화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.65, No.7 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (23 articles)

1237 - 1243 Analysis of Poly(Ethylene-Terephthalate) (Pet) Films by Atomic-Force Microscopy
Gould SA, Schiraldi DA, Occelli ML
1245 - 1255 Mechanical-Properties and Failure Mode of Thermoplastic Elastomers from Natural-Rubber Poly(Methyl Methacrylate) Natural Rubber-G-Poly(Methyl Methacrylate) Blends
Oommen Z, Thomas S
1257 - 1262 Porous Structure and Swelling Properties of Styrene-Divinylbenzene Copolymers for Size-Exclusion Chromatography
Coutinho FM, Neves MA, Dias ML
1263 - 1270 Development of Poly(Vinylidene Fluoride) Hollow-Fiber Membranes for the Treatment of Water/Organic Vapor Mixtures
Chabot S, Roy C, Chowdhury G, Matsuura T
1271 - 1283 Kinetics of Ion-Exchange in Monodisperse Resin
Krongauz VV, Kocher CW
1285 - 1291 Copolymerization of 4-Nitrophenyl Acrylate with Glycidyl Methacrylate - Synthesis, Characterization, and Reactivity Ratios
Thamizharasi S, Gnanasundaram P, Reddy BS
1293 - 1306 Optothermal Properties of Fibers .7. Optical Investigation of Annealed Nylon-6 Fibers
Fouda IM, Eltonsy MM, Metawe FM, Hosny HM, Easawi KH
1307 - 1311 Spectrophotometric Behavior of Polyvinylpyrrolidone in Aqueous-Solutions .2. The Effects of Denaturing Agents
Guner A
1313 - 1318 Photopolymerization Synthesis of Poly(N-Isopropylacrylamide) Hydrogels
Kubota H, Fukuda A
1319 - 1332 Synthesis, Characterization, and Stability of Poly((Alkylene Oxide) Ester) Thermoplastic Elastomers
Mccarthy SJ, Meijs GF, Gunatillake P
1333 - 1347 Role of Reaction-Time in Batch Process Modification of Atactic Polypropylene by Maleic-Anhydride in Melt
Garciamartinez JM, Laguna O, Collar EP
1349 - 1357 Toughening of Bismaleimide Resin by Modification with Poly(Ethylene Phthalate) and Poly(Ethylene Phthalate-Co-Ethylene Isophthalate)
Iijima T, Shiono H, Fukuda W, Tomoi M
1359 - 1362 Flow Profile Induced in Spinneret During Hollow-Fiber Membrane Spinning
Shilton SJ
1363 - 1370 Effects of Transitional Phenomena on the Electric-Field-Induced Strain - Electrostrictive Response of a Segmented Polyurethane Elastomer
Su J, Zhang QM, Kim CH, Ting RY, Capps R
1371 - 1377 Enhancement of the Relative Magnetic-Permeability of Polymeric Composites with Hybrid Particulate Fillers
Fiske TJ, Gokturk H, Kalyon DM
1379 - 1384 Thermal-Behavior of Natural-Rubber and Chlorinated Rubber Blends
Cook JW, Edge S, Packham DE, Thompson AS
1385 - 1393 Polyolefin/Polystyrene in-Situ Compatibilization Using Friedel-Crafts Alkylation
Sun YJ, Baker WE
1395 - 1402 Cell Distributions in and Sound-Absorption Characteristics of Flexible Polyurethane Foams
Adachi H, Hasegawa T, Asano T
1403 - 1413 Dynamic Behavior of a Continuous Autothermal Isobutylene Polymerization Reactor
Nele M, Pinto JC
1415 - 1427 Fiber Structure Formation in Ultra-High-Speed Melt-Spinning of Poly(Ethylene 2,6-Naphthalene Dicarboxylate)
Miyata K, Kikutani T, Okui N
1429 - 1439 High-Strain Hysteresis of Rubber Vulcanizates over a Range of Compositions, Rates, and Temperatures
Kar KK, Bhowmick AK
1441 - 1441 Effect of Filler Type on the Response of Polysiloxane Elastomers to Cyclic Stress at Elevated-Temperatures (Vol 63, Pg 1805, 1997)
Visser SA, Hewitt CE, Fitzgerald JJ, Ferrar WT, Binga TD
1443 - 1443 Stabilization of Filled Polysiloxane Elastomers to Cyclic Stress at Elevated-Temperature Through Use of Zinc-Oxide Fillers (Vol 64, Pg 1499, 1997)
Visser SA, Hewitt CE, Fitzgerald JJ, Ferrar WT, Binga TD