화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.92, No.3 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (90 articles)

1375 - 1387 One-pot synthesis of polymeric bead bearing surface charge
Kusuktham B, Srikulkit K
1388 - 1391 Studies of polypropylene-intumescent flame-retardant composites based on etched polypropylene as a coupling agent
Ma ZL, Gao JG, Bai LG
1392 - 1396 Thermal oxidation of self-degradable composite films based on low-density polyethylene
Ol'khov AA, Shibryaeva LS, Lordanskii AL, Zaikov GE
1397 - 1412 Bulk polymerization of styrene in the presence of polybutadiene: Effect of initiator type and prepolymerization conditions on particle morphology
Soto G, Nava E, Rosas M, Fuenmayor M, Gonzalez IM, Meira GR, Oliva HM
1413 - 1421 Polyester binders for wood containing benzotriazole and HALS light stabilizers
Sundell P, Sundholm F
1422 - 1425 Reduced copper diffusion in layered silicate/fluorinated polyimide (6FDA-ODA) nanocomposites
Jiang LY, Wei KH
1426 - 1431 Rheological properties of water solutions of syndiotactic poly(vinyl alcohol) of different molecular weights
Kim SS, Seo IS, Yeum JH, Ji BC, Kim JH, Kwak JW, Yoon WS, Noh SK, Lyoo WS
1432 - 1436 Design of organic electroluminescent displays with ultraviolet-shielding filters
Lee RH, Huang CY, Chen CT
1437 - 1448 Dynamically cured polypropylene/epoxy blends
Jiang XL, Huang H, Zhang Y, Zhang YX
1449 - 1453 Nylon 6 microfiber prepared by carbon dioxide laser heating
Suzuki A, Kamata K
1454 - 1458 Nylon 6 microfiber obtained method with a carbon dioxide laser
Suzuki A, Kamata K
1459 - 1466 Hyperbranched conjugated polymers for photovoltaic applications
Qiao J, Yang CH, He QG, Bai FL, Li YF
1467 - 1472 Characterization of the water state of hyaluronic acid and poly(vinyl alcohol) interpenetrating polymer networks
Kim SJ, Lee CK, Kim SI
1473 - 1477 Electrostimulus responsive behavior of poly(acrylic acid)/polyacrylonitrile semi-interpenetrating polymer network hydrogels
Kim SJ, Lee KJ, Kim SI
1478 - 1485 Preparation of novel semihomogeneous cation-permeable membranes from blends of sulfonated poly(phenylene sulfide) and sulfonated phenolphthalein poly(ether ether ketone)
Hu KY, Xu TW, Fu YX, Yang WH
1486 - 1492 Surface modification of silicone rubber with poly(ethylene glycol) hydrogel coatings
Vladkova T
1493 - 1500 Study on the mechanical properties of hybrid reinforced rigid polyurethane composite foam
Yang ZG, Zhao B, Qin SL, Hu ZF, Jin ZK, Wang JH
1501 - 1509 Synthesis of functionalized phenolformaldehyde polymer resins by the reaction of 2,4-dihydroxyacetophenone formaldehyde resin with various amines and their metal ion uptake properties
Reddy AR, Reddy KH
1510 - 1515 Sorbents for removal surfactants from aqueous solutions: Surface modification of natural solids to enhance sorption ability
Lukaszczyk J, Lekawska E, Lunkwitz K, Petzold G
1516 - 1520 Synthesis of new soluble aromatic poly(amide imide)s from unsymmetrical extended diamine containing phthalazinone moiety
Cheng L, Jian XG
1521 - 1526 Processing thermal stability and degradation kinetics of poly(vinyl chloride)/montmorillonite composites
Wan CY, Tian GH, Cui N, Zhang YX, Zhang Y
1527 - 1533 Studies on gamma-Fe2O3-high-density polyethylene composites and their additives
Govindaraj B, Sastry NV, Venkataraman A
1534 - 1539 Isotactic polypropylene microfiber prepared by carbon dioxide laser-heating
Suzuki A, Narusue S
1540 - 1547 Synthesis and characterization of spinning poly(acrylonitrile-co-silk fibroin peptide)s
Chen ZM, Suzuki M, Kimura M, Kondo Y, Hanabusa K, Shirai H
1548 - 1552 Rod-climbing characteristics of alpha-Fe2O3 suspended polyisobutylene/polybutene solution
Lim ST, Choi HJ, Jhon MS
1553 - 1558 Novel model for uniaxial strain-rate-dependent stress-strain behavior of ethylene-propylene-diene monomer rubber in compression or tension
Song B, Chen WN, Cheng M
1559 - 1561 Partially miscible blends based on a polyarylate and poly(trimethylene terephthalate)
Guerrica-Echevarria G, Eguiazabal JI, Nazabal J
1562 - 1568 Study of the miscibility and crystallization behavior of poly(ethylene oxide)/poly(vinyl alcohol) blends
Lai WC, Liau WB
1569 - 1575 Grafting of polyacrylonitrile onto guar gum under microwave irradiation
Singh V, Tiwari A, Tripathi DN, Sanghi R
1576 - 1583 Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines
Ramirez C, Vilarino JML, Abad MJ, Barral L, Bouza R, Cano J, Diez FJ, Garcia-Garabal S, Lopez J
1584 - 1588 Studies of adsorption properties of crosslinked chitosan for Vanadium(V), Tungsten(VI)
Qian SH, Wang HY, Huang GQ, Mo SB, Wei W
1589 - 1595 Surface grafting of polyacrylamide from polyethylene-based copolymer film
Luo N, Husson SM, Hirt DE, Schwark DW
1596 - 1603 Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization
Li A, Wang AQ, Chen JM
1604 - 1610 Processing and chemorheology of epoxy resins and their blends with dendritic hyperbranched polymers
Ratna D, Varley R, Simon GP
1611 - 1617 Preparation of positive-temperature coefficient heaters using platinum-catalyzed silicone rubber
Park ES, Yun SJ, Kim GT, Park IJ, Choi WH, Jeong JW, Hong SY, Park HW, Jang LW, Yoon JS
1618 - 1624 Synthesis of superabsorbent resin by ultraviolet photopolymerization
Ruan WQ, Qiao JL, Huang YL, Niu AJ
1625 - 1632 Preparation and properties of hydrophilic-hydrophobic chitosan derivatives
Yang H, Zhou SB, Deng XM
1633 - 1645 Pseudo-first-order kinetic studies of the sorption of acid dyes onto chitosan
Wong YC, Szeto YS, Cheung WH, McKay G
1646 - 1652 Syntheses and adsorption properties for Hg2+ of chelating resin of crosslinked polystyrene-supported 2,5-dimercapto-1,3,4-thiodiazole
Qu RJ, Wang CH, Sun CM, Ji CN, Cheng GX, Wang XQ, Xu G
1653 - 1657 Thermal mechanical and dynamic mechanical property of biphenyl polyimide fibers
Zhang QH, Luo WQ, Gao LX, Chen DJ, Ding MX
1658 - 1665 Use of pyrolysed oil shale as filler in poly(ethylene-co-vinyl alcohol)
Barbosa RV, Baumhardt-Neto R, Mauler RS, Jose C, Gorga P, Schneider CG
1666 - 1671 Effect of molecular weight on brittle-to-ductile transition temperature of polyetherimide
Sanner MA, Haralur G, May A
1672 - 1679 Modification of polystyrene by reactive extrusion with peroxide and trimethylolpropane triacrylate
Kim BK, Shon KH, Jeong HM
1680 - 1687 Crystallization and melting behavior of 1,2-syndiotactic polybutadiene
Bertini F, Canetti M, Ricci G
1688 - 1694 Surface modification of ethylene-co-acrylic acid copolymer films: Addition of amide groups by covalently bonded amino acid intermediates
Luo N, Stewart MJ, Hirt DE, Husson SM, Schwark DW
1695 - 1701 Preparation of silane-terminated polystyrene and polymethylmethacrylate self-assembled films on silicon wafer
Zhou F, Liu WM, Xu T, Liu SJ, Chen M, Liu JX
1702 - 1708 Structure and properties of polyamide 6 blends with low-density polyethylene grafted by itaconic acid and with neutralized carboxyl groups
Pesetskii SS, Krivoguz YM, Jurkowski B
1709 - 1715 Preparation and characterization of sulfonated polyetherimide/polyetherimide blend membranes
Shen LQ, Xu ZK, Yang Q, Sun HL, Wang SY, Xu YY
1716 - 1723 Preparation and characterization of starch/polycaprolactone blend
Kweon DK, Kawasaki N, Nakayama A, Aiba S
1724 - 1730 Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds
Kotek R, Jung DW, Kim JH, Smith B, Guzman P, Schmidt B
1731 - 1736 Electrical/pH responsive properties of poly(2-acrylamido-2-methylpropane sulfonic acid)/hyaluronic acid hydrogels
Kim SJ, Lee CK, Kim SI
1737 - 1748 Thermal and thermooxidative degradation of engineering thermoplastics and life estimation
Gupta YN, Chakraborty A, Pandey GD, Setua DK
1749 - 1757 In situ polymerization of titanium isopropoxide in polycaprolactone: Properties and characterization of the hybrid nanocomposites
Wu CS
1758 - 1764 A governing equation for physical aging of thick and thin fluoropolyimide films
Zhou C, Chung TS, Wang R, Goh SH
1765 - 1770 Study on the macrokinetics of poly(trimethylene terephthalate) polycondensation reaction
Chen KQ, Tang XZ, Chen SW, Fu G
1771 - 1781 Interfacial effects in polypropylene-silica nanocomposites
Rong MZ, Zhang MQ, Pan SL, Friedrich K
1782 - 1789 Morphological study of poly(vinylidene fluoride) asymmetric membranes: Effects of the solvent, additive, and dope temperature
Yeow ML, Liu YT, Li K
1790 - 1803 Effect of water on the oxygen barrier properties of poly(ethylene terephthalate) and polylactide films
Auras R, Harte B, Selke S
1804 - 1812 Water-swelling elastomer prepared by in situ formed lithium acrylate in chlorinated polyethylene
Ren WT, Peng ZL, Zhang Y, Zhang YX
1813 - 1823 Effect of surfactant systems on the water sensitivity of latex films
Butler LN, Fellows CM, Gilbert RG
1824 - 1833 Homopolymerization and copolymerization of tert-butyl methacrylate and norbornene with nickel-based methylaluminoxane catalysts
Huang CF, Wang SK, Kuo SW, Huang WJ, Chang FC
1834 - 1839 The role of additives in the manufacture of sheets of unsaturated polyester and postconsumer unsaturated polyester/glass fiber composites: Mechanical and dynamic mechanical properties
Pedroso AG, Rosa DS, Atvars TDZ
1840 - 1846 Synthesis and degradation behavior of poly(propylene carbonate) derived from carbon dioxide and propylene oxide
Du LC, Meng YZ, Wang SJ, Tjong SC
1847 - 1854 H-1- and C-13-NMR analyses of aqueous polyamideamine-epichlorohydrin resin solutions
Obokata T, Isogai A
1855 - 1862 Friction and wear studies on nylon-6/SiO2 nanocomposites
Garcia M, de Rooij M, Winnubst L, van Zyl WE, Verweij H
1863 - 1868 Synthesis and chain extension of nitroxide-terminated styrene-maleimide copolymers
Lokaj J, Krakovsky I, Holler P, Hanykova L
1869 - 1874 Properties of a few aromatic poly(thioether ketones) as sulfur-containing high-performance polymers
Matsumura S, Kihara N, Takata T
1875 - 1886 Modeling of polyurethane foam formation
Tesser R, Di Serio M, Sclafani A, Santacesaria E
1887 - 1892 Comparison between titanium tetrabutoxide and a new commercial titanium dioxide based catalyst used for the synthesis of poly(ethylene terephthalate)
Finelli L, Lorenzetti C, Messori M, Sisti L, Vannini M
1893 - 1901 Pectin and polyacrylamide composite hydrogels: Effect of pectin on structural and dynamic mechanical properties
Liu LS, Cooke PH, Coffin DR, Fishman ML, Hicks KB
1902 - 1914 Synthesis and characterization of statistical copolymers of styrene and 4-(1-hydroxyalkyl)styrene
Nasrullah JM, Dhamodharan R
1915 - 1938 Effect of degree of polymerization on gelation and flow processability of poly(vinyl chloride)
Fujiyama M, Kondou M
1939 - 1944 Electrochemical polymerization of beta-naphthalene sulfonic acid
Li EH, Huang ZM, Shi GQ, Qu LT, Zhang JX
1945 - 1949 Gas phase polymerization of 1,3-butadiene with supported neodymium-based catalyst: Investigation of molecular weight
Ni XF, Li JF, Zhang YF, Shen ZQ
1950 - 1954 Preparation and performance of aluminum borate whisker-reinforced epoxy composites. I. Effect of whiskers on processing, reactivity, and mechanical properties
Liang GZ, Hu XL
1955 - 1960 Polymerization kinetics and thermal properties of dicyanate/clay nanocomposites
Kim DS, Lee KM
1961 - 1969 Miniemulsion polymerization of styrene with polymeric costabilizers
Chern CS, Lin CH
1970 - 1976 Effective enhancement of anticorrosive properties of polystyrene by polystyrene-clay nanocomposite materials
Yeh JM, Liou SJ, Lin CG, Chang YP, Yu YH, Cheng CF
1977 - 1983 In situ atomic oxygen erosion study of fluoropolymer films using X-ray photoelectron spectroscopy
Gonzalez RI, Phillips SH, Hoflund GB
1984 - 1992 Raman spectroscopic study of CdS, PVA composite films
Badr YA, El-Kader KMA, Khafagy RM
1993 - 1999 Preparation and evaluation of chitosan-coated polyphosphazene hydrogel beads for drug controlled release
Qiu LY
2000 - 2007 Silica-reinforced dynamically vulcanized ethylene-propylene-diene monomer/polypropylene thermoplastic elastomers: Morphology, rheology, and dynamic mechanical properties
Bazgir S, Katbab AA, Nazockdast H
2008 - 2012 Effect of supercritical carbon dioxide dyeing conditions on the chemical and morphological changes of poly(ethylene terephthalate) fibers
Hou AQ, Xie KL, Dai JJ
2013 - 2016 Preparation of silicon dioxide/polyurethane nanocomposites by a sol-gel process
Zhu Y, Sun DX
2017 - 2022 Fundamental study of the effect of the fiber wall thickness and inner diameter on the structure of polyamide and polypropylene hollow fibers
Petrulis D
2023 - 2029 Supercritical CO2 assisted processing of polystyrene/nylon 1212 blends and CO2-induced epitaxy on nylon 1212
Chang YN, Xu Q, Han BX, Wang YD, Liu MY, Zhao QX
2030 - 2037 Synthesis and characterization of polyacrylamide grafted sodium alginate membranes for pervaporation separation of water plus isovrovanol mixtures
Toti US, Aminabhavi TM
2038 - 2044 Preparation and properties of unsaturated polyester-montmorillonite intercalated hybrid
Zhang YH, Cai QY, Jiang ZJ, Gong KC
2045 - 2053 Synthesis and characterization of polyurethane foam matrices for the support of granular adsorbent materials
Pinto ML, Pires J, Carvalho AP, Bordado JCM, de Carvalho MB
2054 - 2062 Fiber formation and physical properties of chitosan fiber crosslinked by epichlorohydrin in a wet spinning system: The effect of the concentration of the crosslinking agent epichlorohydrin
Lee SH, Park SY, Choi JH