화학공학소재연구정보센터

Journal of Materials Science

Journal of Materials Science, Vol.49, No.3 Entire volume, number list
ISSN: 0022-2461 (Print) 

In this Issue (50 articles)

923 - 951 Impact of water-soluble cellulose ethers on polymer-modified mortars
Nguyen DD, Devlin LP, Koshy P, Sorrell CC
952 - 985 Electric pulse consolidation: an alternative to spark plasma sintering
Yurlova MS, Demenyuk VD, Lebedeva LY, Dudina DV, Grigoryev EG, Olevsky EA
986 - 993 A combined experiment and molecular dynamics simulation study on the influence of the crosslinking on the crystallization of comb fluorinated acrylate copolymers
Chen HQ, Lin SL
994 - 1008 Sintering mechanisms of blended Ti6Al4V powder from diffusion path analysis
Xu XY, Nash GL, Nash P
1009 - 1013 Preparation of transparent and conductive cellulose nanocrystals/graphene nanoplatelets films
Valentini L, Bon SB, Fortunati E, Kenny JM
1014 - 1024 Hydrothermal synthesis of lead dioxide/multiwall carbon nanotube nanocomposite and its application in removal of some organic water pollutants
Ghasemi S, Karami H, Khanezar H
1025 - 1033 Modeling of nucleation and growth during vapor condensation on liquid substrates
Anantha P, Cheng T, Wong CC
1034 - 1040 Effect of post-annealing process on the optical properties of lateral composition-modulated GaInP structure grown by molecular beam epitaxy
Park KW, Park CY, Ravindran S, Lee YT
1041 - 1048 Wide distribution of shish-kebab structure and tensile property of micro-injection-molded isotactic polypropylene microparts: a comparative study with injection-molded macroparts
Pan YM, Shi SY, Xu WZ, Zheng GQ, Dai K, Liu CT, Chen JB, Shen CY
1049 - 1057 Influence of heat treatment conditions on the structure of hollow carbon fibers prepared from solid PVA fibers using iodine pretreatment
Fatema UK, Okino F, Gotoh Y
1058 - 1065 Enhanced dielectric and tunable properties of barium strontium titanate thin films through introducing Nd(Zn1/2Ti1/2)O-3 and adjusting Ba/Sr
Sun XH, Yang Y, Zhang QL, Zhou X, Hu ZZ, Huang CH
1066 - 1075 Adsorption and photocatalysis removal of fulvic acid by TiO2-graphene composites
Zhou Q, Zhong YH, Chen X, Liu JH, Huang XJ, Wu YC
1076 - 1089 Fabrication and characterization of PCL/gelatin/chitosan ternary nanofibrous composite scaffold for tissue engineering applications
Gautam S, Chou CF, Dinda AK, Potdar PD, Mishra NC
1090 - 1098 One-step preparation of hierarchical porous carbons from poly(vinylidene chloride)-based block copolymers
Yang J, Bao YZ, Pan PJ
1099 - 1113 Evolution of tin whiskers and subsiding grains in thermal cycling
Wang Y, Blendell JE, Handwerker CA
1114 - 1120 Mechanical response of reaction phases of the TiAl/steel brazed joint under a tensile load
Li YL, Liu W, Zhao C, Hu XW, Sekulic DP
1121 - 1129 Hot working behavior of a WE54 magnesium alloy
Lentz M, Gall S, Schmack F, Mayer HM, Reimers W
1130 - 1137 Kinetics of shrinkage and shape evolution during liquid phase sintering of tungsten heavy alloy
Alvarado-Contreras JA, Olevsky EA, Maximenko AL, German RM
1138 - 1143 Fatigue behaviour of commercially pure aluminium processed by rotary swaging
Abdulstaar MA, Mhaede M, Wollmann M, Wagner L
1144 - 1149 One-pot synthesis of carbon nanotubes from renewable resource: cellulose acetate
Dubrovina L, Naboka O, Ogenko V, Gatenholm P, Enoksson P
1150 - 1156 Hardness and fracture toughness of thermoelectric La3-x Te-4
Ma JM, Firdosy SA, Kaner RB, Fleurial JP, Ravi VA
1157 - 1169 The quaternary Al-Fe-Ni-Si phase equilibria in Al-rich corner: experimental measurement and thermodynamic modeling
Hao D, Hu B, Zhang K, Zhang LJ, Du Y
1170 - 1178 Synthesis of core-shell-structured SBA-15@MgAl2O4 with enhanced catalytic performance of propane dehydrogenation
Zhou SJ, Zhou YM, Zhang YW, Sheng XL, Zhang ZW, Kong J
1179 - 1192 Optoelectronic and thermoelectric properties of KAuX5 (X = S, Se): a first principles study
Khan W, Reshak AH
1193 - 1204 Multicomponent materials from machining chips compacted by equal-channel angular pressing
Lapovok R, Qi YS, Ng HP, Maier V, Estrin Y
1205 - 1214 A first-principles study on the structural, elastic, electronic, and optical properties of CdRh2O4
Guo L, Zhang ST, Feng WJ, Hu G
1215 - 1221 High-performance nanocomposite films: reinforced with chitosan nanofiber extracted from prawn shells
Chen CC, Li DG, Shao X
1222 - 1228 Enhanced thermoelectric properties in polyaniline composites with polyaniline-coated carbon nanotubes
Yan HY, Kou KC
1229 - 1239 New chiral liquid crystalline monomers, polymers, and elastomers derived from menthol derivatives: synthesis and mesomorphism
Hu JS, Liu XF, Meng QB, Zhang Y
1240 - 1245 Fabrication of sub-micrometer graphene ribbon using electrospun nanofiber
Choi WM, Tam TV, Trung NB
1246 - 1255 A microscale formaldehyde gas sensor based on Zn2SnO4/SnO2 and produced by combining hydrothermal synthesis with post-synthetic heat treatment
Tang W, Wang J, Yao PJ, Li XG
1256 - 1266 Morphology and fracture toughness of nanostructured epoxy thermosets containing macromolecular miktobrushes composed of poly(epsilon-caprolactone) and polydimethylsiloxane side chains
Zhang CY, Yi YL, Li L, Zheng SX
1267 - 1278 Effect of hollow sphere size and size distribution on the quasi-static and high strain rate compressive properties of Al-A380-Al2O3 syntactic foams
Santa Maria JA, Schultz BF, Ferguson JB, Gupta N, Rohatgi PK
1279 - 1285 Study of the relationship between crystal structure and luminescence in rare-earth-implanted Ga2O3 nanowires during annealing treatments
Lopez I, Lorenz K, Nogales E, Mendez B, Piqueras J, Alves E, Garcia JA
1286 - 1296 Visualization of solute distributions in dendritic and spheroidized Al grains characterized by both color etching method and electron probe microanalysis
Gao L, Harada Y, Kumai S
1297 - 1305 Effect of sintering temperature and cooling rate on the morphology, mechanical behavior and apatite-forming ability of a novel nanostructured magnesium calcium silicate scaffold prepared by a freeze casting method
Hafezi M, Nezafati N, Nadernezhad A, Yasaei M, Zamanian A, Mobini S
1306 - 1316 Experimental investigation and thermodynamic assessment of the Hf-Ge system
Tang Y, Hu B, Wang J, Du Y, Cheng KM, Liu DD, Yin M, Nash P
1317 - 1327 Explaining the heat capacity of wood constituents by molecular vibrations
Thybring EE
1328 - 1335 Enhancement of electroconductivity of polyaniline/graphene oxide nanocomposites through in situ emulsion polymerization
Imran SM, Kim Y, Shao GN, Hussain M, Choa YH, Kim HT
1336 - 1344 Shifting mechanisms in the initial stage of dye photodegradation by hollow TiO2 nanospheres
Wang B, Li C, Cui H, Zhang J, Zhai JP, Li Q
1345 - 1352 Core-shell-structured cross-linked poly(glycidyl methacrylate)-coated carbonyl iron microspheres and their magnetorheology
Kim SY, Kwon SH, Liu YD, Lee JS, You CY, Choi HJ
1353 - 1358 Effects of annealing ambient on the photoluminescence properties of Si-rich oxide/SiO2 multilayer films containing Si-nanocrystals
Wang XZ, Yu X, Yu W, Feng HN, Wang J, Yin CC, Lu WB, Fu GS
1359 - 1367 Low-temperature thermoelectric and magnetic properties of Ca3-x Bi (x) Co4O9+delta (0 a parts per thousand currency sign x a parts per thousand currency sign 0.30)
Bhaskar A, Lin ZR, Liu CJ
1368 - 1375 Microstructure and properties of Sip/Al-20 wt% Si composite prepared by hot-pressed sintering technology
Liu J, Xiu ZY, Liang X, Li Q, Hussain M, Qiao J, Jiang LT
1376 - 1385 Kraft lignin and silica as precursors of advanced composite materials and electroactive blends
Jesionowski T, Klapiszewski L, Milczarek G
1386 - 1398 Experimental and FEM analysis of the compressive behavior of 3D random fibrous materials with bonded networks
Liu Q, Lu ZX, Zhu M, Yang ZY, Hu ZJ, Li JN
1399 - 1407 Origins of saccharin-induced stress reduction based on observed fracture behavior of electrodeposited Ni films
Soni SK, Sheldon BW, Hearne SJ
1408 - 1425 Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying
Sanjari M, Farzadfar A, Kabir ASH, Utsunomiya H, Jung IH, Petrov R, Kestens L, Yue S
1426 - 1436 Promotion of texture weakening in magnesium by alloying and thermomechanical processing. II: rolling speed
Sanjari M, Kabir ASH, Farzadfar A, Utsunomiya H, Petrov R, Kestens L, Yue S
1437 - 1447 Polyethyleneimine-functionalized large pore ordered silica materials for poorly water-soluble drug delivery
Martin A, Garcia RA, Sen Karaman D, Rosenholm JM