581 - 585 |
An efficient microwave-assisted Suzuki reaction using Pd/MCM-41 and Pd/SBA-15 as catalysts in solvent-free condition Chang W, Chae GH, Jang SR, Shin J, Ahn BJ |
586 - 590 |
Synthesis of silver nanostructures on polytetrafluoroethylene (PTFE) using electron beam irradiation for antimicrobacterial effect Yoon HJ, Kim SE, Kwon YK, Kim EJ, Lee JC, Lee YS |
591 - 593 |
Application of new porous binder material in fluid catalytic cracking reaction Gao X, Tang Z, Lu G, Zhang H, Wang B |
594 - 596 |
Thermo-mechanical behaviors of epoxy resins reinforced with nano-Al2O3 particles Jiang W, Jin FL, Park SJ |
597 - 603 |
Kinetics study of CO hydrogenation on a precipitated iron catalyst Pour AN, Housaindokht MR, Zarkesh J, Irani M, Babakhani EG |
604 - 610 |
A novel membrane on pervaporation performance for dehydration of Caprolactam solution Li Q, Yu P, Lin Y, Zhu T, Luo Y |
611 - 616 |
Synthesis of PEG hydrogel with dityrosine for multi-functionality and pH-dependent fluorescence Choi JY, Lee DI, Kim CJ, Lee CH, Ahn IS |
617 - 622 |
Cooling domain prediction of HFCs and HCFCs refrigerant with Joule-Thomson coefficient Han KH, Noh SP, Hong IK, Park KA |
623 - 628 |
Correlation of increased antioxidation with the phenolic compound and amino acids contents of Camellia sinensis leaf extracts following ultra high pressure extraction Joo CG, Lee KH, Park C, Joo IW, Choe TB, Lee BC |
629 - 634 |
Selective separation of cobalt and nickel by flat sheet supported liquid membrane using Alamine 300 as carrier Surucu A, Eyupoglu V, Tutkun O |
635 - 641 |
Diluent filler particle size effect for thermal stability of epoxy type resin Lee SB, Lee HJ, Hong IK |
642 - 647 |
Improved capacitance characteristics of activated carbon-based electrodes by physicochemical base-tuning Jung MJ, Jeong E, Lee SI, Lee YS |
648 - 654 |
Selective acetylation of glycerol over CeO2-M and SO4^(2-)/CeO2-M (M = ZrO2 and Al2O3) catalysts for synthesis of bioadditives Reddy PS, Sudarsanam P, Raju G, Reddy BM |
655 - 660 |
Synergistic effect of potassium metal siliconate on silicate conversion coating for corrosion protection of galvanized steel Min J, Park JH, Sohn HK, Park JM |
661 - 663 |
Improved efficiency of inverted organic solar cells using organic hole collecting interlayer Jeon SO, Lee JY |
664 - 667 |
Carbonyl iron particles dispersed in a polymer solution and their rheological characteristics under applied magnetic field Kim MS, Liu YD, Park BJ, You CY, Choi HJ |
668 - 673 |
A study on utilization of stainless steel wire cloth as a catalyst support Kim KJ, Ahn HG |
674 - 679 |
Effects of oxyfluorination on a multi-walled carbon nanotube electrode for a high-performance glucose sensor Yu HR, Kim JG, Im JS, Bae TS, Lee YS |
680 - 683 |
In vitro skin permeation and cellular protective effects of flavonoids isolated from Suaeda asparagoides extracts Park SN, Kim SY, Lim GN, Jo NR, Lee MH |
684 - 689 |
A new fluoride mediated synthesis of mesoporous silica and their usefulness in controlled delivery of duloxetine hydrochloride a serotonin re-uptake inhibitor Ganesh M, Hemalatha P, Mei PM, Rajasekar K, Jang HT |
690 - 696 |
Application of nano-sized cobalt on ZSM-5 zeolite as an active catalyst in Fischer-Tropsch synthesis Dalil M, Sohrabi M, Royaee SJ |
697 - 701 |
Improvement of ink and heavy metal removal from old corrugated container stock by alkali kneading Cho BU, Ryu JY, Song BK |
702 - 706 |
Enhancement of immobilized enzyme activity by pretreatment of β-glucosidase with cellobiose and glucose Jung YR, Shin HY, Song YS, Kim SB, Kim SW |
707 - 714 |
Split addition of enzymes in enzymatic hydrolysis at high solids concentration to increase sugar concentration for bioethanol production Xue Y, Jameel H, Phillips R, Chang HM |
715 - 719 |
Enhancing hydrogen production efficiency in microbial electrolysis cell with membrane electrode assembly cathode Jia YH, Ryu JH, Kim CH, Lee WK, Tran TVT, Lee HL, Zhang RH, Ahn DH |
720 - 725 |
The role of Fe on PtPd oxidation catalyst prepared by simultaneous and sequential incipient wetnesses Kim YS, Lim SJ, Kim YH, Lee JH, Lee HI |
726 - 730 |
Effects of the structural characteristics of carbon cathode on the initial voltage delay in Li/SOCl2 battery Ko YO, Lee CT |
731 - 736 |
Ga2O3/HZSM-48 for dehydrogenation of propane: Effect of acidity and pore geometry of support Ren Y, Wang J, Hua W, Yue Y, Gao Z |
737 - 743 |
Removal of aqueous Fe2+ using MnO2-clinoptilolite in a batch slurry reactor: Catalyst synthesis, characterization and modeling of catalytic behavior Azar RP, Falamaki C |
744 - 751 |
Preparation of monodispersed PNIPAm/silica composites and characterization of their thermal behaviors Lee YG, Park CY, Song KH, Kim SS, Oh SG |
752 - 756 |
Effect of surface modification of graphene oxide on photochemical stability of poly(vinyl alcohol)/graphene oxide composites Han M, Yun J, Kim HI, Lee YS |
757 - 762 |
A novel catalyst of Ni-Mn complex oxides supported on cordierite for catalytic oxidation of toluene at low temperature Huang Q, Zhang ZY, Ma WJ, Chen YW, Zhu SM, Shen SB |
763 - 766 |
Comparable mono and bipolar connection of capacitive deionization stack in NaCl treatment Lee JK, Kim YE, Kim J, Chung S, Ji D, Lee J |
767 - 774 |
Photoluminescent supramolecular liquid crystals formed by hydrogen bonding of non-mesogenic donor and acceptors Lee SJ, Lee J, Lee SW, Lee JH, Jho JY |
775 - 779 |
A stability study of an advanced co-treatment system for dye wastewater reuse Shin CH, Bae JS |
780 - 784 |
Treatment of pollutants in wastewater: Adsorption of methylene blue onto olive-based activated carbon Berrios M, Martı´n MA, Martı´n A |
785 - 791 |
A semi-empirical molecular clustering based lattice model near to and far from the critical region Park S, Lee JH, Yoo KP, Shin MS |
792 - 799 |
Synthesis and three dimensional pattern finishing properties of blocked isocyanate prepolymers Lee US, Kim HY, Jin FL, Park SJ |
800 - 807 |
Cyclic voltammetry for monitoring bacterial attachment and biofilm formation Kang J, Kim T, Tak Y, Lee JH, Yoon J |
808 - 813 |
Effect of oxygen capacity and oxygen mobility of supported Mg3(VO4)2 catalysts on the performance in the oxidative dehydrogenation of n-butane Lee H, Lee JK, Hong UG, Yoo Y, Cho YJ, Lee J, Jang HS, Jung JC, Song IK |
814 - 817 |
Electro-optical and electrochemical properties of poly(2-ethynylthiophene) Choi HK, Jin SH, Park JW, Kim SY, Gal YS |
818 - 821 |
Mediatory role of K, Cu and Mo over Ru/SiO2 catalysts for glycerol hydrogenolysis Liao X, Li K, Xiang X, Wang SG, She X, Zhu Y, Li Y |
822 - 825 |
Assessment of soil washing for Zn contaminated soils using various washing solutions Moon DH, Lee JR, Wazne M, Park JH |
826 - 833 |
Application of modified clays in diazotization and azo coupling reactions in water Chermahini AN, Doukheh M, Hassan HZ, Bostanian M |
834 - 838 |
Production of SrCO3 and (NH4)2SO4 by the dry mechanochemical processing of celestite Bingol D, Aydog˘an S, Bozbas SK |
839 - 847 |
Characteristics of the product from steam activation of sewage sludge Chun YN, Lim MS, Yoshikawa K |
848 - 854 |
Liquid-liquid equilibria and thermo physical properties for 1-methyl-2-pyrrolidinone + heterocyclic nitrogen compounds + hexadecane systems at 298.15 K Shin SH, Hwang IC, Park SJ, In SJ |
855 - 859 |
Species dependent aqueous biphasic extraction of some heavy metals Das D, Sen K |
860 - 864 |
A study on the reaction characteristics of CO2 decomposition using iron oxides Kim SS, Lee SM, Hong SC |
865 - 869 |
Synthesis of 9H-fluoren-9-yl benzodithioates and their application as reversible addition-fragmentation chain transfer agents in living radical polymerization of styrene Liu Y, Lee CH, Jin YZ, Huo J, Lee YS |