화학공학소재연구정보센터

Journal of Materials Science

Journal of Materials Science, Vol.47, No.9 Entire volume, number list
ISSN: 0022-2461 (Print) 

In this Issue (31 articles)

3925 - 3948 Materials development for intermediate-temperature solid oxide electrochemical devices
Aguadero A, Fawcett L, Taub S, Woolley R, Wu KT, Xu N, Kilner JA, Skinner SJ
3949 - 3952 Simultaneous measurements of thermal conductivity and thermal diffusivity of Se90-xTe5Sn5Inx (x=0, 3, 6, and 9) multi-component chalcogenide glasses
Kumar S, Singh K
3953 - 3960 Effect of casting parameters on the freezing point position of the 304 stainless steel during twin-roll strip casting process by numerical simulation
Li Q, Zhang YK, Liu LG, Zhang P, Zhang Y, Fang Y, Yang QX
3961 - 3970 Adhesive surface interactions of cellulose nanocrystals from different sources
Lahiji RR, Boluk Y, McDermott M
3971 - 3981 Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy
Wu HY, Zhu FJ, Wang SC, Wang WR, Wang CC, Chiu CH
3982 - 3988 Microwave dielectric properties of (1-x)Nd(Co1/2Ti1/2) O-3-x(Ca0.8Sr0.2)TiO3 composite ceramics
Tseng CF, Huang CC
3989 - 3999 A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Hou XN, Hu H, Silberschmidt VV
4000 - 4011 Hot deformation behavior of Ti-15-3 titanium alloy: a study using processing maps, activation energy map, and Zener-Hollomon parameter map
Zhang JQ, Di HS, Wang HT, Mao K, Ma TJ, Cao Y
4012 - 4018 Suppressing the growth of interfacial Cu-Sn intermetallic compounds in the Sn-3.0Ag-0.5Cu-0.1Ni/Cu-15Zn solder joint during thermal aging
Chen WY, Yu CY, Duh JG
4019 - 4027 Control of the structure, morphology and dielectric properties of bismuth titanate ceramics by praseodymium substitution using an intermediate fuel agent-assisted self-combustion synthesis
Krengvirat W, Sreekantan S, Ahmad-Fauzi MN, Chinwanitcharoen C, Kawamura G, Matsuda A
4028 - 4035 Structure and properties of CaF2-B2O3 glasses
Doweidar H, El-Damrawi G, Abdelghany M
4036 - 4041 Interfacial reactions between Sn-57Bi-1Ag solder and electroless Ni-P/immersion Au under solid-state aging
Fuchs C, Schreck T, Kaloudis M
4042 - 4052 Synthesis of A356 Al-high-Ca fly ash composites by pressure infiltration technique and their characterization
Itskos G, Rohatgi PK, Moutsatsou A, DeFouw JD, Koukouzas N, Vasilatos C, Schultz BF
4053 - 4061 Microstructure and texture of Al coating during kinetic spraying and heat treatment
Kang K, Park H, Bae G, Lee C
4062 - 4074 Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov ON, Scott JM, Senkova SV, Meisenkothen F, Miracle DB, Woodward CF
4075 - 4086 Effect of welding parameters on microstructure and mechanical properties of friction stir welded 2219Al-T6 joints
Zhang Z, Xiao BL, Ma ZY
4087 - 4092 Grain boundary self-diffusion in Fe films with a stable nanostructure
Schmidt H, Chakravarty S, Jiang M, Huger E, Parida PK, Geue T, Stahn J, Tietze U, Lott D
4093 - 4100 Tuning the stress induced martensitic formation in titanium alloys by alloy design
Li C, Chen JH, Wu X, Wang W, van der Zwaag S
4101 - 4109 Effects of Ag addition on the microstructure and thermal stability of 6156 alloy
Zhang HF, Zheng ZQ, Lin Y, Luo XF, Zhong J
4110 - 4117 Effects of pulsed magnetic annealing on Goss texture development in the primary recrystallization of grain-oriented electrical steel
Huang JJ, Li LJ, Liu LH, Jiang X, Xia X, Zhai QJ
4118 - 4126 Polyamide 6.9 nanofibres electrospun under steady state conditions from a solvent/non-solvent solution
De Schoenmaker B, Goethals A, Van der Schueren L, Rahier H, De Clerck K
4127 - 4137 Investigation on the competing effects of clay dispersion and matrix plasticisation for polypropylene/clay nanocomposites. Part II: crystalline structure and thermo-mechanical behaviour
Dong Y, Bhattacharyya D
4138 - 4145 Optical and photovoltaic properties of silicon wire solar cells with controlled ZnO nanorods antireflection coating
Baek SH, Noh BY, Shin JK, Kim JH
4146 - 4158 Influence of additions of Zr, Ti-B, Sr, and Si as well as of mold temperature on the hot-tearing susceptibility of an experimental Al-2% Cu-1% Si alloy
Nabawy AM, Samuel AM, Samuel FH, Doty HW
4159 - 4166 Synthesis of Cu3BiS3 and AgBiS2 crystallites with controlled morphology using hypocrellin template and their catalytic role in the polymerization of alkylsilane
Yan JM, Yu J, Zhang WJ, Li YN, Yang XY, Li AM, Yang XK, Wang W, Wang JQ
4167 - 4177 Impact of bleaching pine fibre on the fibre/cement interface
Tonoli GHD, Belgacem MN, Bras J, Pereira-da-Silva MA, Lahr FAR, Savastano H
4178 - 4186 2-Methyl oxazoline-grafted carbon nanofibers: preparation, characterization and their role in elastomeric actuators
Mondal T, Bhowmick AK
4187 - 4193 CdS-sensitized ZnO nanorod arrays coated with TiO2 layer for visible light photoelectrocatalysis
Ouyang JL, Chang ML, Li XJ
4194 - 4199 Tubular hydroxyapatite formation through a hydrothermal process from alpha-tricalcium phosphate with anatase
Kamitakahara M, Takahashi H, Ioku K
4200 - 4204 Complex impedance analysis on a layered perovskite-like ceramic: La3Ti2TaO11
Li CC, Wei XY
4205 - 4209 Surface modification of LiCo1/3Ni1/3Mn1/3O2 with CoAl-MMO for lithium-ion batteries
Yang ZX, Song ZL, Chu G, Kang XX, Ren TQ, Yang WS, Qiao QD