3567 - 3570 |
Dispersion Characteristics of the Complex Permeability Permittivity of Ni-Zn Ferrite-Epoxy Composites Han KC, Choi HD, Moon TJ, Kim WS, Kim KY |
3571 - 3575 |
Wetting Kinetics of Liquid Aluminum on an Al2O3 Surface Zhou XB, Dehosson JT |
3576 - 3586 |
Strain-Rate and Grain-Size Effect on Substructures and Mechanical-Properties in Ofhc Copper During Tension Shankaranarayan H, Varma SK |
3587 - 3590 |
Mechanical Stability of Rigid-Rod Polymer Fibers Under the Influence of Compression and Temperature Rein DM, Cohen Y |
3591 - 3597 |
Microstructural Evolution of Finemet Type Alloys with Chromium - An Electron-Microscopy Study Millan M, Conde CF, Conde A |
3598 - 3602 |
Metastability of the K2Nif4 Type-Structure of the Solid-Solution Laca(Crxal1-X)O-4(O-Less-Than-or-Equal-to-X-Less-Than-or-Equal-to-0.10) Zvereva I, Zueva L, Choisnet J |
3603 - 3606 |
Surface, Structural and Electrical-Properties of BaTiO3 Films Grown on P-Si Substrates by Low-Pressure Metal-Organic Chemical-Vapor-Deposition Yoon YS, Yom SS, Kim TW, Kim HJ, Jung M, Leem JY, Kang TW, Lee SJ |
3607 - 3611 |
The Study of Microstructure of Bi, Pb-Sr-Ca-Cu-O Superconductors Prepared by Multiple Intermediate Processing Hudakova N, Plechacek V, Knizek K |
3612 - 3618 |
Transport Property and Battery Discharge Characteristic Studies on 1-X (0.75Agl-0.25Agcl)xAl(2)O(3) Composite Electrolyte System Agrawal RC, Gupta RK |
3619 - 3624 |
Wetting and Adhesion of Ni-Al Alloys on Alpha-Al2O3 Single-Crystals Merlin V, Eustathopoulos N |
3625 - 3632 |
Yield Stress Behavior of Metal Injection-Molding Suspensions at Elevated-Temperatures Foong ML, Tam KC, Loh NH |
3633 - 3638 |
Ion-Transport Studies in Peo-NH4I Polymer Electrolytes with Dispersed Al2O3 Chandra A, Srivastava PC, Chandra S |
3639 - 3644 |
Metallic Alloys Suitable for YBCO Melt-Texturing at Low-Temperature Lambert P, Arsenault B |
3645 - 3651 |
Effect of Cobalt Catalyst on the Formation of SiC from Rice Husk Silica-Carbon Black Mixture Krishnarao RV |
3652 - 3657 |
Hardening of 316L Stainless-Steel by Laser-Surface Alloying Laroudie F, Tassin C, Pons M |
3658 - 3661 |
Temperature and Strain-Rate Dependence of Fracture-Toughness of Phenolphthalein Polyether Ketone Han YC, Yang YM, Li BY, Feng ZL |
3662 - 3667 |
Structural Variations in High-Temperature Superconductive YBa2Cu3O7-Delta Ceramic Samples Under High Pressure-High Temperature Conditions Prikhna TA, Melnikov VS, Kovylyaev VV, Moshchil VE |
3668 - 3673 |
Fractal Nature and Quantitative-Evaluation of Microstructures in Metallic Materials Tanaka M |
3674 - 3679 |
Preparation of Uniform Lithium Tantalate Spherical-Particles by 2 Different Aerosol Processes Amiel O, Cazeau P, Salmon R |
3680 - 3689 |
The Structure of a Rapidly Solidified Al-Fe-Ti-C Alloy Tong XC, Shen NF, Liu BC |
3690 - 3696 |
Ductility Improvement in Iron Aluminides Bahadur A, Kumar BR, Mohanty ON |
3697 - 3703 |
Improving the Uniformity in Combustion-Synthesized Titanium Carbide Halverson DC, Ewald KH, Munir ZA |
3704 - 3710 |
Interface Reactions Between YBa2Cu3O7-X and W, Si or WSi2 Bohnenkampweiss R, Schmidfetzer R |
3711 - 3719 |
Numerical-Solution to the Solidification of Aluminum in the Presence of Various Fibers Khan MA, Rohatgi PK |
3720 - 3729 |
The Optical-Properties and AC Conductivity of Magnesium Phosphate-Glasses Alani SK, Alhassany IH, Aldahan ZT |
3730 - 3733 |
Effect of Low Silicon Concentration on High T-C Y-Ba-Cu-O Elhamalawy AA, Aries A, Elzaidia MM |
3734 - 3745 |
Characterization of SiC Whiskers Frevel LK, Saha CK, Petersen DR |