화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.89, No.5 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (38 articles)

1163 - 1176 Physical properties of aliphatic polycarbonates made from CO2 and epoxides
Thorat SD, Phillips PJ, Semenov V, Gakh A
1177 - 1181 Polymerization of propylene using the high-activity Ziegler-Natta catalyst system SiO2/MgCl2 (ethoxide type)TiCl4/Di-n-butyl phthalate/triethylaluminum/dimethoxy methyl cyclohexyl silane
Zohuri GH, Azimfar F, Jamjah R, Ahmadjo S
1182 - 1185 Inhibition of polyketone oxidation
Kalinina IA, Belov GP, Gumargalieva KZ, Shlyapnikov YA, Zaikov GE
1186 - 1194 Preparation and characterization of poly(methyl methacrylate)-clayv nanocomposites via melt intercalation: The effect of organoclay on the structure and thermal properties
Kumar S, Jog JP, Natarajan U
1195 - 1202 Copolymerization and thermal behavior of methyl methacrylate with N-(phenyl/p-tolyl) itaconimides
Anand V, Choudhary V
1203 - 1210 Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites
Ke TY, Sun XZ
1211 - 1229 Atomic force and scanning electron microscopic studies of effect of crosslinking system on properties of maleated ethylene-propylene-diene monomer rubber composites filled with short melamine fibers
Rajeev RS, Bhowmick AK, De SK, Bandyopadhyay S
1230 - 1241 Dose distributions of high-energy electrons into planar and cylindrical layers of low-density polyethylene, high-density polyethylene, poly(vinyl chloride), and copper for industrial applications
Behjat A, Gheysari D, Mojrek A
1242 - 1249 Analysis of the thermodynamic compatibility of poly(vinyl chloride) and nitrile rubbers from inverse gas chromatography
Huang JC
1250 - 1257 ZnBr2-catalyzed chemical effects in poly(acrylonitrile-co-butadiene)
Vega-Cantu Y, Hauge R, Norman L, Billups WE
1258 - 1265 Fluorocarbon-containing hydrophobically modified poly(acrylic acid) gels: Gel structure and water state
Tian Q, Zhao XA, Tang XZ, Zhang YX
1266 - 1276 Graft copolymers of lignin as hydrophobic agents for plastic (wood-filled) composites
Adcock T, Shah V, Chen MJ, Meister JJ
1277 - 1283 Synthesis and functionalities of poly(N-vinylalkylamide). XIV. Polyvinylamine produced by hydrolysis of poly(N-vinylformamide) and its functionalization
Yamamoto K, Imamura Y, Nagatomo E, Serizawa T, Muraoka Y, Akashi M
1284 - 1290 Morphology of phase separated blends of poly(cyclohexyl methacrylate) with poly(vinyl acetate)
Serrano B, Baselga J, Esteban I, Sese LM, Pierola IF
1291 - 1299 Migration of additives from food grade polyvinyl chloride (PVC) films: Effect of plasticization by polymeric modifiers instead of conventional plasticizers
Audic JL, Reyx D, Brosse JC
1300 - 1304 Electrochemical capacitor composed of doped polyaniline and polymer electrolyte membrane
Ryu KS, Wu XL, Lee YG, Chang SH
1305 - 1310 Reactive compatibilization of the poly(butylene terephtalate)-EVA blend by maleic anhydride. II. Correlations among gel contents, grafting yields, and mechanical properties
Kim SJ, Kang CJ, Chowdhury SR, Cho WJ, Ha CS
1311 - 1318 Closed-loop recycling of postused PP-filled garden chairs using the restabilization technique. III. Influence of artificial weathering
Kartalis CN, Papaspyrides CD, Pfaendner R
1319 - 1321 Potentials in anionic polyelectrolyte hydrogels
Gao F, Reitz FB, Pollack GH
1322 - 1330 Study of poly(acrylamide-co-2-acrylamido-2-methylpropane sulfonic acid) hydrogels made using gamma radiation initiation
Zhang C, Easteal AJ
1331 - 1335 Rheokinetic modeling of HTPB-TDI and HTPB-DOA-TDI systems
Bandgar BM, Sharma KC, Mukundan T, Krishnamurthy VN
1336 - 1340 Increase of catalyst activity by transfer of bulky alkyl groups from zirconocene complexes to methylalumoxane
Denner CE, Alt HG
1341 - 1346 Graft copolymerization of acrylic acid onto xanthum gum using a potassium monopersulfate/Fe2+ redox pair
Pandey PK, Banerjee J, Taunk K, Behari K
1347 - 1350 Synthesis and thermotropic liquid-crystalline behavior of novel main-chain poly(aryl ether ketones)
Hu W, Liu BJ, Wang D, Yang YH, Chen CH, Jiang ZH, Zhang WJ, Wu ZW
1351 - 1355 Influence of hydrophobe content on phase coexistence curves of aqueous two-phase solutions of associative polyacrylamide copolymers and poly(ethylene glycol)
Abu-Sharkh BF, Hamad EZ, Ali SA
1356 - 1361 The influence of various reaction parameters on the performance of (alpha-diimine)nickel(II) catalysts in ethylene oligomerization reactions
Helldorfer M, Alt HG
1362 - 1370 Calorimetric and rheological study of isocyanate-pyrolysis oil blends
Gagnon M, Roy C, Rodrigue D, Riedl B
1371 - 1378 Curing process of powdered phenol-formaldehyde resol resins and the role of water in the curing systems
He GB, Riedl B, Ait-Kadi A
1379 - 1384 Structure and gas separation properties of composite films based on polyaniline
Orlov AV, Kiseleva SG, Karpacheva GP, Teplyakov VV, Syrtsova DA, Starannikova LE, Lebedeva TL
1385 - 1389 Properties of impregnation resin added to multifunctional epoxy at cryogenic temperature
Chen QA, Gao BJ, Chen JL
1390 - 1396 Physical properties of wool fibers modified with isocyanate compounds
Freddi G, Innocenti R, Arai T, Shiozaki H, Tsukada M
1397 - 1404 Modified polyurethane with improvement of acid dye dyeability
Wang HH, Lin LE
1405 - 1411 Preparation and characterization of the complex latex formed through complexation of two polymer latexes with chemically complementary structure
Yang MJ, Dan Y
1412 - 1416 Synthesis and fluorescence in solution of polybenzimidazolylphenylenephthalamides
Fujimura T, Tsuchiya M, Koizumi T, Ishimaru K, Kojima T
1417 - 1422 Effect of the polyurethane crystalline interphase formed at an Al surface on water-vapor absorption
Kim J, Ryba ER, Bai JM
1423 - 1429 Stability and depolymerization of poly(sebacic anhydride) under high moisture environment
Chan CK, Chu IM
1430 - 1441 Synthesis, characterization, and rheological studies of methacrylic acid-ethyl acrylate-diallyl phthalate copolymers
Jassal M, Acharya BN, Bajaj P
1442 - 1452 Acrylic rubber-fluorocarbon rubber miscible blends: Effect of curatives and fillers on cure, mechanical, aging, and swelling properties
Kader MA, Bhowmick AK