459 - 463 |
Negative ion beam sputter 법으로 증착한 DLC 박막의 특성 (I) Properties of Diamond-like Carbon(DLC) Thin Films deposited by Negative Ion Beam Sputter (I) 김대연, 강계원, 최병호 Kim TY, Kang GW, Choi BH |
464 - 470 |
티타늄의 소결특성에 미치는 산소함량의 영향 The Effect of Oxygen on the Sintering of Titanium Powders 최종석, 이동희, 최국선, 길대섭, 서창열, 김원백, 하호 Choe JS, Lee DH, Choi GS, Kil DS, Suh CY, Kim W, Ha H |
471 - 477 |
LiCl 및 LiCl- Li 2 O 용융염에서 Fe-Ni-Cr 합금의 부식거동 연구 A Study on the Corrosion Behavior of Fe-Ni-Cr Alloys in Molten Salts of LiCl and LiCl- Li 2 O 조수행, 장준선, 홍순선, 신영준, 박현수 Cho SH, Zhang JS, Hong SS, Shin YJ, Park HS |
478 - 481 |
전자 주게가 첨가된 완화형 강유전체 Pb(Mg 1/3 Nb 2/3 )O 2 의 B자리 양이온 질서배열구조 B-site Cationic Ordering Structures of Donor-Doped Relaxor Ferroelectric Pb(Mg 1/3 Nb 2/3 )O 3 차석배, 김병국, 제해준 Cha SB, Kim BK, Je HJ |
482 - 488 |
공기 중에 노출된 MOCVD TiN 기판이 MOCVD Cu 증착에 미치는 효과 Effect of air-contaminated TiN on the deposition characteristics of Cu film by MOCVD 최정환, 변인재, 양희정, 이원희, 이재갑 Choi JH, Byeon IJ, Yang HJ, Lee WH, Lee JG |
489 - 492 |
크롬백주철의 기지조직 및 탄화물에 있어서 합금원소의 거동 The Distribution Behavior of Alloying Elements in Matrices and Carbides of Chromium White Cast Iron 류성곤 Yu SK |
493 - 498 |
7050 Al 합금의 RRA 처리에 관한 연구 A Study on the RRA(Retrogression and Reaging) treatment of 7050 Al alloy 최중환, 김장량, 이상래, 김인배 Choi JW, Kim JR, Lee SL, Kim IB |
499 - 504 |
기계적합금화법을 이용한 고온 고강도 Al-Nb-Zr 합금 제조 및 특성 평가 Elevation of Properties of Al-Nb-Ar alloys Fabricated by Mechanical Alloying Metho 권대환, 안인섭, 김상식, 이광민, 박민우 Kwon DH, Ahn IS, Kim SS, Lee KM, Park MW |
505 - 514 |
플라즈마 침탄한 저탄소 Cr-Mo강의 피로특성에 관한 연구 A study on fatigue properties of plasma carburized low carbon Cr-Mo steel 박경봉, 신동명, 이창열, 이경섭 Park KB, Shin DM, Lee CY, Lee KS |
515 - 521 |
주조용 718합금의 고온 인장 성질에 미치는 석출물의 영향 Effect of Precipitates on the High Temperature Tensile Properties of Cast Alloy 718 주동원, 조창용, 김두현, 류영수, 김인수, 조해용, 최승주 Joo DW, Jo CY, Kim DH, Yoo YS, Kim IS, Cho HY, Choe SJ |