화학공학소재연구정보센터

Journal of Materials Science

Journal of Materials Science, Vol.42, No.13 Entire volume, number list
ISSN: 0022-2461 (Print) 

In this Issue (77 articles)

4721 - 4730 Electrochemical study of corrosion inhibition of steel reinforcement in alkaline solutions containing phosphates based components
Etteyeb N, Dhouibi L, Sanchez M, Alonso C, Andrade C, Triki E
4731 - 4737 X-ray diffraction, optical absorption and emission studies on Er3+- and Er3+/Yb3+-doped Li3NbO4 powder
Zhang DL, Kang J, Pun EYB
4738 - 4744 Fabrication of metallic nanowire arrays by electrodeposition into nanoporous alumina membranes: effect of barrier layer
Sharma G, Pishko MV, Grimes CA
4745 - 4752 Effect of CeO2 on dielectric, ferroelectric and piezoelectric properties of PMN-PT (67/33) compositions
Sahoo B, Panda PK
4753 - 4756 Annealing kinetics of gold and iron-gold complex
Ali A, Majid A
4757 - 4762 alpha Transition of polyamide 6 in chemically bonded polyamide 6/polytetrafluoroethylene compounds studied by dynamic mechanical thermal analysis and dielectric thermal analysis
Zhao J
4763 - 4771 Microstructure evolution of laser surface remelted Zn-2.7 wt.%Cu hyperperitectic alloy
Su YP, Lin X, Yang S, Wang M, Huang WD
4772 - 4777 Formation and properties of SnO-MgO-P2O5 glasses
Shyu JJ, Yeh CH
4778 - 4784 Synthesis and physical properties of new oxide AgMnO2
Koriche N, Bouguelia A, Mohammedi M, Trari M
4785 - 4791 Synthesis by the solution combustion process and magnetic properties of iron oxide (Fe3O4 and alpha-Fe2O3) particles
Toniolo J, Takimi AS, Andrade MJ, Bonadiman R, Bergmann CP
4792 - 4800 Fabrication of carbon nanofiber(CNF)-dispersed Al2O3 composites by pulsed electric-current pressure sintering and their mechanical and electrical properties
Hirota K, Takaura Y, Kato M, Miyamoto Y
4801 - 4809 Modulus spectroscopy of lead potassium titanium niobate (Pb0.95K0.1Ti0.25Nb1.8O6) ceramics
Rao KS, Krishna PM, Prasad DM, Gangadharudu D
4810 - 4814 Piezoelectric hydrophones from Optimal Design, II: properties
Reilly CJ, Halloran JW, Silva ECN, De Espinosa FM
4815 - 4823 Synthesis and properties of ellipsoidal hematite/silicone core-shell particles
Nakade M, Ikeda T, Ogawa M
4824 - 4831 Piezoelectric hydrophones from optimal designs, Part I: fabrication
Reilly CJ, Halloran JW, Silva ECN
4832 - 4837 The influence of aluminium on the overall properties of SnO2-based varistors
Parra R, Maniette Y, Varela JA, Castro MS
4838 - 4844 Preparation and characterization of polyurea microcapsules containing colored electrophoretic responsive fluid
Li G, Feng YQ, Li XG, Gao P, Wang J, Xie JY
4845 - 4849 Dependence of the resistivity and the transmittance of sputter-deposited Ga-doped ZnO films on oxygen partial pressure and sputtering temperature
Kim S, Lee WI, Lee EH, Hwang SK, Lee C
4850 - 4857 Structure and properties of fibres from sea-grass (Zostera marina)
Davies P, Morvan C, Sire O, Baley C
4858 - 4869 Reinforcement of hydrated portland cement with high molecular mass water-soluble polymers
Morlat R, Orange G, Bomal Y, Godard P
4870 - 4876 Microwave absorbing properties of activated carbon-fiber felt dipole array/epoxy resin composites
Zou TC, Shi CS, Zhao NQ
4877 - 4886 Morphological control of Fe3O4 particles via glycothermal process
Cho SB, Noh JS, Park SJ, Lim DY, Choi SH
4887 - 4891 Preparation, structural and optical properties of ZnWO4 and CdWO4 nanofilms
Jia RP, Wu QS, Zhang GX, Ding YP
4892 - 4898 The effect of N-2 addition upon the MIG welding process of duplex steels
de Salazar JMG, Soria A, Barrena MI
4899 - 4904 Phase conversion and spectral properties of long lasting phosphor Zn-3 (PO4)(2): Mn2+, Ga3+
Song YH, Zou HF, Gan SC, Deng YF, Hong GY, Meng J
4905 - 4915 Synthesis and selected properties of CrSbVO6 and phase relations in the V2O5-Cr2O3-alpha-Sb2O4 system in the solid state
Filipek E, Dabrowska G
4916 - 4925 Macromolecule-metal complexes ultrathin brushes with nanoscale protrusions grown from self-assembled monolayer by ATRP
Sha K, Li DS, Li YP, Wang SW, Wang JY
4926 - 4934 Synthesis of titanium oxide layers on glass substrates with aqueous refluxed sols (RS) and photocatalytic activities
Ge L, Xu MX, Fang HB
4935 - 4941 Mechanical interaction between single-walled carbon nanotubes during the formation of a bundle
Vodenitcharova T, Mylvaganam K, Zhang LC
4942 - 4946 Effect of coating of graphite particles with polyaniline base on charge transport in epoxy-resin composites
Peliskova M, Vilcakova J, Moucka R, Saha P, Stejskal J, Quadrat O
4947 - 4953 Glucose oxidase electrodes of polyaniline, poly(o-anisidine) their co-polymer as a biosensor: a comparative study
Borole DD, Kapadi UR, Mahulikar PP, Hundiwale DG
4954 - 4959 Effect of mechanical alloying time and carbon nanotube (CNT) content on the evolution of aluminum (Al)-CNT composite powders
Morsi K, Esawi A
4960 - 4966 Low-temperature sintering of SiC reticulated porous ceramics with MgO-Al2O3-SiO2 additives as sintering aids
Yao XM, Tan SH, Zhang XY, Huang ZR, Jiang DL
4967 - 4975 Surface structure, grafted chain length, and dispersion analysis of PBT prepolymer grafted nano-silica
Che JF, Xiao YH, Luan BY, Dong XM, Wang X
4976 - 4986 Preparation and characterisation of nanostructural TiO2-Ga2O3 binary oxides with high surface area derived form particulate sol-gel route
Mohammadi MR, Ghorbani M, Cordero-Cabrera MC, Fray DJ
4987 - 4995 Negative piezoresistivity in continuous carbon fiber epoxy-matrix composite
Wang S, Chung DDL
4996 - 5002 Synthesis of tunable sized capped magnetic iron oxide nanoparticles highly soluble in organic solvents
Dallas P, Bourlinos AB, Niarchos D, Petridis D
5003 - 5006 The synthesis and the magnetic properties of Sm(x)BiY(2-x)Fe5O(12) nanoparticles
Dong B, Yang H, Yu LX, Cui YM, Jin WQ, Feng SH
5007 - 5012 Effect of different polypropylenes and compatibilizers on the rheological, mechanical and morphological properties of nylon 6/PP blends
Agrawal P, Oliveira SI, Araujo EM, Melo TJA
5013 - 5019 Preparation of hydroxyapatite ceramics by hydrothermal hot-pressing method at 300 degrees C
Li JG, Hashida T
5020 - 5028 Vibration behavior of light metals: Al-Zn alloy and Mg-Al-Zn alloy
Hung FY, Lui TS, Chen LH, Chang HW, Chen ZF
5029 - 5035 Effects of macroscopic graphite particulates on the damping behavior of CuAlMn shape memory alloy
Wang QZ, Han FS, Cui CX
5036 - 5045 Characterization and mechanical behavior of ceramic rings
Martinez AGT, Reboredo MM, Cavalieri AL
5046 - 5056 Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures
Sha JJ, Hinoki T, Kohyama A
5057 - 5067 Effect of the thickness of Bi-Te compound and Cu electrode on the resultant Seebeck coefficient in touching Cu/Bi-Te/Cu composites
Yamashita O, Odahara H
5068 - 5073 Single crystalline silicon carbide nanorods synthesized by hydrothermal method
Pei LZ, Tang YH, Zhao XQ, Chen YW
5074 - 5079 Effects of post-deposition chemical treatment on the formation of mesoporous titania films
Kitazawa N, Sato H, Watanabe Y
5080 - 5084 Magnetoelectric and dielectric properties of Ni0.5Cu0.5Fe2O4-Ba0.5Pb0.5Ti0.5Zr0.5O3 ME composites
Kanamadi CM, Kulkarni SR, Patankar KK, Chougule SS, Patil SJ, Chougule BK
5085 - 5093 An experimental investigation of rate-dependent deformation and failure of three titanium alloys
Sarsfield H, Wang L, Petrinic N
5094 - 5104 Behavior of the electrogalvanized and painted carbon steel and low Cu and Cr carbon steel during cyclic and field corrosion tests
Lins VFC, Paranhos RMV, Alvarenga EA
5105 - 5117 (Plasticized) polylactide/clay nanocomposite textile: thermal, mechanical, shrinkage and fire properties
Solarski S, Mahjoubi F, Ferreira M, Devaux E, Bachelet P, Bourbigot S, Delobel R, Coszach P, Murariu M, Ferreira AD, Alexandre M, Degee P, Dubois P
5118 - 5122 Antibacterial property of Ce-bearing stainless steels
Jing HM, Wu XQ, Liu YQ, Lu MQ, Yang K, Yao ZM, Ke W
5123 - 5128 Response to thermal exposure of the mechanically alloyed Al-Ti/C powders
Birol Y
5129 - 5134 Mechanical properties of nanohydroxyapatite reinforced poly(vinyl alcohol) gel composites as biomaterial
Pan YS, Xiong DS, Chen XL
5135 - 5141 Characterization of carbon coatings on SiC monofilaments using Raman spectroscopy
Ward YL, Young RJ, Shatwell RA
5142 - 5146 The influence of diluent gas composition and temperature on SiC nanopowder formation by CVD
Gupta A, Ghosh T, Jacob C
5147 - 5151 Characterization and application of magnetic P (St-co-MAA-co-AM)/SiO2 composite microspheres
Liu ZL, Liu PD, Liu CC, Yao KL, Ning Q, Xi D, Xu HP
5152 - 5158 Photocatalytic inhibition of microbial fouling by anodized Ti6Al4V alloy
Gopal J, George RP, Muraleedharan P, Kalavathi S, Banerjee S, Dayal RK, Khatak HS
5159 - 5164 Proximity-effect correction in electron-beam lithography on metal multi-layers
Yi H, Chang J
5165 - 5169 Preparation and characterization of Y2O3 : Eu phosphors by combustion process
Fu YP
5170 - 5174 The effects of fatty acids on the particle size distribution of the Portland cement
Albayrak AT, Yasar M, Gurkaynak MA, Gurgey I
5175 - 5181 Investigation on influence of sodium- or strontium-modification on corrosion-resistance of Al-11.7%Si alloy
Liao HC, Dong GM, Sun GX
5182 - 5187 A comparison of impression and compression creep behavior of polycrystalline Sn
Park C, Long X, Haberman S, Ma S, Dutta I, Mahajan R, Jadhav SG
5188 - 5195 Grain growth kinetic in xTiO(2)-6 wt. % Bi2O3-(94-x) ZnO (x=0, 2, 4) ceramic system
Yilmaz S, Ercenk E, Toplan HO, Gunay V
5196 - 5202 Carbon dioxide reduction into carbon by mechanically milled wustite
Yamasue E, Yamaguchi H, Nakaoku H, Okumura H, Ishihara KN
5203 - 5216 Mechanical properties of glass fibre reinforced polypropylene disks produced by rotating, expansion and compression injection moulding
Silva CA, Viana JC, van Hattum FWJ, Cunha AM
5217 - 5222 Superplasticity by internal frictional heat under biased cyclic loading
Zhou X, Mukherjee AK
5223 - 5228 Microstructures and dielectric properties of Y/Zn codoped BaTiO3 ceramics
Li B, Zhang SR, Zhou XH, Chen Z, Wang S
5229 - 5238 Correlating yield response with molecular architecture in polymer glasses
Calzia KJ, Lesser AJ
5239 - 5247 Multiple reflow study of ball grid array (BGA) solder joints on Au/Ni metallization
Zhong WH, Chan YC, Wu BY, Alam MO, Guan JF
5248 - 5255 Magnetic properties of nanocrystalline magnesium ferrite by co-precipitation assisted with ultrasound irradiation
Rashad MM
5256 - 5263 Deformation and fracture behavior of electrocodeposited alumina nanoparticle/copper composite films
Gan YX, Wei CS, Lam M, Wei XD, Lee DY, Kysar JW, Chen X
5264 - 5271 Effects of silsesquioxane coating structure on mechanical interfacial properties of carbon fibre/polyarylacetylene composites
Zhang XZ, Huang YD, Wang TY, Hu LJ
5272 - 5280 Microstructure, deformation and failure of polymer bonded explosives
Chen PW, Huang FL, Ding YS
5281 - 5285 Novel counter electrodes based on NiP-plated glass and Ti plate substrate for dye-sensitized solar cells
Wang GQ, Lin Y
5286 - 5295 Laser beam welding of an Oxide Dispersion Strengthened super alloy
Lemmen HJK, Sudmeijer KJ, Richardson IM, van der Zwaag S
5296 - 5298 Superplasticity evaluation in an extruded Mg-8.5Li alloy
Dong SL, Imai T, Lim SW, Kanetake N, Saito N