화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.91, No.1 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (93 articles)

1 - 9 Swelling of crosslinked polyacrylates in isotropic and anisotropic solvents
Bouchaour T, Benmouna F, Coqueret X, Benmouna M, Maschke U
10 - 14 Dialysis membranes from polyethylene films grafted with acrylic acid
El-Awady NI
15 - 21 Synthesis of novel oligo(primary-tertiary alkyl peroxides) via oligocondensation reactions under phase transfer catalysis conditions
Zawadiak J, Danch M
22 - 26 Preparation of novel pyridine-based, thermally stable poly(ether imide)s
Mehdipour-Ataei S, Heidari H
27 - 34 Thermal stability and dynamic mechanical behavior of acrylic resin and acrylic melamine coatings
Chattopadhyay DK, Kumar DBR, Sreedhar B, Raju KVSN
35 - 39 Effect of tacticity of poly(methyl methacrylate) on the miscibility with poly(vinyl acetate)
Hsu WP
40 - 45 Effect of electrical field on dipoles in polymer composites
Svorcik V, Gardasova R, Rybka V, Hnatowicz V, Cervena J, Plesek J
46 - 51 Trehalose-based thermosetting resins. I. Synthesis and thermal properties of trehalose vinylbenzyl ether
Teramoto N, Shibata M
52 - 59 Reinforced poly(ether sulfone) materials by blending with a semiaromatic liquid crystalline copolyester
Garcia M, Eguiazabal JI, Nazabal J
60 - 67 Packaging-related properties of alkyd-coated, wax-coated, and buffered chitosan and whey protein films
Gallstedt M, Hedenqvist MS
68 - 71 Effect of a chain extender on the crystallization behavior of nylon 66
Ding XJ, Rong JH, Xu RW, Yu DS, Yang ZZ
72 - 77 Release of diclofenac through gluteraldehyde crosslinked poly(vinyl alcohol)/poly(acrylic acid) alloy membranes
Sanli O, Asman G
78 - 88 Modeling of creep and shrinkage behavior of polymeric films used in magnetic tapes
Bhushan B, Jayantha-Rao R
89 - 100 The role of preconditioning on morphology development in layered silicate thermoset nanocomposites
Tolle TB, Anderson DP
101 - 109 Synthesis and properties of polystyrene-montmorillonite nanocomposites by suspension polymerization
Hwu JM, Ko TH, Yang WT, Lin JC, Jiang GJ, Xie W, Pan WP
110 - 114 Properties of high-density polyethylene filled with waste crosslinked foam
Tamboli SM, Mhaske ST, Kale DD
115 - 124 Study of compartmentalization in the polymerization of miniemulsions of styrene and butyl methacrylate
Ouzineb K, Graillat C, McKenna TF
125 - 131 True sample temperatures in isothermal differential scanning calorimetry scans and their effect on the overall polymer crystallization kinetics
Martins JA, Pinto JJCC
132 - 139 Phase behavior and mechanical properties of blends of poly(butylene terephthalate) and poly(amino-ether) resin
Granado A, Eguiazabal JI, Nazabal J
140 - 145 Synthesis and characterization of poly(ethylene terephthalate) nanocomposites with organoclay
Ou CF, Ho MT, Lin JR
146 - 156 Concentration dependency of interaction parameter between PVC and plasticizers using inverse gas chromatography
Huang JC, Deanin RD
157 - 166 Influence of electron beam irradiation on properties of fluorine-containing poly(aryl ether ketone)s
Kimura K, Tabuchi Y, Nishichi A, Yamashita Y, Okumura Y, Omote K, Morita Y, Kudo H
167 - 174 Preparation of novel heterogeneous cation-permeable membranes from blends of sulfonated poly(phenylene sulfide) and poly(ether sulfone)
Hu KY, Xu TW, Yang WH, Fu YX
175 - 189 The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites
Chow WS, Ishak ZAM, Ishiaku US, Karger-Kocsis J, Apostolov AA
190 - 195 Synthesis and properties of self-crosslinkable polyurethane-urea with silsesquioxane formation
Zhang T, Xi K, Chen H, Yu XH
196 - 204 Blends of poly(epsilon-caprolactone-b-lactic acid) and poly(lactic acid) for hot-melt applications
Stolt M, Viljanmaa M, Sodergard A, Tormala P
205 - 210 Microhardness studies of PMMA/natural rubber blends
Mina MF, Ania F, Calleja FJB, Asano T
211 - 217 Butadiene polymerization with vanadium-titanium-aluminum catalytic systems
Mullagaliev IR, Kharitonova EY, Urazbaev VN, Monakov YB
218 - 225 Phase structural analyses of polyethylene extrusion coatings on high-density papers. I. Monoclinic crystallinity
Furuheim KM, Axelson DE, Antonsen HW, Helle T
226 - 234 Phase structural analyses of polyethylene extrusion coatings on high-density papers. II. Influence of paper surface properties on the polyethylene morphology
Furuheim KM, Axelson DE, Antonsen HW, Helle T
235 - 241 Phase structural analyses of polyethylene coatings on high-density papers. III. Determination of the crystallite thicknesses by T-1 measurements
Furuheim KM, Axelson DE, Antonsen HW, Helle T
242 - 246 Electrospinning of ethyl-cyanoethyl cellulose/tetrahydrofuran solutions
Zhao SL, Wu XH, Wang LG, Huang Y
247 - 252 Study of motional processes in polymer blends composed of isotactic polypropylene and ethylene-propylene-diene monomer rubber by broad-line H-1-NMR
Olcak D, Onufer J, Mucha U, Raab M, Spevacek J
253 - 259 Phase morphology of PP/COC blends
Slouf M, Kolarik J, Fambri L
260 - 269 Compatibilization of a poly(butylene terephthalate)/poly(ethylene octene) copolymer blends with different amounts of an epoxy resin
Arostegui A, Nazabal J
270 - 273 Studies on the electromagnetic interference shielding effectiveness of metallized PVAc-AgNO3/PET conductive films
Huang CJ, Chang TC
274 - 277 Preparation and degradation of PLA/chitosan composite materials
Li LH, Ding S, Zhou CR
278 - 281 Graft copolymerization of acrylic acid onto methylcellulose by potassium permanganate-p-xylene redox pair
Eromosele CO, Nwokata SP
282 - 287 Graft-modified HCPE with methyl methacrylate by the mechanochemistry reaction. II. Physical-mechanical properties and processability
Zhao JR, Feng Y, Chen XF
288 - 295 Synthesis, characterization, and antibacterial activity of metal-containing polyurethanes
Jayakumar R, Lee YS, Rajkumar M, Nanjundan S
296 - 302 Thermal behavior of pentachlorophenyl methacrylate-acrylonitrile copolymers
Azab MM
303 - 307 Preparation of a porous conducting polymer film by electrochemical synthesis-solvent extraction method
Li L, Yan F, Xue G
308 - 314 Nonisothermal melt crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites
Wang YM, Shen CY, Li HM, Li Q, Chen JB
315 - 320 Effect of addition of oligobetapinene on morphology, thermal and gas permeation properties in blends with HDPE
Mendes LC, Jatoba LFC, Ferreira AF, Garcia MEF
321 - 331 Structural effect of emulsifiers on the emulsion stability of a water/benzene mixture
Saito R, Mitani S, Saito M
332 - 338 Properties of crosslinked casein/waterborne polyurethane composites
Wang NG, Zhang L, Lu YS, Du YM
339 - 342 Impact behavior of unidirectional polyethylene-glass fibers: Resol/vinyl acetate-2-ethylhexylacrylate interpenetrating polymer network systems
Datta C, Basu D, Banerjee A
343 - 346 Copolyester of trimellitic acid, glycerol, and poly(ethylene glycol): Synthesis and characterization
Pramanick D, Pramanick R, Betal G
347 - 353 Water-soluble/dispersible cationic pressure-sensitive adhesives. II. Adhesives from emulsion polymerization
Yan ZG, Luo YW, Deng YL, Schork J
354 - 360 Studies on semi-interpenetrating polymer network based on nitrile rubber and poly(methyl methacrylate)
Samui AB, Dalvi VG, Patri M, Chakraborty BC, Deb PC
361 - 368 New aspects of aging in epoxy networks. I. Thermal aging
Bockenheimer C, Fata D, Possart W
369 - 377 New aspects of aging in epoxy networks. II. Hydrothermal aging
Bockenheimer C, Fata D, Possart W
378 - 386 Reduction and cyclization to form poly(benzimidazole amide imide) copolymers
Wang HH, Wu SP
387 - 395 Methyl methacrylate and acrylamide crosslinked macroporous copolymers
Nikolic L, Skala D, Nikolic V, Stamenkovic J, Babic D, Ilic-Stojanovic S
396 - 403 Synthesis and characterization of poly(1,4-phenylenevinylene) derivatives containing liquid crystalline oxadiazole groups
Sun XB, Li M, Liu D, Zhang P, Tian WJ
404 - 409 Graded-index plastic optical fiber with high mechanical properties enabling easy network installations. I
Ishigure T, Hirai M, Sato M, Koike Y
410 - 416 Graded-index plastic optical fiber with high mechanical properties enabling easy network installations. II
Ishigure T, Hirai M, Sato M, Koike Y
417 - 424 Characterization of structural changes in thermally enhanced Kevlar-29 fiber
Downing JW, Newell JA
425 - 430 Fabrication and optical characterization of poly(2,5-di-n-butoxyphenylene) nanofibril arrays
Yu BZ, Gao Y, Li HL
431 - 438 Crystallization behavior and mechanical properties of polypropylene copolymer by in situ copolymerization with a nucleating agent and/or nano-calcium carbonate
Zhu WP, Zhang GP, Yu JY, Dai G
439 - 444 Synthesis and potential radical copolymerization of new monomers based on diallylguanidine
Zaikov GE, Malkanduev YA, Khashirova SY, Esmurziev AM, Martynenko AI, Sivova LI, Sivov NA
445 - 454 Thermal decomposition kinetics of thermotropic copolyesters made from trans-p-hydroxycinnamic acid and p-hydroxybenzoic acid
Tang W, Li XG, Yan DY
455 - 462 Effect of ethylphosphate on azobenzene-containing thermotropic liquid-crystalline polymers
Kumaresan S, Kannan P
463 - 468 Intraligand cooperation in metal-ion binding by immobilized ligands: The effect of bifunctionality
Alexandratos SD, Smith SD
469 - 478 Newsprint paper waste as a fiber reinforcement in rubber comvosites
Nashar DEE, Abd-El-Messieh SL, Basta AH
479 - 488 Synthesis, characterization, and swelling responses of poly(N-isopropylacrylamide)- and hydroxypropyl cellulose-based environmentally sensitive biphasic hydrogels
Chauhan GS, Lal H, Mahajan S
489 - 493 Gradient of birefringence: A new direction for gradient optics
Nadareishvili L, Gvatua S, Blagidze I, Zaikov G
494 - 500 New polymeric Schiff base and its metal complexes
Kaliyappan T, Rajagopan S, Kannan P
501 - 505 Blends composed of poly(N-isopropylacrylamide) and an ethylene/vinyl alcohol copolymer: Thermal and morphological studies
Mano V, Silva MESRE, Barbani N, Giusti P
506 - 509 Resin-vulcanized NBR: Suitability of rheometric parameters for the calculation of cure kinetic constants - Part II
Sousa AMF, Peres ACC, Nunes RCR, Visconte LLY, Furtado CRG
510 - 515 Enhanced toughening of poly(propylene) with reclaimed-tire rubber
Tantayanon S, Juikham S
516 - 524 Facile synthesis of novel optically active poly(amideimide)s containing N,N'-(pyrornellitoyl)-bis-1-phenylalanine diacid chloride and 5,5-disubstituted hydantoin derivatives under microwave irradiation
Faghihi K, Zamani K, Mirsamie A, Mallakpour S
525 - 531 Nonisothermal crystallization of reprocessed poly(ethylene terephthalate)
Spinace MAS, De Paoli MA
532 - 537 Thermal property of EpOXY/SiO2 hybrid material synthesized by the sol-gel process
Weng WH, Chen H, Tsai SP, Wu JC
538 - 544 Influence of crystallinity in the curing mechanism of PVC plastisols
Lopez J, Balart R, Jimenez A
545 - 555 Synthesis and characterization of graft copolymers of hydroxypropyl cellulose with acrylamide and some comonomers
Chauhan GS, Sharma R, Lal H
556 - 562 Preparation of crosslinked carboxymethylated chitin derivatives by irradiation and their sorption behavior for copper(II) ions
Zhao L, Mitomo H, Yoshii F, Kume T
563 - 569 Preparation and structural characterization of nanocrystalline poly(vinyl chloride)
Xiong CX, Wang T, Liu QH, Dong LJ, Chen J, Liu D
570 - 576 Concentrated emulsion copolymerization of butyl acrylate and vinyl acetate initiated by a redox initiator at lower temperature
Zhang HT, Chen M, Lv R
577 - 588 Influence of filler-rubber interactions on the viscoelastic properties of carbon-black-filled rubber compounds
Leopoldes J, Barres C, Leblanc JL, Georget P
589 - 597 Novel sulfonium salts as thermal and photoinitiators for epoxide and acrylate polymerizations
Takahashi E, Sanda F, Endo T
598 - 608 Characterization of birefringent distribution of high-modulus PET fibers by Senarmont compensation method
Yu WD
609 - 620 Thermal behavior and properties of polystyrene/poly(methyl methacrylate) blends
Chuai CZ, Almdal K, Lyngaae-Jorgensen J
621 - 629 Critical processing temperature in the manufacture of fine-celled plastic/wood-fiber composite foams
Guo G, Rizvi GM, Park CB, Lin WS
630 - 635 Structure-property relation in polyvinyl alcohol/starch composites
Siddaramaiah, Raj B, Somashekar R
636 - 643 Preparation of pH-sensitive poly(vinyl alcohol-g-methacrylic acid) and poly(vinyl alcohol-g-acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior
Park SE, Nho YC, Lim YM, Kim HI
644 - 650 Effect of wood fibers on the rheological properties of i-PP/wood fiber composites
Maiti SN, Subbarao R, Ibrahim MN
651 - 658 Wall effects on flow of polymer/particulate/(carboxylic acid) in dies and rheometers
Ahn S, White JL
659 - 665 Synthesis, characterization, and microsphere formation of galactosylated chitosan
Zhang C, Ping QN, Ding Y, Cheng Y, Shen J
666 - 669 The influence of the diluent system on the porous structure formation of copolymers based on 2-vinylpyridine and divinylbenzene. Diluent system. III. Heptane/methylethylketone
Luz CTL, Coutinho FMB
670 - 677 Short sisal fiber-reinforced tire rubber composites: Dynamic and mechanical properties
Martins MA, Mattoso LHC
678 - 685 Novel device of CO adsorption on degradable cellulose-based strips
Singh M, Yadav S, Ahmed S
686 - 687 Permeability of semicrystalline polymers to toluene/methanol mixture (vol 90, pg 2727, 2003)
Gagnard C, Germain Y, Keraudren P, Barriere B