Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.91, No.4 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (83 articles)

2063 - 2071 Immobilization of horseradish peroxidase by entrapment in natural polysaccharide
Shukla SP, Modi K, Ghosh PK, Devi S
2072 - 2078 Hydrogenation of acrylonitrile-butadiene rubber latexes
Zhou SQ, Bai HD, Wang JG
2079 - 2095 Thin film solvent-free photopolymerization of n-butyl acrylate. I. Static film studies
Boodhoo KVK, Dunk WAE, Jassim MS, Jachuck RJ
2096 - 2102 Quantitation of microstructure of novolac resins: Development of improved one- and two-dimensional NMR methodologies
Roy D, Basu PK, Raghunathan P, Eswaran SV
2103 - 2113 Microwave-assisted rapid polycondensation reaction of 4-(4'-acetamidophenyl)-1,2,4-triazolidine-3,5-dione with diisocyanates
Mallakpour S, Rafiee Z
2114 - 2121 Thermoplastic biopolyester natural fiber composites
Shanks RA, Hodzic A, Wong S
2122 - 2127 Synthesis of poly(butylene succinate)/glass fiber composite by irradiation and its biodegradability
The DT, Yoshii F, Nagasawa N, Kume T
2128 - 2134 Heat-treated softwood exposed to weathering
Nuopponen M, Wikberg H, Vuorinen T, Maunu SL, Jamsa S, Viitaniemi P
2135 - 2142 Swelling and drug-release behavior of the poly(AA-co-N-vinyl pyrrolidone)/chitosan interpenetrating polymer network hydrogels
Lee WF, Chiang WH
2143 - 2150 Direct synthesis of poly(D,L-lactic acid) by melt polycondensation and its application in drug delivery
Zhao YM, Wang ZY, Wang J, Mai HZ, Yan B, Yang F
2151 - 2157 Conductive polymer composites: Influence of extrusion conditions on positive temperature coefficient effect of poly(butylene terephthalate)/poly(olefin)-carbon black blends
Feller JF
2158 - 2167 Three-level mass-transfer model for the heterogeneous polymerization of olefins
Kittilsen P, Svendsen HF
2168 - 2175 Determination of average molecular weight between crosslinks and polymer-solvent interaction parameters of poly(acrylamide-g-ethylene diamine tetraacetic acid) polyelectrolyte hydrogels
Caykara T, Inam R
2176 - 2185 Effect of filament temperature on the chemical vapor deposition of fluorocarbon-organosilicon copolymers
Murthy SK, Olsen BD, Gleason KK
2186 - 2194 Poly(dimethylsiloxane) coatings for controlled drug release. II. Mechanism of the crosslinking reaction in emulsion
Gao ZM, Nahrup JS, Mark JE, Sakr A
2195 - 2207 Continuous tubular reactors for latex production: Conventional emulsion and miniemulsion polymerizations
Ouzineb K, Graillat C, McKenna T
2208 - 2215 Characterization of poly(vinyl pyrrolidone-co-isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites
Xu HY, Kuo SW, Huang CF, Chang FC
2216 - 2222 Blends of ethylene-methyl acrylate-acrylic acid terpolymers with ethylene-acrylic acid copolymers: Mechanical and thermomechanical properties
Pongrakananon N, Somrang N, Visitsart W, Supaphol P, Nithitanakul M, Grady BP
2223 - 2233 Hot compaction of woven poly(ethylene terephthalate) multifilaments
Hine PJ, Ward IM
2234 - 2243 Phase-separation phenomena in the polymerization of styrene in the presence of polyethylene wax
Liskova A, Berghmans H
2244 - 2255 Photooxidation and stabilization of photooxidized polyethylene and of its monopolymer blends
La Mantia FP, Dintcheva NT
2256 - 2264 The effect of methods of introducing acrylic emulsions grafted with acetoacetyl groups on the properties of particleboards
Dziurka D, Lecka J
2265 - 2270 Study on nanometer-size styrene-butadiene multiblock copolymer synthesized by reactive extrusion
Gao SS, Ying Z, Anna Z, Xia HN
2271 - 2277 Effects of synthesis conditions on the pervaporation properties of poly[1-(trimethylsilyl)-1-propyne] useful for membrane bioreactors
Volkov VV, Fadeev AG, Khotimsky VS, Litvinova EG, Selinskaya YA, McMillan JD, Kelley SS
2278 - 2287 Density-based phase-separation asymmetric polyethylene-poly(dimethyl siloxane) blend membranes: Preparation and properties
Pandey P, Chauhan RS, Semwal RP, Banerjee S, Jain R
2288 - 2294 Synthesis and characterization of new optically active poly(amide-imide-urethane) thermoplastic elastomers, derived from 4,4'-(hexafluoroisopropylidene)-N,N'-bis(phthaloyl-L-leucine-p-aminobenzoic acid) and PEG-MDI
Mallakpour S, Khoee S
2295 - 2301 Thermal degradation of the polyimide synthesized from 4.4'-(hexafluoroisopropylidene) diphthalic dianhydride and 4,4'-diaminodiphen'ylmethane
Ren L, Fu WW, Luo YF, Lu H, Jia DM, Shen JR, Pang B, Ko TM
2302 - 2312 Electrochemical polymerization of fluoro- and chloro-substituted anilines and copolymers with aniline
Sahin Y, Percin S, Sahin M, Ozkan G
2313 - 2319 Recycling of pharmaceutical waste gelatin for controlled release applications. I. A 2,4-dicholorphenoxy acetic acid based system
Kandil S, Kenawy ER, El-Maghraby A
2320 - 2325 Maleic anhydride grafted polypropylene as a coupling agent for polypropylene composites filled with ink-eliminated waste paper sludge flour
Qiao XY, Zhang Y, Zhang YX
2326 - 2329 Effect of the reaction atmosphere on high-density polyethylene functionalized by ultraviolet irradiation
Wu SS, Xu X
2330 - 2334 Stability of high-bandwidth graded-index polymer optical fiber
Dai XH, He J, Liu ZM, Ai XC, Yang GY, Han BX, Xu J
2335 - 2342 Prevaration and characterization of CdS and CdS/polyacrylonitrile nanocomposites by gamma-irradiation and emulsion polymerization
Choi SH, Choi MS, Lee KP, Kang HD
2343 - 2347 Synthesis and characterization of a terpolymer of limonene, styrene, and methyl methacrylate via a free-radical route
Sharma S, Srivastava AK
2348 - 2357 Properties of crosslinked blends of pellethene and multiblock polyurethane containing poly(ethylene oxide) for biomaterials
Yoo HJ, Kim HD
2358 - 2363 Ultraviolet curing of liquid polysulfide thiourethane acrylate
Quan YW, Dong WZ, Fang JL, Chen QM
2364 - 2375 Phase-transfer-agent-aided polymerization and graft copolymerization of acrylamide
Kaur I, Singh B
2376 - 2382 Monomolecular chain termination in the kinetics of dimethacrylate postpolymerization
Medvedevskikh YG, Kytsya AR, Bazylyak LI, Bratus AM, Turovski AA, Zaikov GE
2383 - 2390 Biodegradation of Bombyx mori silk fibroin fibers and films
Arai T, Freddi G, Innocenti R, Tsukada M
2391 - 2396 Dynamics of lipase catalyzed enzymatic degradation of poly(bisphenol-A carbonate)
Sivalingam G, Madras G
2397 - 2401 Investigation of the influence of CuO filler and carbon fiber on wear and transfer film of nylon composites
Wang JX, Gu MY
2402 - 2406 Correlating the crystallization kinetics of syndiotactic polystyrene
Hieber CA
2407 - 2415 Study on the structure and processibility of the lodinated poly(vinyl alcohol). I. Thermal analyses of lodinated poly(vinyl alcohol) films
Shin EJ, Lee YH, Chi SC
2416 - 2421 Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites
Tang Y, Hu Y, Wang JZ, Zong RW, Gui Z, Chen ZY, Zhuang YL, Fan WC
2422 - 2426 Precipitation of PMMA/PCL blends using supercritical carbon dioxide
Vega-Gonzalez A, Domingo C, Elvira C, Subra P
2427 - 2434 Rheology of poly(propylene)/clay nanocomposites
Gu SY, Ren J, Wang QF
2435 - 2442 Study of sulfonation mechanism of low-density polyethylene films with fuming sulfuric acid
Kaneko M, Kumagai S, Nakamura T, Sato H
2443 - 2453 Crystallization and melting behavior of nano-CaCO3/polypropylene composites modified by acrylic acid
Lin Z, Huang ZZ, Zhang Y, Mai KC, Zeng HM
2454 - 2464 Functionalization of poly(4-vinyl pyridine) grafted cellulose by quaternization reactions and a study on the properties of postquaternized copolymers
Chauhan GS, Singh B, Dhiman SK
2465 - 2481 Thermal properties of wood reacted with a phosphorus pentoxide-amine system
Lee HL, Chen GC, Rowell RM
2482 - 2490 Adsorption behavior of ply(N,N-dimethylacrylamide-co-Na 2-acrylamido-2-methylpropanesulfonate) on sand surface
Sabhapondit A, Borthakur A, Haque I
2491 - 2496 Preparation and structure study of polypropylene/polyamide-6 gradient materials
Wen BY, Li QC, Hou SH, Wu G
2497 - 2501 Complexation studies of some newly synthesized precursors for substituted dibenzo and dibenzodiaza crown ethers
Cakir U, Ugras HI, Temel H, Topal G
2502 - 2512 Conversion of polyester into heat-resistant polyamide by reacting with aromatic diamine compound
Kim Y, Roh HD, Lee HC
2513 - 2522 Cationized nylon as adsorbent for anionic residual dyes
Baouab MHV, Zghida H, Gauthier R, Gauthier N
2523 - 2528 Electrorheological behavior of side-chain polysiloxane containing 3-(4-amidophenyl) sydnone moieties
Hua Y, Wing LC, Szeto YS
2529 - 2535 Dielectric and conductivity studies on cobalt phthalocyanine tetramers
Saravanan S, Mathai CJ, Anantharaman MR, Venkatachalam S, Prabhakaran PV
2536 - 2542 Effect of organophilic montmorillonite on polyurethane/montmorillonite nanocomposites
Han B, Cheng AM, Ji GD, Wu SS, Shen J
2543 - 2547 Structural material from waste plastic
Abdel-Goad MAH
2548 - 2557 Viscoelastic behavior of cytec FM73 adhesive during cure
Hojjati M, Johnston A, Hoa SV, Denault J
2558 - 2575 Notch sensitivity of aliphatic polyketone terpolymers
Zuiderduin WCJ, Huetink J, Gaymans RJ
2576 - 2581 Kinetics of heterogeneous polymerization of vinylidene chloride. I. Mechanism and modeling
Lu Q, Weng ZX, Huang ZM, Tao CY, Pan ZR
2582 - 2587 Kinetics of heterogeneous polymerization of vinylidene chloride. II. Discussion of model
Lu Q, Weng ZX, Huang ZM, Cao XH, Pan ZR
2588 - 2593 Durable and regenerable antimicrobial textiles: Improving efficacy and durability of biocidal functions
Qian L, Sun G
2594 - 2600 A novel method for the preparation of core-shell nanoparticles and hollow polymer nanospheres
Yu FQ, Liu YP, Zhu RX
2601 - 2609 An analysis of the influence of the accelerator/sulfur ratio in the cure reaction and the uniaxial stress-strain behavior of SBR
Marzocca AJ, Goyanes S
2610 - 2623 Control of particle morphology and film structures of carboxylated poly(methyl methacrylate)/Poly (n-butylacrylate) composite latex particles
Kirsch S, Stubbs J, Leuninger J, Pfau A, Sundberg D
2624 - 2628 Preparation and performance testing of sulfonated poly(phenylene oxide) based composite membranes for nanofiltration
Nogami N, Chowdhury G, Matsuura T
2629 - 2641 Characteristics of azo-dye binding sites on wool-fiber keratin
Pielesz A
2642 - 2648 Adsorption and complexation of chitosan wet-end additives in papermaking systems
Li HB, Du YM, Xu YM
2649 - 2652 Preparation and characterization of modified-clay-reinforced and toughened epoxy-resin nanocomposites
Zhang KL, Wang LX, Wang F, Wang GJ, Li ZB
2653 - 2660 Structural control and properties of low-dielectric-constant poly(hydrogen silsesquioxane) precursors and their thin films
Liu WC, Yu YY, Chen WC
2661 - 2668 Fundamental foaming mechanisms governing the volume expansion of extruded polypropylene foams
Naguib HE, Park CB, Reichelt N
2669 - 2675 Microencapsulation of capsaicin by the complex coacervation of gelatin, acacia and tannins
Xing FB, Cheng GX, Yang BX, Ma LR
2676 - 2684 Composition, tensile properties, and dispersion of polypropylene composites reinforced with viscose fibers
Paunikallio T, Suvanto M, Pakkanen TT
2685 - 2689 Volumetric study of aqueous solutions of poly(ethylene glycol) from 283.15 to 313.15 K and at 0.1 MPa
Cruz RDC, Martins RJ, de M Cardoso MJE, Barcia OE
2690 - 2699 Colloidal aggregation of MUF polycondensation resins: Formulation influence and storage stability
Zanetti M, Pizzi A
2700 - 2710 Synthesis and polymerization of the bromoacrylated plant oil triglycerides to rigid, flame-retardant polymers
Eren T, Kusefoglu SH
2711 - 2720 Evolution of peroxide-induced thermomechanical degradation of polypropylene along the extruder
Machado AV, Maia JM, Canevarolo SV, Covas JA
2721 - 2728 Positively charged composite nanofiltration membrane prepared by poly(N,N-dimethylaminoethyl methacrylate)/polysulfone
Du RH, Zhao JS
2729 - 2732 UV spectrophotometric method for polyphenolic tannin analysis
Antoine ML, Simon C, Pizzi A
2733 - 2737 Synthesis of dendronized poly (methacrylates) and their diblock copolymers by atom transfer radical polymerization
Cheng CX, Tang RP, Zhao YL, Xi F
2738 - 2738 Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin (vol 90, pg 3848, 2003)
Bao YZ, Liao JG, Huang ZM, Weng ZX