvothermal method with a novel approach Shakouri-Arani M, Salavati-Niasari M |
3186 - 3194 |
The study of thermodynamics and kinetics methyl orange and malachite green by SWCNTs, SWCNT-COOH and SWCNT-NH2 as adsorbents from aqueous solution Derakhshan MS, Moradi O |
3195 - 3200 |
Effect of naphthyl curing agent having thermally stable structure on properties of UV-cured pressure sensitive adhesive Pang B, Ryu CM, Kim HI |
3201 - 3207 |
Acid reducing leaching of cathodic powder from spent lithium ion batteries: Glucose oxidative pathways and particle area evolution Pagnanelli F, Moscardini E, Granata G, Cerbelli S, Agosta L, Fieramosca A, Toro L |
3208 - 3213 |
Field emission enhancement of polypyrrole due to band bending induced tunnelling in polypyrrole-carbon nanotubes nanocomposite Gupta ND, Maity S, Chattopadhyay KK |
3214 - 3216 |
A new modified multiwalled carbon nanotube paste electrode for quantification of tin in fruit juice and bottled water samples Sobhanardakani S, Farmany A, Abbasi S |
3217 - 3227 |
Silybum marianum extract as a natural source inhibitor for 304 stainless steel corrosion in 1.0 M HCl Soltani N, Tavakkoli N, Kashani MK, Mosavizadeh A, Oguzie EE, Jalali MR |
3228 - 3233 |
Synthesis and characterization of waterborne polyurethane containing UV absorption group for finishing of cotton fabrics Xinrong S, Nanfang W, Kunyang S, Sha D, Zhen C |
3234 - 3242 |
Kinetics, equilibrium and thermodynamics studies of arsenate adsorption from aqueous solutions onto iron hydroxide Mahmood T, Din SU, Naeem A, Tasleem S, Alum A, Mustafa S |
3243 - 3250 |
Emulsion liquid membrane stability in the extraction of ionized nanosilver from wash water Sulaiman RNR, Othman N, Saidina Amin NA |
3251 - 3255 |
Processing and characterization of nano-magnetic Co0.5Ni0.5Fe2O4 system Deraz NM, Abd-Elkader OH |
3256 - 3269 |
Membrane/sorption-enhanced methanol synthesis process: Dynamic simulation and optimization Bayat M, Dehghani Z, Rahimpour MR |
3270 - 3275 |
Environmental remediation of thiophene solution by photocatalytic oxidation using NiO/AgInS2 nanoparticles Baeissa E |
3276 - 3282 |
mPW1PW91 study for conformational isomers of methylene bridge-monosubstituted tetramethoxycalix[4]arenes Park K, Son HJ, Choe JI |
3283 - 3291 |
Binding nature of polystyrene and PVC 50:50% with CP and NP 50:50% ion exchangeable, mechanically and thermally stable membrane Arsalan M, Rafiuddin |
3292 - 3296 |
Liquid-liquid equilibria for ternary mixtures of methyl tert-butyl ether, ethyl tert-butyl ether, water and imidazolium-based ionic liquids at 298.15 K Hwang IC, Park SJ, In SJ |
3297 - 3302 |
A facile method for preparation of iron based catalysts for high temperature water gas shift reaction Meshkani F, Rezaei M |
3303 - 3312 |
Mesoporous CexZr1-xO2 solid solutions supported CuO nanocatalysts for toluene total oxidation Deng QF, Ren TZ, Agula B, Liu Y, Yuan ZY |
3313 - 3319 |
Synthesis of pure nanocrystalline ZrO2 via a simple sonochemical-assisted route Zinatloo-Ajabshir S, Salavati-Niasari M |
3320 - 3328 |
Zinc(II) modified carbon paste electrodes based on self-assembled mercapto compounds-gold-nanoparticles for its determination in water samples Ali TA, Azzam EMS, Hegazy MA, El-Farargy AFM, Abd-elaal AA |
3329 - 3334 |
Photocatalytic conversion of 4-nitroaniline to p-phenylenediamine using Ni/ZnSn(OH)6 nanoparticles Mohamed RM, Aazam ES |
3335 - 3341 |
A facile hydrothermal method for synthesis different morphologies of PbTe nanostructures Gholamrezaei S, Salavati-Niasari M, Ghanbari D |
3342 - 3348 |
Synthesis, characterization and surface properties of amino-glycopolysiloxane EL-Sukkary MMA, Ismail DA, Rayes SME, Saad MA |
3349 - 3355 |
Physical properties of aqueous mixtures of N-methyldiethanolamine (MDEA) and ionic liquids Yusoff R, Shamiri A, Aroua MK, Ahmady A, Shafeeyan MS, Lee WS, Lim SL, Burhanuddin SNM |
3356 - 3360 |
Modeling the capacitive deionization batch mode operation for desalination Jande YAC, Kim WS |
3361 - 3366 |
Inhibition effect of synthesized cationic surfactant on the corrosion of carbon steel in 1 M HCl Badr EA |
3367 - 3374 |
Oxidative biodegradation of single-walled carbon nanotubes by partially purified lignin peroxidase from Sparassis latifolia mushroom Chandrasekaran G, Choi SK, Lee YC, Kim GJ, Shin HJ |
3375 - 3386 |
Decolorisation of aqueous crystal violet solution by a new nanoporous carbon: Equilibrium and kinetic approach Guzel F, Saygili H, Saygili GA, Koyuncu F |
3387 - 3393 |
Glass beads coated with chitosan for the food azo dyes adsorption in a fixed bed column Vieira MLG, Esquerdo VM, Nobre LR, Dotto GL, Pinto LAA |
3394 - 3399 |
Removal of chromium(VI) from aqueous solution using manganese oxide nanofibers Qusti AH |
3400 - 3407 |
Adsorptive removal of nitrate from synthetic and commercially available bottled water samples using De-Acidite FF-IP resin Naushad M, Khan MA, ALOthman ZA, Khan MR |
3408 - 3414 |
Biosorption of heavy metals on Citrus maxima peel, passion fruit shell, and sugarcane bagasse in a fixed-bed column Chao HP, Chang CC, Nieva A |
3415 - 3420 |
Synthesis and characterization of mercury telluride nanoparticles using a new precursor Sangsefidi FS, Salavati-Niasari M, Esmaeili-Zare M |
3421 - 3424 |
A study on thermal conductivity of electroless Ni.B plated multi-walled carbon nanotubes-reinforced composites Choi JR, Lee YS, Park SJ |
3425 - 3429 |
A sonochemical-assisted method for synthesis of BaFe12O19 nanoparticles and hard magnetic nanocomposites Nabiyouni G, Ghanbari D, Yousofnejad A, Seraj M |
3430 - 3439 |
In situ and green synthesis of silver nanoparticles and their biological activity Aiad I, El-Sukkary MM, Soliman EA, El-Awady MY, Shaban SM |
3440 - 3445 |
Preparation and characterization of polyacrylonitrile-based carbon fiber papers Kim S, Kuk YS, Chung YS, Jin FL, Park SJ |
3446 - 3452 |
Solvent extraction of Fe3+ from the hydrochloric acid route phosphoric acid by D2EHPA in kerosene Jin Y, Ma Y, Weng Y, Jia X, Li J |
3453 - 3460 |
Aggregational behavior of alkanediyl-α, ω-bis(tetradecyldimethylammonium) dibromide series with ionic and nonionic hydrotropes at different temperatures Khanam AJ, Sheikh MS, Khan IA, Kabir-ud-Din |
3461 - 3466 |
Preparation and characterization of activated carbon from aquatic macrophyte debris and its ability to adsorb anthraquinone dyes Chu SY, Xiao JB, Tian GM, Wong MH |
3467 - 3473 |
Removal of Pb2+ and Cd2+ from aqueous solution using chars from pyrolysis and microwave-assisted hydrothermal carbonization of Prosopis africana shell Elaigwu SE, Rocher V, Kyriakou G, Greenway GM |
3474 - 3479 |
Structure and electrochemical properties of electrospun carbon fiber composites containing graphene Kim BH, Yang KS |
3480 - 3486 |
Kinetics of calcium carbonate precipitation through CO2 absorption from flue gas into distiller waste of soda ash plant Alamdari A, Alamdari A, Mowla D |
3487 - 3492 |
Electrochemical control of the conversion of cellulose oligosaccharides into glucose Yang F, Zhang Q, Fan HX, Li Y, Li G |
3493 - 3501 |
Investigation of potential conjugate adsorbent for efficient ultra-trace gold(III) detection and recovery Awual MR |
3502 - 3506 |
Silicon carbide nanoparticles as an adsorbent for solid phase extraction of lead and determination by flame atomic absorption spectrometry Pourreza N, Naghdi T |
3507 - 3512 |
Sonochemical synthesis of La(OH)3 nanoparticle and its influence on the flame retardancy of cellulose acetate nanocomposite Jamshidi P, Ghanbari D, Salavati-Niasari M |
3513 - 3517 |
Surface chemistry of cerium oxide nanocubes: Toxicity against pathogenic bacteria and their mechanistic study Krishnamoorthy K, Veerapandian M, Zhang LH, Yun K, Kim SJ |
3518 - 3523 |
Sonochemical synthesis of HgSe nanoparticles: Effect of metal salt, reaction time and reductant agent Esmaeili-Zare M, Salavati-Niasari M, Sobhani A |
3524 - 3535 |
Inhibition of mild steel corrosion in acidic medium by some cationic surfactants Aiad I, El-Sukkary MM, Soliman EA, El-Awady MY, Shaban SM |
3536 - 3542 |
Flame retardancy and thermal degradation behavior of red gum wood treated with hydrate magnesium chloride Wu Y, Yao C, Hu Y, Yang S, Qing Y, Wu Q |
3543 - 3549 |
Simultaneous removal of Pb(II) and Cr(III) by magnetite nanoparticles using various synthesis conditions Wang T, Jin X, Chen Z, Megharaj M, Naidu R |
3550 - 3558 |
Competitive adsorption of methylene blue and brilliant green onto graphite oxide nano particle following: Derivative spectrophotometric and principal component-artificial neural network model methods for their simultaneous determination Zeinali N, Ghaedi M, Shafie G |
3559 - 3567 |
Synthesis of magnetic multi-walled carbon nanotubes/magnetite/chitin magnetic nanocomposite for the removal of Rose Bengal from real and model solution Salam MA, El-Shishtawy RM, Obaid AY |
3568 - 3577 |
Fabrication, characterization, transportation of ions and antibacterial potential of polystyrene based Cu3 (PO4)2/Ni3 (PO4)2 composite membrane Arsalan M, Rafiuddin |
3578 - 3583 |
Characterization of nanoprecipitates formed from the forced hydrolysis of bioleach liquors under different pH conditions Ndlovu S, Simate GS, Mchibwa KA, Giaveno A |
3584 - 3589 |
Effect of the addition of carbon black and carbon nanotube to FeS2 cathode on the electrochemical performance of thermal battery Choi Y, Cho S, Lee YS |
3590 - 3595 |
Catalyst usage of micro concentration of Mn(II) for the oxidation of biotin by peroxomonosulphate in aqueous medium: A mechanistic approach Khan AAP, Khan A, Asiri AM, Rub MA |
3596 - 3603 |
Synthesis and characterization of a new nanocomposite cation exchanger polyacrylamide Ce(IV) silicophosphate: Photocatalytic and antimicrobial applications Pathania D, Sharma G, Naushad M, Kumar A |
3604 - 3611 |
Catalytic activity of metal impregnated catalysts for degradation of waste polystyrene Shah J, Jan MR, Adnan |
3612 - 3622 |
Inhibition of mild steel corrosion in acidic medium using coconut coir dust extracted from water and methanol as solvents Umoren SA, Obot IB, Israel AU, Asuquo PO, Solomon MM, Eduok UM, Udoh AP |
3623 - 3630 |
Adsorption of phosphate using calcined Mg3-Fe layered double hydroxides in a fixed-bed column study Sun XF, Imai T, Sekine M, Higuchi T, Yamamoto K, Kanno A, Nakazono S |
3631 - 3638 |
Surfactant-free waterborne hybrid alkyd-acrylic dispersion: Synthesis, properties and long term stability Elrebii M, Boufi S |
3639 - 3645 |
Study of effective parameters in silver nanoparticle synthesis through method of reverse microemulsion Nourafkan E, Alamdari A |
3646 - 3648 |
Application of MnTiO3 nanoparticles as coating layer of high performance TiO2/MnTiO3 dye-sensitized solar cell Shaterian M, Barati M, Ozaee K, Enhessari M |
3649 - 3657 |
Interacting behavior between amino sulfonate amphoteric surfactant and octylphenol polyoxyethylene ether (7) in aqueous solution and pH effect Ren ZH |
3658 - 3662 |
Characterization of binary oxide photoactive material and its application for inorganic arsenic removal Reddy DHK, Lee SM, Yang JK, Park YJ |
3663 - 3666 |
Exploitation of the ceramic wastes for the extraction of nano aluminum oxide powder Khalil NM |
3667 - 3671 |
Synthesis of pore-expanded mesoporous materials using waste quartz sand and the adsorption effects of methylene blue Hong JM, Lin B, Jiang JS, Chen BY, Chang CT |
3672 - 3677 |
Preparation of catalytic particle electrodes from steel slag and its performance in a three-dimensional electrochemical oxidation system Wang Z, Qi J, Feng Y, Li K, Li X |
3678 - 3688 |
Experimental investigation on enhancing aqueous cadmium removal via nanostructure composite of modified hexagonal type mesoporous silica with polyaniline/polypyrrole nanoparticles Javadian H, Sorkhrodi FZ, Koutenaei BB |
3689 - 3694 |
Alcoholysis of canola oil using a short-chain (C1.C3) alcohols Hong IK, Park JW, Kim H, Lee SB |
3695 - 3702 |
Kinetic study for photocatalytic degradation of Direct Red 23 in UV-LED/nano-TiO2/S2O82- process: Dependence of degradation kinetic on operational parameters Rasoulifard M, Fazli M, Eskandarian M |
3703 - 3708 |
YSZ-carbonate dual-phase membranes for high temperature carbon dioxide separation Ahn H, Kim D, Melgar VMA, Kim J, Othman MR, Nguyen HVP, Han J, Yoon SP |
3709 - 3713 |
Hydrothermal synthesis of CuS nanostructures and their application on preparation of ABS-based nanocomposite Ghanbari D, Salavati-Niasari M, Esmaeili-Zare M, Jamshidi P, Akhtarianfar F |
3714 - 3725 |
Enhanced adsorption of synthetic dyes from aqueous solution by a semi-interpenetrating network hydrogel based on starch Bhattacharyya R, Ray SK |
3726 - 3736 |
Removal of Mn(II) from groundwater by sugarcane bagasse and activated carbon (a comparative study): Application of response surface methodology (RSM) Esfandiar N, Nasernejad B, Ebadi T |
3737 - 3743 |
Nano-alumina coated with SDS and modified with salicylaldehyde-5-sulfonate for extraction of heavy metals and their determination by anodic stripping voltammetry Rajabi M, Mohammadi B, Asghari A, Barfi B, Behzad M |
3744 - 3753 |
Fabrication of polyvinylidene difluoride nano-hybrid dialysis membranes using functionalized multiwall carbon nanotube for polyethylene glycol (hydrophilic additive) retention Chan KH, Wong ET, Khan MI, Idris A, Yusof NM |
3754 - 3760 |
Application of benthonic microbial fuel cells and electro-Fenton process to dye decolourisation Fernandez de Dios MA, Iglesias O, Bocos E, Pazos M, Sanroman MA |
3761 - 3766 |
Photocatalytic removal of cyanide by cobalt metal doped on TiO2.SiO2 nanoparticles by photo-assisted deposition and impregnation methods Baeissa ES |
3767 - 3774 |
Optimization of barrel plating process for electroless Ni-P plating Hong IK, Kim H, Lee SB |
3775 - 3779 |
Effect of preparation conditions on synthesis of Ag2Se nanoparticles by simple sonochemical method assisted by thiourea Jafari M, Sobhani A, Salavati-Niasari M |
3780 - 3788 |
AgSCN micro/nanostructures: Facile sonochemical synthesis, characterization, and photoluminescence properties Soofivand F, Salavati-Niasari M, Mohandes F |
3789 - 3792 |
Preparation and characterization of polyacrylonitrile-based carbon fibers produced by electron beam irradiation pretreatment Shin HK, Park M, Kang PH, Choi HS, Park SJ |
3793 - 3799 |
Natural potato or carbon nanorods, spheres, spiral and nanoparticle structures Salavati-Niasari M, Sheikhiabadi PG |
3800 - 3807 |
CuInS2 nanostructures: Synthesis, characterization, formation mechanism and solar cell applications Hosseinpour-Mashkani SM, Salavati-Niasari M, Mohandes F |
3808 - 3814 |
Removal of malachite green from the contaminated water using a water-soluble melamine/maleic anhydride sorbent Rong X, Qiu F, Qin J, Yan J, Zhao H, Yang D |
3815 - 3820 |
Performance of hydrate inhibitors in tetrahydrofuran hydrate formation by using measurement of electrical conductivity Karamoddin M, Varaminian F |
3821 - 3825 |
Synthesis and characterization of CdS/Bi2S3 nanocomposite via simple microwave approach Ebadi M, Abedini S, Rezai O, Rad MM |
3826 - 3833 |
Visible light assisted photocatalytic performance of Ni and Th co-doped ZnO nanoparticles for the degradation of methylene blue dye Vignesh K, Rajarajan M, Suganthi A |
3834 - 3840 |
Hydrogenation of succinic acid to tetrahydrofuran over ruthenium-carbon composite catalysts: Effect of HCl concentration in the preparation of the catalysts Hong UG, Kim JK, Lee J, Lee JK, Song JH, Yi J, Song IK |
3841 - 3850 |
Molecular interactions of cationic gemini surfactants (m-s-m) with an environmental friendly nonionic sugar-based surfactant (β-C12G): Interfacial, micellar and aggregation behavior Aslam J, Siddiqui US, Bhat IA, Kabir-ud-Din |
3851 - 3856 |
NOx removal of mortar mixed with titania produced from Ti-salt flocculated sludge Park SM, Chekli L, Kim JB, Shahid M, Shon HK, Kim PS, Lee WS, Lee WE, Kim JH |
3857 - 3868 |
Mixed matrix membranes incorporated with cubic-MOF-5 for improved polyetherimide gas separation membranes: Theory and experiment Arjmandi M, Pakizeh M |
3869 - 3874 |
Heterostructured metal sulfide (ZnS-CuS-CdS) photocatalyst for high electron utilization in hydrogen production from solar water splitting Hong E, Kim D, Kim JH |
3875 - 3883 |
Porosity and acidity patterns of steam treated BEA zeolite material for enhanced catalytic isomerization of naphtha Saxena SK, Viswanadham N, Garg MO |
3884 - 3889 |
Magnetically separable attapulgite-TiO2-FexOy composites with superior activity towards photodegradation of methyl orange under visible light radiation Zhang J, Zhang L, Zhou S, Chen H, Zhong H, Zhao Y, Wang X |
3890 - 3900 |
Synthesis and characterization of polyaniline/γ-alumina nanocomposite: A comparative study for the adsorption of three different anionic dyes Javadian H, Angaji MT, Naushad M |
3901 - 3904 |
Electromagnetic interference shielding behaviors of carbon fibers-reinforced polypropylene matrix composites: II. Effects of filler length control Hong MS, Choi WK, An KH, Kang SJ, Park SJ, Lee YS, Kim BJ |
3905 - 3912 |
Enhancement the detection of Ni2+ and Zn2+ ions using nanostructure of synthesized dithiol surfactants with gold nanoparticles Azzam EMS, El-farargy AFM, Abd-Elaal AA |