2851 - 2856 |
Martensitic transformation of an aged/thermal-cycled Ti30.5Ni49.5Zr10Hf10 shape memory alloy Hsieh SF, Chang WK |
2857 - 2864 |
Interfaces and dislocation substructures in a Nb-Ti base alloy: influence of creep deformation Allameh SM, Hayes RW, Loria EA, Soboyejo WO |
2865 - 2869 |
Electrical conductivity and TSDC study of the thermal aging in conductive polypyrrole/polyaniline blends Sakkopoulos S, Vitoratos E, Grammatikakis J, Papathanassiou AN, Dalas E |
2871 - 2884 |
Sensitivity of the theta projection technique to the functional form of the theta interpolation/extrapolation function Evans M |
2885 - 2891 |
High temperature strength at 1773 K and room temperature fracture toughness of Nb-ss/Nb5Si3 in situ composites alloyed with Mo Kim WY, Tanaka H, Hanada S |
2893 - 2897 |
High performance functionally graded and segmented Bi2Te3-based materials for thermoelectric power generation Kuznetsov VL, Kuznetsova LA, Kaliazin AE, Rowe DM |
2899 - 2907 |
Creep deformation and monotonic stress-strain behavior of Haynes alloy 556 at elevated temperatures Abu-Haiba MS, Fatemi A, Zoroufi M |
2909 - 2916 |
Surface repair of porous and damaged alumina bodies using carboxylate-alumoxane nanoparticles Defriend KA, Barron AR |
2917 - 2925 |
Vapour-liquid-solid growth of TiB2 whiskers Carlsson M, Alberius-Henning P, Johnsson M |
2927 - 2935 |
Microstructural evolution in nanocrystalline alumina containing silicate glasses Saha SK, Chaim R |
2937 - 2941 |
Preparation of composite TiO2-zeolite sheets using a papermaking technique and their application to environmental improvement - Part I - Removal of acetaldehyde with and without UV irradiation Ichiura H, Kitaoka T, Tanaka H |
2943 - 2947 |
Strength and machining of gelcast SIC ceramics Vlajic MD, Krstic VD |
2949 - 2963 |
Crack growth in lamellar titanium aluminides containing beta phase precipitates Grujicic M, Cao G |
2965 - 2974 |
Influence of properties at micro- and meso-scopic levels on macroscopic level for weft knitted fabrics Bueno MA, Renner M, Pac MJ |
2975 - 2982 |
Temperature dependence of flexural strength and microstructure of Al2O3/Y3Al5O12/ZrO2 ternary melt growth composites Waku Y, Sakata S, Mitani A, Shimizu K, Hasebe M |
2983 - 2987 |
Interlaminar fracture characterization for plain weave fabric composites Naik NK, Reddy KS, Meduri S, Raju NB, Prasad PD, Azad SNM, Ogde PA, Reddy BCK |
2989 - 2996 |
Synthesis, characterization and photocatalytic property of nano-sized Zn2SnO4 Cun W, Wang XM, Zhao JC, Mai BX, Sheng GY, Peng PA, Fu JM |
2997 - 3003 |
Numerical modeling and experimental verification of mold filling and evolved gas pressure in lost foam casting process Liu Y, Bakhtiyarov SI, Overfelt RA |
3005 - 3022 |
Effects of crystallinity, transcrystallinity and crystal phases of GF/PA on friction and wear mechanisms Cartledge HCY, Baillie CA |
3023 - 3034 |
Ductile layer toughening of brittle intermetallic composites Lou J, Ye F, Li M, Soboyejo WO |
3035 - 3043 |
Study on the formation and growth of potassium titanate whiskers Bao NZ, Feng X, Lu XH, Yang ZH |
3045 - 3051 |
Synthesis of ferroelectric SrxBa1-xNb2O6 bulk ceramics, thin film and multi-layered film Kakimoto KI, Kakemoto H, Baba A, Fujita S, Masuda Y |
3053 - 3057 |
Interfacial chemistry of powdered barium ferrites immersed in aqueous solutions: leaching in acidic chloride media Jacobo S, Regazzoni AE, Blesa MA |
3059 - 3066 |
Processing and characterisation of sol-gel glasses and powders in the system TeO2-TiO2 Hodgson SNB, Weng L |
3067 - 3074 |
Combined effect of fiber content and microstructure on the fracture toughness of SGF and SCF reinforced polypropylene composites Fu SY, Mai YW, Lauke B, Xu GS, Yue CY |
3075 - 3084 |
Load controlled low cycle fatigue of [0](8) Sigma fibre reinforced titanium matrix composite Thomas MP |
3085 - 3088 |
Preparation and characteristic of a new class of silica/polyimide nanocomposites Liu J, Gao Y, Wang FD, Li DC, Xu J |