화학공학소재연구정보센터

Journal of Industrial and Engineering Chemistry

Journal of Industrial and Engineering Chemistry, Vol.18, No.3, May, 2012 Entire volume, number list
ISSN: 1226-086X (Print) 

In this Issue (50 articles)

871 - 875 Removal of F-, NO3-, and PO43- ions from aqueous solution by aminoclays
Lee YC, Kim EJ, Shin HJ, Choi M, Yang JW
876 - 879 Performance enhancement of polymer electrolyte membrane fuel cell by employing line-patterned Nafion membrane
Bae JW, Cho YH, Sung YE, Shin K, Jho JY
880 - 881 H2 production over co-precipitated Ni-MgO-Al2O3 catalysts for direct internal reforming (DIR) in a molten carbonate fuel cell (MCFC)
Roh HS, Joshi UD, Jung YS, Seo YS, Yoon WL, Lee TW
882 - 887 Bench-scale ex situ diesel removal process using a biobarrier and surfactant flushing
Lee YC, Woo SG, Choi ES, Ahn Y, Park J, Lee M, Yang JW
888 - 897 Barrel plating process specification for undercoating with copper cyanate
Han KH, Lee SB, Hong IK
898 - 903 Preparation of gadolinia doped ceria via metal complex decomposition method:Its application as catalyst for the steam reforming of ethane
Veranitisagul C, Koonsaeng N, Laosiripojana N, Laobuthee A
904 - 908 L-Menthol crystal micronized by rapid expansion of supercritical carbon dioxide
Suankaew N, Matsumura Y, Saramala I, Ruktanonchai UR, Soottitantawat A, Charinpanitkul T
909 - 918 Synthesis and characterization of polyvinyl amine-SiO2-Al2O3 as a new and inexpensive organic-inorganic hybrid basic catalyst
Kalbasi RJ, Kolahdoozan M, Rezaei M
919 - 925 Preparation of porous, nano-sized urea.formaldehyde polymer powder
Lee CT
926 - 933 Combining coagulation, softening and flocculation to dispose reverse osmosis retentates
Ordonez R, Moral A, Hermosilla D, Blanco A
934 - 940 New chitosan/Konjac glucomannan blending membrane for application in pervaporation dehydration of caprolactam solution
Lin W, Li Q, Zhu T
941 - 947 Study of solvent casting/particulate leaching technique membranes in pervaporation for dehydration of caprolactam
Lin W, Li Q, Zhu T
948 - 956 Synthesize of polypyrrole nanocomposite and its application for nitrate removal from aqueous solution
Pahlavanzadeh H, Katal R, Mohammadi H
957 - 962 Degradation of phenol by heterogeneous Fenton reaction using Fe/clinoptilolite
Bayat M, Sohrabi M, Royaee SJ
963 - 968 Separation of the catechol/4-methoxyphenol mixture by stripping crystallization
Shiau LD, Zeng SL
969 - 978 Hydrogen production from methanol steam reforming over Cu-Ti-P oxide catalysts
Kim S, Kang M
979 - 985 Water uptake and mechanical properties of natural rubber-styrene butadine rubber (nr-sr) - Nanoclay composites
Mohan TP, Kuriakose J, Kanny K
986 - 992 Synthesis, characterization and catalytic application of bi- and trimetallic Al-HMS supported catalysts in hydroconversion of n-heptane
Peyrovi MH, Hamoule T, Sabour B, Rashidzadeh M
993 - 1000 Synthesis and characterization of polylactide.poly(methyl methacrylate) copolymer by combining of ROP and AGET ATRP
Choochottiros C, Park E, Chin IJ
1001 - 1005 Separation of zinc and cadmium from nickel and cobalt by facilitated transport through bulk liquid membrane using trioctyl methyl ammonium chloride as carrier
Dalali N, Yavarizadeh H, Agrawal YK
1006 - 1012 Multiple biosorption-desorption cycles in a fixed-bed column for Pb(II) removal by acid-treated olive stone
Martı´n-Lara MA, Bla´zquez G, Ronda A, Rodrı´guez IL, Calero M
1013 - 1017 Energetics of molecular interactions of 1,4-dioxane with formamides or anilines at 308.15 K
Maken A, Maken S
1018 - 1022 Synthesis of dimethyl carbonate from urea and methanol over ZnO(X)-CeO2(1-X) catalysts prepared by a sol-gel method
Joe W, Lee HJ, Hong UG, Ahn YS, Song CJ, Kwon BJ, Song IK
1023 - 1028 CNT-Pt counter electrode prepared using a polyol process to achieve high performance in dye-sensitised solar cells
Im JS, Lee SK, Yun J, Lee YS
1029 - 1032 High efficiency deep blue phosphorescent organic light-emitting diodes using a tetraphenylsilane based phosphine oxide host material
Kim OY, Lee JY
1033 - 1038 TiO2 nanoparticles and nanofibres from TiCl4 flocculated sludge: Characterisation and photocatalytic activity
Saliby IE, Okour Y, Shon HK, Kandasamy J, Lee WE, Kim JH
1039 - 1050 Optimization of operating parameters for liquid-cooled PEM fuel cell stacks using Taguchi method
Solehati N, Bae J, Sasmito AP
1051 - 1057 The characteristics and application of grain-slag media in a biological aerated filter (BAF)
Feng Y, Yu Y, Qiu L, Zhang J, Gao L
1058 - 1062 Decolorization of antraquinonic dye, Reactive Blue 114 from synthetic wastewater by Fenton process: Kinetics and thermodynamics
Karatas M, Argun YA, Argun ME
1063 - 1068 Biodegradable poly(lactic acid)-based hybrid coating materials for food packaging films with gas barrier properties
Bang G, Kim SW
1069 - 1075 Synthesis and characterization of bis(2,2-dinitropropyl ethylene) formal plasticizer for energetic binders
Chen Y, Kwon Y, Kim JS
1076 - 1081 Nano-aluminum oxide as a reinforcing material for thermoplastic adhesives
Kaboorani A, Riedl B
1082 - 1087 The corrosion resistance characteristics of Ni, Mn, and Zn phosphates in automotive body panel coatings
Oh JE, Kim YH
1088 - 1095 Application of water vapor-permselective alumina.silica composite membrane in methanol synthesis process to enhance CO2 hydrogenation and catalyst life time
Farsi M, Jahanmiri A
1096 - 1101 Oxidative dehydrogenation of n-butane to n-butene and 1,3-butadiene over Mg3(VO4)2/MgO-ZrO2 catalysts: Effect of Mg:Zr ratio of support
Lee JK, Lee H, Hong UG, Lee J, Cho YJ, Yoo Y, Jang HS, Song IK
1102 - 1106 The performance of Nafion®424 in the membrane electrolysis of borax solution
Turan AZ, Elbeyli IY, Bahar T, Kalafatoglu IE
1107 - 1111 Thermo plasticization and characterization of kenaf fiber by benzylation
Chen C, Cho M, Kim BW, Nam JD, Lee Y
1112 - 1121 Kinetic modeling of Fischer-Tropsch synthesis on bimetallic Fe-Co catalyst with phenomenological based approaches
Shiva M, Atashi H, Tabrizi FF, Mirzaei AA
1122 - 1127 Fabrication of hydrophobic self-assembled monolayers (SAM) on the surface of ultra-strength nanocellulose films
Chun SJ, Lee SY, Jeong GY, Kim JH
1128 - 1135 Preparation of highly dispersed and thermally stable nanosized cerium-hafnium solid solutions over silica surface: Structural and catalytic evaluation
Bharali P, Thrimurthulu G, Katta L, Reddy BM
1136 - 1140 Studies on the effects of the concentration in the preparation of C/C composites by the CVI process of propane
Hwang DG, Chung GY
1141 - 1148 Effects of hydrothermal temperature and acid concentration on the transition from titanate to titania
Kim S, Kim M, Hwang SH, Lim SK
1149 - 1152 Sorption of methane, hydrogen and carbon dioxide on metal-organic framework, iron terephthalate (MOF-235)
Anbia M, Hoseini V, Sheykhi S
1153 - 1156 Oxidehydrogenation of propane to propylene over Sr.V.Mo catalysts: Effects of reaction temperature and space time
Putra MD, Al-Zahrani SM, Abasaeed AE
1157 - 1165 Enhancement of dimethyl ether production with application of hydrogenpermselective Pd-based membrane in fluidized bed reactor
Mardanpour MM, Sadeghi R, Ehsani MR, Esfahany MN
1166 - 1170 Lifetime prediction and thermal aging behaviors of SBR and NBR composites using crosslink density changes
Choi SS, Kim JC
1171 - 1177 Reduction crystallization of Ni, Cu, Fe and Co from a mixed metal effluent
Phetla TP, Ntuli F, Muzenda E
1178 - 1185 Self-assembled flower-like TiO2 on exfoliated graphite oxide for heavy metal removal
Lee YC, Yang JW
1186 - 1190 Synthesis of a fluorescent and star-shaped 4-arm PEG with different functional groups at its ends
Lee DI, Kim CJ, Lee CH, Ahn IS
1191 - 1195 Silver reduction on the surface of magnetite nanoparticles using a coupling agent
Lee B, Koo S