화학공학소재연구정보센터

Journal of Materials Science

Journal of Materials Science, Vol.44, No.16 Entire volume, number list
ISSN: 0022-2461 (Print) 

In this Issue (46 articles)

4211 - 4218 Applications of electron backscatter diffraction to materials science: status in 2009
Randle V
4219 - 4227 Effects of the wrinkled fabric preform on the bending properties of resin transfer molded composites
Do TT, Lee DJ
4228 - 4234 Stress corrosion cracking of 2205 duplex stainless steel in H2S-CO2 environment
Liu ZY, Dong CF, Li XG, Zhi Q, Cheng YF
4235 - 4240 Graphitization behavior of iodine-treated Bombyx mori silk fibroin fiber
Khan MMR, Gotoh Y, Morikawa H, Miura M
4241 - 4245 Influence of annealing on rheological and conductive behaviors of high-density polyethylene/carbon black composites
Cao Q, Song YH, Liu ZH, Zheng Q
4246 - 4251 Sterically hindered phthalocyanines: solution-phase interactions with carbon monoxide
Alarjah M, Paniwnyk L, Peterson IR, Lorimer JP, Walton DJ
4252 - 4257 Energy-efficient green synthesis of Nd:Y2O3 nanopowder by microwave gel combustion
Rekha M, Laishram K, Gupta RK, Malhan N, Satsangi AK
4258 - 4263 Study on Ti fiber reinforced TiAl3 composite by infiltration-in situ reaction
Liu YM, Xiu ZY, Wu GH, Yang WS, Chen GQ, Gou HS
4264 - 4269 Tensile deformation of a Mg-2.54Nd-0.26Zn-0.32Zr alloy at elevated temperature
Ning ZL, Wang GJ, Cao FY, Sun JF, Du JF
4270 - 4278 Free-volume properties and toughening behavior of cyanate ester resin/carboxyl-randomized liquid butadiene-acrylonitrile rubber composites
Zeng MF, Sun XD, Yao XD, Wang Y, Zhang MZ, Wang BY, Qi CZ
4279 - 4285 The effect of skin characteristics on the environmental behavior of die cast AZ91 magnesium alloy
Aghion E, Lulu N
4286 - 4295 Control of morphology in inert-gas condensation of metal oxide nanoparticles
Gordon WO, Morris JR, Tissue BM
4296 - 4302 Novel sintered glass-ceramics from vitrified oil well drill cuttings
Abbe OE, Grimes SM, Fowler GD, Boccaccini AR
4303 - 4307 Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite
Wang X, Chen GQ, Li B, Wu GH, Jiang DM
4308 - 4314 Fracture characteristics of high impact polystyrene under impact fatigue loadings
Yilmaz T, Sahin T, Sinmazcelik T
4315 - 4320 Effect of heat-treatment on CdS and CdS/ZnS nanoparticles
Park K, Yu HJ, Chung WK, Kim BJ, Kim SH
4321 - 4325 Ferroelectric properties of (1-x)Bi(Zn1/2Ti1/2)O-3-xPbZrO(3) ceramics
Khamman O, Tan X, Ananta S, Yimnirun R
4326 - 4333 Development of sensors based on CuO-doped SnO2 hollow spheres for ppb level H2S gas sensing
He LF, Jia Y, Meng FL, Li MQ, Liu JH
4334 - 4341 Studies on the mechanism of the structural evolution in Cu-Al-Ni elemental powder mixture during high energy ball milling
Vajpai SK, Dube RK, Sharma M
4342 - 4347 Study of dilute Al-Cu solidification by cooling curve analysis
Fornaro O, Palacio HA
4348 - 4353 Effect of annealing parameters on the magnetic properties of NiZn ferrite thin films
Sun K, Lan ZW, Yu Z, Nie XL, Li LZ, Zhao XN
4354 - 4359 Phase transition characteristics and electrical properties of nitrogen-doped GeSb thin films for PRAM applications
Lee SY, Kim HK, Kim JH, Roh JS, Choi DJ
4360 - 4369 Synthesis and characterization of WO3 and WS2 hexagonal phase nanostructures and catalytic test in sulfur remotion
Huirache-Acuna R, Paraguay-Delgado F, Albiter MA, Alvarez-Contreras L, Rivera-Munoz EM, Alonso-Nunez G
4370 - 4378 Experimental and modeling study of the thermal conductivity of SiCp/Al composites with bimodal size distribution
Chu K, Jia CC, Liang XB, Chen H, Guo H, Yin FZ, Qu XH
4379 - 4382 Determination of the fibre volume content in natural fibre-reinforced composites by ultimate analysis
Mahrholz T, Riedel U
4383 - 4388 PWA/silica/PFSA composite membrane for direct methanol fuel cells
Shang FJ, Li L, Zhang YM, Li H
4389 - 4393 Microstructural and mechanical behavior of Zr-based metallic glasses with the addition of Nb
Luo XM, Zhou Y, Lu JQ, Yu GS, Lin JG, Li W
4394 - 4398 Comparison of Ca/P mineralization on the surfaces of poly (epsilon-caprolactone) composites filled with silane-modified nano-apatite
Deng C, Yao N, Lu X, Qu SX, Feng B, Weng J, Yang XB
4399 - 4406 Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle
Konnerth J, Gierlinger N, Keckes J, Gindl W
4407 - 4412 Synthesis of Fe3O4 polyhedra by hydrothermal method: using l-arginine as precipitator
Duan LF, Jia SS, Wang YJ, Chen J, Zhao LJ
4413 - 4421 Structural characteristics and high-temperature oxidation behavior of porous Fe-40 at.%Al alloy
Shen PZ, Song M, Gao HY, He YH, Zou J, Xu NP, Huang BY, Liu CT
4422 - 4428 Preparation and application of Cu/Cr hydrotalcite-like compounds
Jiao QZ, Liu HB, Zhao Y, Zhang Z
4429 - 4442 Microstructural studies of self-supported (1.5-10 mu m) Pd/23 wt% Ag hydrogen separation membranes subjected to different heat treatments
Tucho WM, Venvik HJ, Walmsley JC, Stange M, Ramachandran A, Mathiesen RH, Borg A, Bredesen R, Holmestad R
4443 - 4454 Microstructure and strengthening mechanisms of a cast Mg-1.48Gd-1.13Y-0.16Zr (at.%) alloy
Gao L, Chen RS, Han EH
4455 - 4459 Sol-gel combustion synthesis of nanocrystalline LaMnO3 powders and photocatalystic properties
Li YY, Yao SS, Xue LH, Yan YW
4460 - 4465 Effects of metal oxides addition on the electrochemical performance of M1Ni(3.5)Co(0.6)Mn(0.4)Al(0.5) hydrogen storage alloy
Huang HX, Huang KL, Liu SQ, Zhuang SX, Chen DY
4466 - 4471 Synthesis, characterization, and electrochemical properties of Ni(OH)(2)/ultra-stable Y zeolite composite
Lang JW, Kong LB, Wu WJ, Luo YC, Kang L
4472 - 4481 Influence of high temperature and high acidic conditions on geopolymeric composite material for steel pickling tanks
Chaudhary D, Liu HH
4482 - 4486 Effect of additive composition on microstructure and strength of porous silicon carbide ceramics
Eom JH, Kim YW
4487 - 4490 The cyclic-fatigue behaviour of an epoxy polymer modified with micron-rubber and nano-silica particles
Manjunatha CM, Taylor AC, Kinloch AJ, Sprenger S
4491 - 4494 An hexagonal array of fourfold interconnected hexagonal nodules for modeling auxetic microporous polymers: a comparison of 2D and 3D models
Lim TC, Acharya UR
4495 - 4498 Nanostructuring and fluorescence properties of Eu3+:LiTaO3 in Li2O-Ta2O5-SiO2-Al2O3 glass-ceramics
Tarafder A, Annapurna K, Chaliha RS, Tiwari VS, Gupta PK, Karmakar B
4499 - 4502 Application of thermoelectric power measurements to the study of cold rolled austenitic stainless steels
Capdevila C, De Cock T, Caballero FG, San Martin D, de Andres CG
4503 - 4506 Comment on "study on electrorheological properties of novel polymer-Ce4+ complex"
Ko SW, Choi HJ
4507 - 4509 Preparation of gamma-alumina ceramic foams employing hydrophilated polyester polyurethane sponges
Sifontes AB, Urbina M, Fajardo F, Melo L, Mediavilla M, Carrion N, Brito JL
4510 - 4510 Shape-selective synthesis and opto-electronic properties of Eu3+-doped gadolinium oxysulfide nanostructures (vol 44, pg 3889, 2009)
Thirumalai J, Chandramohan R, Valanarasu S, Vijayan TA, Somasundaram RM, Mahalingam T, Srikumar SR