3989 - 3989 |
Rees Rawlings special issue Boccaccini AR, Grimes RW, Ryan MP, Skinner SJ |
3990 - 3991 |
A tribute to professor Rees Rawlings Bonfield W |
3992 - 4000 |
Creep and creep fracture of commercial aluminium alloys Wilshire B, Scharning PJ |
4001 - 4008 |
Mechanical assessment of autogenous gas tungsten arc weldments of a super alpha-2 alloy Abaszadeh H, Bozorg SFK |
4009 - 4015 |
Effect of anorthite and diopside on dielectric properties of Al2O3/glass composite based on high strength of LTCC substrate Kim J, Hwang S, Sung W, Kim H |
4016 - 4021 |
Mechanical and acid-etching properties of Bi2O3-ZnO-B2O3 glass-containing ceramic fillers Sung W, Kim J, Hwang S, Kim H |
4022 - 4030 |
Crack resistance curve in glass matrix composite reinforced by long Nicalon (R) fibres Dlouhy I, Kotoul M, Vyslouzil T, Chlup Z, Boccaccini AR |
4031 - 4041 |
Oxidation of SiC powders for the preparation of SiC/mullite/alumina nanocomposites He JY, Ponton CB |
4042 - 4049 |
Processing and magnetic properties of metal-containing SiCN ceramic micro- and nano-composites Hauser R, Francis A, Theismann R, Riedel R |
4050 - 4056 |
Current-activated pressure-assisted sintering (CAPAS) and nanoindentation mapping of dual matrix composites Morsi K, Patel VV, Moon KS, Garay JE |
4057 - 4068 |
Developing and characterizing new materials based on waste plastic and agro-fibre Thamae T, Marien R, Chong L, Wu C, Baillie C |
4069 - 4078 |
Investigation of the thermomechanical properties of industrial refractories: the French programme PROMETHEREF Boussuge M |
4079 - 4090 |
Service life prediction for refractory materials Boccaccini DN, Cannio M, Volkov-Husoviae TD, Kamseu E, Romagnoli M, Veronesi P, Leonelli C, Dlouhy I, Boccaccini AR |
4091 - 4098 |
Two-dimensional (2D) and three-dimensional (3D) analyses of plasma-sprayed alumina microstructures for finite-element simulation of Young's modulus Amsellem O, Madi K, Borit F, Jeulin D, Guipont V, Jeandin M, Boller E, Pauchet F |
4099 - 4106 |
The effect of porosity in thermal shock Yuan C, Vandeperre LJ, Stearn RJ, Clegg WJ |
4107 - 4111 |
Effect of plant-derived organic binders on fracture toughness and fatigue of kaolin-based refractories Njogu MS, Nyongesa FW, Aduda BO |
4112 - 4118 |
Thermal shock behaviour of angle-ply and woven dense ceramic-matrix composites Kastritseas C, Smith PA, Yeomans JA |
4119 - 4126 |
Polymer-derived microcellular SiOC foams with magnetic functionality Biasetto L, Francis A, Palade P, Principi G, Colombo P |
4127 - 4134 |
Simple methods to fabricate Bioglass (R)-derived glass-ceramic scaffolds exhibiting porosity gradient Bretcanu O, Samaille C, Boccaccini AR |
4135 - 4142 |
Effect of particle size on kinetics crystallization of an iron-rich glass Romero M, Kovacova M, Rincon JM |
4143 - 4151 |
Production of sintered materials from air pollution control residues from waste incineration Dimech C, Cheeseman CR, Cook S, Simon J, Boccaccini AR |
4152 - 4156 |
Hot-pressed phosphate glass-ceramic matrix composites containing calcium phosphate particles for nuclear waste encapsulation Michie EM, Grimes RW, Boccaccini AR |
4157 - 4162 |
Atomistic simulation of CeO2 surface hydroxylation: implications for glass polishing Stanek CR, Tan AHH, Owens SL, Grimes RW |
4163 - 4166 |
Structural and magnetic properties of Co and Co71Ni29 nanowire arrays prepared by template electrodeposition Xu JX, Xu Y |
4167 - 4174 |
Thermo-elastic behaviour of a natural quartzite: itacolumite Doncieux A, Stagnol D, Huger M, Chotard T, Gault C, Ota T, Hashimoto S |
4175 - 4181 |
Particle size dependence of optical and defect parameters in mechanically milled Fe2O3 Chakrabarti M, Banerjee A, Sanyal D, Sutradhar M, Chakrabarti A |
4182 - 4191 |
Poly(thiophenylanilino) and poly(furanylanilino) polymers Baldwin LC, Chafin AP, Deschamps JR, Hawkins SA, Wright ME, Witker DL, Prokopuk N |
4192 - 4197 |
Influence of silver doping on the physical properties of Mg ferrites Okasha N |
4198 - 4207 |
Synthesis of lamellar mesostructured calcium phosphates using n-alkylamines as structure-directing agents in alcohol/water mixed solvent systems Ikawa N, Oumi Y, Kimura T, Ikeda T, Sano T |
4208 - 4214 |
Effect of sensitization heat treatment on properties of Al-Mg alloy AA5083-H116 Oguocha INA, Adigun OJ, Yannacopoulos S |
4215 - 4219 |
Investigation of the hydrolysis of (3-triethoxysilylpropyl)succinic acid anhydride by means of FT-IR Schramm C, Rinderer B |
4220 - 4225 |
Dielectric properties of Pb[(1-x)(Zr1/2Ti1/2)-x(Zn1/3Ta2/3)]O-3 ceramics prepared by columbite and wolframite methods Banlue W, Vittayakorn N, Huang CC, Cann DP |
4226 - 4229 |
Martensitic phase transformation in single crystal Co5Ni2Ga3 Chen P, Chen K, Wu GH, Zhang XX |
4230 - 4235 |
Catalytic wet oxidations of aromatic compounds over supported copper oxides Onda A, Suzuki Y, Takemasa S, Kajiyoshi K, Yanagisawa K |
4236 - 4246 |
Analytical study of tensile behaviors of UHMWPE/nano-epoxy bundle composites Jana S, Hinderliter BR, Zhong WH |
4247 - 4256 |
Morphology and composition of nickel-boron nanolayer coating on boron carbide particles Dong HY, Zhu XJ, Lu K |
4257 - 4263 |
The effect of annealing on the deformation behaviour and microstructure of crystallized Mg-23.5Ni (wt.%) alloy Eddahbi M, Perez P |
4264 - 4270 |
Synthesis and properties of barium titanate stannate thin films by chemical solution deposition Ihlefeld JF, Borland WJ, Maria JP |
4271 - 4281 |
The role of surface morphology on the strength and failure mode of polymer fibre reinforced single lap joints Tzetzis D |
4282 - 4289 |
Application of the electrochemical machining technique for the characterization of zinc coatings Shibli SMA, Manu R |
4290 - 4296 |
Toughening effect of maleic anhydride grafted linear low density polyethylene on linear low density polyethylene Huang LP, Zhou XP, Cui W, Xie XL, Tong SY |
4297 - 4302 |
High thermal stability PS-b-PEO templated mesoporous titania film Ma B, Ma J, Goh GKL |
4303 - 4308 |
Raw materials selection applied to glass bonding for vitrified CBN grinding wheels Zhang AJ, Li ZH, Li ZC, Zhu YM |
4309 - 4315 |
Toughness and microstructural analysis of superduplex stainless steel joined by plasma arc welding Taban E |
4316 - 4322 |
Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization Liu FJ, Wang HJ, Xue LB, Fan LD, Zhu ZP |
4323 - 4329 |
Atomic force microscopy for the measurement of flexibility of single softwood pulp fibres Navaranjan N, Blaikie RJ, Parbhu AN, Richardson JD, Dickson AR |
4330 - 4339 |
Rolling wear of EPDM and SBR rubbers as a function of carbon black contents: correlation with microhardness Xu D, Karger-Kocsis J, Schlarb AK |
4340 - 4343 |
Gradual phase and morphology transformation of Fe3O4 nanoparticles to alpha-FeOOH nanorods in alcohol/water media in the presence of surfactant F127 Yang Y, Jiang JS |
4344 - 4347 |
Zero-phonon lines of nitrogen-cluster states in GaNxAs1-x : H identified by time-resolved photoluminescence Hantke K, Horst S, Chatterjee S, Klar PJ, Volz K, Stolz W, Ruhle WW, Masia F, Pettinari G, Polimeni A, Capizzi M |
4348 - 4352 |
Indentation grid analysis of nanoindentation bulk and in situ properties of ceramic phases Guicciardi S, Melandri C, Silvestroni L, Sciti D |