Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.127, No.5 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (107 articles)

3279 - 3292 Polymerization-induced phase separation and resulting thermomechanical properties of thermosetting/reactive nonlinear polymer blends: A review
Liu YH
3293 - 3301 Synergistic effects of hybrid fillers on the development of thermally conductive polyphenylene sulfide composites
Leung SN, Khan MO, Chan E, Naguib HE, Dawson F, Adinkrah V, Lakatos-Hayward L
3302 - 3309 Synthesis and application of 2-acrylamido-2-methyl propane sulfonic acid/acrylamide/N,N-dimethyl acrylamide/maleic anhydride as a fluid loss control additive in oil well cementing
Guo SL, Bu YH
3310 - 3317 Comparison of morphology and mechanical properties of peroxide-cured acrylonitrile butadiene rubber/LDH composites prepared from different organically modified LDHs
Feng JX, Liao ZD, Zhu J, Su SP
3318 - 3324 Novel fabrication of disorderly exfoliated sodium montmorillonite in a styrene-butadiene rubber matrix
Wang QG, Zhong Y, Zhang XH, Song ZH
3325 - 3332 Transmission electron microscopic observations of the multilevel microstructure of crosslinked copolymers with methacrylates and siloxane macromers by a radically polymerizable tuning approach
Yokota M, Ajiro H, Akashi M
3333 - 3339 Modification of polycarbonate by adding poly(L-lactide)
Wang YH, Shi YY, Yang JH, Huang T, Zhang N, Wang Y
3340 - 3348 Thermoresponsive sodium alginate-g-poly(N-isopropylacrylamide) copolymers III. Solution properties
Cheaburu CN, Ciocoiu ON, Staikos G, Vasile C
3349 - 3355 Synthesis, characterization, and corrosion inhibition study of polyaniline-alpha-Fe2O3 nanocomposite
Umare SS, Shambharkar BH
3356 - 3364 Electropolymerization and properties of 3,4-ethylenedioxythiophene backbone polymer with tetrathiafulvalene as pendant
Zhang L, Li MJ, Wang CY, Wang YH, Shen YJ
3365 - 3373 Application of microwave-assisted click chemistry in the preparation of functionalized copolymers for drug conjugation
Hu XL, Yan LS, Xiao HH, Li XY, Jing XB
3374 - 3381 Fatigue and static performances of butterfly joints under hygrothermal exposure conditions
Altan G, Topcu M
3382 - 3387 Synthesis of a graft copolymer from an ozonized polycarbonate and its application as a compatibilizer
Ayoub A, Massardier V, Taha M
3388 - 3394 Microstructure and mechanical properties of a polyethylene/polydimethylsiloxane composite prepared using supercritical carbon dioxide
Zhu R, Hoshi T, Muroga Y, Hagiwara T, Yano S, Sawaguchi T
3395 - 3406 Layer double hydroxides for enhanced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) crystallization
Dagnon KL, Robinson C, Chen HH, Garrett DC, Innocentini-Mei LH, D'Souza NA
3407 - 3417 Deviation from the theoretical predictions in the synthesis of amphiphilic block copolymers in a wide range of compositions based on poly(vinyl chloride) by single electron transfer: Degenerative chain living radical polymerization in suspension medium
Rocha N, Coelho JFJ, Barros B, Cardoso PML, Goncalves PM, Gil MH, Guthrie JT
3418 - 3423 Photopolymerization kinetics and thermal properties of dimethacrylate based on bisphenol-S
Li CG, Cheng J, Jian Y, Chang WK, Nie J
3424 - 3434 Oxidation of styrene over polymer- and nonpolymer-anchored Cu(II) and Mn(II) complex catalysts
Sharma S, Sinha S, Biswas P, Maurya MR, Chand S
3435 - 3440 The effect of wool surface and interior modification on subsequent photostability
Zhang H, Deb-Choudhury S, Plowman J, Dyer J
3441 - 3446 Prediction of mechanical properties of poly(ethylene terephthalate) using infrared spectroscopy and multivariate calibration
Caetano VF, Vinhas GM, Pimentel MF, Simoes SD, de Araujo MCU
3447 - 3455 Properties of organo-clay/natural rubber nanocomposites: Effects of organophilic modifiers
Hrachova J, Komadel P, Jochec-Moskova D, Krajci J, Janigova I, Slouf M, Chodak I
3456 - 3466 Preparation and properties of aluminum nitride-filled epoxy composites: Effect of filler characteristics and composite processing conditions
Zhu BL, Wang J, Ma J, Wu J, Yung KC, Xie CS
3467 - 3473 Properties of particulate resin-luting agents with phosphate and carboxylic functional methacrylates as coupling agents
Habekost LV, Camacho GB, Lima GS, Ogliari FA, Piva E, Moraes RR
3474 - 3484 Effect of water and acid-base reactants on adhesive properties of various plasticized poly(vinyl butyral) sheets
Tupy M, Merinska D, Svoboda P, Kalendova A, Klasek A, Zvonicek J
3485 - 3490 "Pore/bead" membrane for rechargeable lithium ion batteries
Su YZ, Shan F, Li ZM, Wang XL
3491 - 3499 Amidoxime copolymer beads containing Cu/Cu2O microparticles as a biocidal material for water disinfection
Gangadharan D, Dixit D, Popat KM, Anand PS
3500 - 3505 A one-step approach for esterification of zein with methanol
Wheelwright WVK, Easteal AJ, Ray S, Nieuwoudt MK
3506 - 3513 Evaluation of the use of fibrin and microcrystalline chitosan membranes as carriers for transforming growth factor beta-1
Michalska M, Kaplinska K, Mirowski M, Bodek A, Bodek KH
3514 - 3521 Miscibility study of chitosan/polyethylene glycol fumarate blends in dilute solutions
Doulabi AH, Mirzadeh H, Imani M
3522 - 3529 Effect of styrene-butadiene latex on the bond performance of macro synthetic fiber in micro jute/macro synthetic hybrid fiber-reinforced latex-modified cement-based composites
Jung JY, Lee JH, Park CG
3530 - 3536 Composition control through pH and ionic strength during acrylic acid/acrylamide copolymerization
Paril A, Giz A, Catalgil-Giz H
3537 - 3542 Polyvinylidene chloride supported L-prolineamide as recoverable catalyst for asymmetric aldol reaction between ketone and aromatic aldehyde
Zhang X, Zhao WS, Yang LL, Cui YC
3543 - 3549 Epoxidation of modified natural plasticizer obtained from rice fatty acids and application on polyvinylchloride films
Faria-Machado AF, da Silva MA, Vieira MGA, Beppu MM
3550 - 3559 The effect of primary structural parameters of poly(methacrylic acid) xerogels on the kinetics of swelling
Jovanovic J, Adnadjevic B
3560 - 3568 Preparation and characterization of poly(vinyl alcohol)-poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications
Bernal A, Kuritka I, Saha P
3569 - 3577 The influence of forming conditions on the properties of the fibers made of chitin butyryl-acetic copolyester for medical applications
Draczynski Z, Bogun M, Mikolajczyk T, Szparaga G, Krol P
3578 - 3585 Ring opening metathesis copolymerization of norbornene with norbornadiene from solutions with different mole fractions of the comonomers catalyzed by Ru-amine complexes
Sa JLS, Nascimento ESP, Fonseca LR, Lima-Neto BS
3586 - 3594 Rheological properties and foam preparation of biodegradable poly(butylene succinate)
Li G, Qi RR, Lu JQ, Hu XL, Luo Y, Jiang PK
3595 - 3600 Mechanical and thermal properties of graphite nanoplatelets reinforced polyarylene ether nitriles/bisphthalonitrile IPN system
Lei YJ, Zhao R, Yang XL, Liu XB
3601 - 3612 Preparation of anionic ion exchange latex particles via heteroaggregation
Han SJ, Daniels ES, Sudol ED, Dimonie VL, Klein A
3613 - 3621 Increasing the elongation at break of polyhydroxybutyrate biopolymer: Effect of cellulose nanowhiskers on mechanical and thermal properties
Patricio PSDO, Pereira FV, dos Santos MC, de Souza PP, Roa JPB, Orefice RL
3622 - 3632 Synthesis of nanosized ethylene-propylene rubber latex via polyisoprene hydrogenation
Kongsinlark A, Rempel GL, Prasassarakich P
3633 - 3644 Synthesis and characterization of the new cellulose derivative films based on the hydroxyethyl cellulose prepared from esparto "stipa tenacissima" cellulose of Eastern Morocco. II. Esterification with acyl chlorides in a homogeneous medium
El Idrissi A, El Barkany S, Amhamdi H, Maaroufi AK
3645 - 3656 Versatility of a succinimidyl-ester functional alkoxyamine for controlling acrylonitrile copolymerizations
Maric M, Consolante V
3657 - 3662 Surface modification of contact lenses using adsorption of ethylene oxide branched copolymers
Toki I, Komatsu M, Shimizu Y, Hara Y
3663 - 3672 Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N-isopropyl acrylamide by a two-step method
Lee WF, Lu HC
3673 - 3680 Effect of different types of organoclays and compatibilizers on the properties of polystyrene-based nanocomposites
Yeniova CE, Yilmazer U
3681 - 3686 Zinc glycerolate with lanthanum stearate to inhibit the thermal degradation of poly(vinyl chloride)
Jiang PP, Song YY, Dong YM, Yan CR, Liu P
3687 - 3692 Photodegradation of poly(ethyleneoxide)/montmorillonite composite films
Lombardo PC, Poli AL, Neumann MG, Machado DS, Schmitt CC
3693 - 3698 Role of saturated solutions of chiral amino acids in synthesis and phase segregation within optically active polyaniline
Sudha, Devendra K, Mitsumasa I
3699 - 3704 Synthesis and anticorrosion properties of poly(2,3-dimethylaniline) doped with phosphoric acid
Ma L, Huang CQ, Gan MY
3705 - 3711 Microcapsules Prepared from a Polycondensate-Based Cement Dispersant via Layer-by-Layer Self-Assembly on Melamine-Formaldehyde Core Templates
Pavlitschek T, Gretz M, Plank J
3712 - 3724 Full Factorial Design-of-Experiments for Preparation of Crosslinked Dextran Microspheres
Kenari HS, Imani M, Nodehi A
3725 - 3730 Preparation and Properties of NBR Composites Filled with a Novel Black Liquor-Montmorillonite Complex
Cao ZL, Liao ZD, Wang X, Su SP, Feng JX, Zhu J
3731 - 3736 Amphiphilic and Biocompatible Properties of Poly (EA-MAA)
Luo XD, Zhu AP, Dai S
3737 - 3748 Synthesis and Characterization of In Situ Polymerized Poly(methyl methacrylate)-Cerium Molybdate Nanocomposite for Electroanalytical Application
Khan AA, Paquiza L
3749 - 3759 Synthesis, Properties and Self-Assembly of Intelligent Core-Shell Nanoparticles Based on Chitosan with Different Molecular Weight and N-Isopropylacrylamide
Wang YJ, Wang J, Ge L, Liu Q, Jiang LQ, Zhu JB, Zhou JP, Xiong F
3760 - 3767 Pressurized Water Pellets and Supercritical Nitrogen in Injection Molding
Cabrera ED, Mulyana R, Castro JM, Lee LJ, Min Y
3768 - 3777 Gold Deposition on Fe3O4/(co)Poly(N-octadecyl methacrylate) Hybrid Particles to Obtain Nanocomposites with Ternary Intrinsic Features
Yang YZ, Mahdavian AR, Daniels ES, Klein A, El-Aasser MS
3778 - 3789 Photoactive Behavior of Polyacrylonitrile Fibers Based on Silver and Zirconium Co-Doped Titania Nanocomposites: Synthesis, Characterization, and Comparative Study of Solid-Phase Photocatalytic Self-Cleaning
Moafi HF, Shojaie AF, Zanjanchi MA
3790 - 3797 Block Copolymers of Acrylonitrile and Poly(dimethylsiloxane)s
Koken N, Karagoz S, Kizilcan N, Ustamehmetoglu B
3798 - 3813 Synthesis and Thermal Properties of Bismaleimides with Mesogen Aromatic Amide-Ester and Flexible Polymethylenic Group
Fache B, Gallot B, Gelin MP, Milano JC, Pham QT
3814 - 3822 Experimental and Modeling Study of the Solid State Polymerization of Poly(ethylene terephthalate) over a Wide Range of Temperatures and Particle Sizes
Zhang J, Shen XJ, Zhang J, Feng LF, Wang JJ
3823 - 3829 Mechanical and Barrier Properties of Poly(lactic acid) Films Coated by Nanoclay-Ink Composition
Kim HK, Kim SJ, Lee HS, Choi JH, Jeong CM, Sung MH, Park SH, Park HJ
3830 - 3838 Acrylonitrile/Vinyl Acetate Copolymer Nanofibers with Different Vinylacetate Content
Cetiner S, Sen S, Arman B, Sarac AS
3839 - 3847 Similarity and Grouping of Perlite and Zeolite Abrasive Fillers: A Replacement Test
Strzemiecka B, Heberger K, Voelkel A
3848 - 3857 Nanocomposites Based on Aromatic Polyesters and Organically Modified Clay
Engelmann G, Bonatz E, Ganster J
3858 - 3863 Adsorption of Salicylic Acid in Aqueous Solution by a Water-Compatible Hyper-Cross-Linked Resin Functionalized with Amino-Group
Xiao GQ, Li H, Xu MC
3864 - 3868 Efficient Dyeing of Silica Fiber Using Metal-Coordinated Polymeric Dye Rotaxane
Kim DH, Zo HJ, Park JS
3869 - 3876 Preparation of Chitosan-Based Adhesives and Assessment of Their Mechanical Properties
Patel AK, Michaud P, de Baynast H, Grediac M, Mathias JD
3877 - 3884 Thermal and Flammability Studies of Poly(vinyl alcohol) Composites Filled with Sodium Hydroxide
Arora S, Kumar M, Kumar M
3885 - 3890 The Effect of Selective Location of Carbon Nanotubes on Electrical Properties of Thermoplastic Vulcanizates
Zhu YL, Zhang XH, Song ZH, Qi GC, Wang X, Li BH, Wang HS, Qiao JL
3891 - 3897 Analysis of the Dielectric Spectroscopy of an Epoxy-ZnO Nanocomposite Using the Universal Relaxation Law
Yang WH, Yi R, Hui SS, Xu Y, Cao XL
3898 - 3909 Stimuli-Responsive Recognition of BSA-Imprinted Poly Vinyl Acetate Grafted Calcium Alginate Core-Shell Hydrogel Microspheres
Ying XG, Qi LL, Li X, Zhang WY, Cheng GX
3910 - 3915 Preparation and Characterization of Polyacrylamide Nanomicrospheres and Its Profile Control and Flooding Performance
Yao CJ, Lei GL, Li L, Gao XM
3916 - 3922 The formation of asymmetric polystyrene/saponite composite nanoparticles via miniemulsion polymerization
Tong ZH, Deng YL
3923 - 3932 Power consumption in the compacting process of polymer particulate solids in a vane extruder
Qu JP, Zhao XQ, Li JB, Cai SQ
3933 - 3939 Tunable morphology and photoluminescence of poly(styrene-block-4-vinylpyridine)-cadmium sulfide nanocomposites
Dong YM
3940 - 3947 Novel PDMS-based membranes: Sodium chloride and glucose permeability
Naeimi M, Karkhaneh A, Barzin J, Khorasani MT, Ghaffarieh A
3948 - 3953 Preparation and characterization of biodegradable poly(sebacic anhydride) chain extended by glycol as drug carrier
Liang YQ, Xiao L, Zhai YL, Xie CP, Deng LD, Dong AJ
3954 - 3961 Effects of surface modification of self-healing poly(melamine-urea-formaldehyde) microcapsules on the properties of unsaturated polyester composites
Tong XM, Zhang M, Wang MS, Fu Y
3962 - 3969 Mechanical and barrier properties of carbon nanotube reinforced PCL-based composite films: Effect of gamma radiation
Khan RA, Dussault D, Salmieri S, Safrany A, Lacroix M
3970 - 3979 Chemometric study of graft copolymerization of guar-g-(acrylamide-co-diallyl dimethylammonium chloride)
Agarwal V, McLean D, Horne J, Richardson D, Stack K
3980 - 3986 Poly(glycerol-sebacate) bioelastomers-kinetics of step-growth reactions using Fourier Transform (FT)-Raman spectroscopy
Maliger R, Halley PJ, Cooper-White JJ
3987 - 3996 Effect of crosslinker and nanoclay on jute fabric reinforced soy flour green composite
Iman M, Maji TK
3997 - 4005 Investigation on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends by solution casting
Cheng J, Zhang J, Wang XL
4006 - 4014 Mechanochemical devulcanization of ground tire rubber and its application in acoustic absorbent polyurethane foamed composites
Zhang XX, Lu ZX, Tian D, Li H, Lu CH
4015 - 4026 Influence of the structure of the onium iodide salts on the properties of modified montmorillonite
Livi S, Dufour C, Gaumont AC, Levillain J, Pham TN
4027 - 4038 Mechanical properties of surface-treated banana fiber/polylactic acid biocomposites: A comparative study of theoretical and experimental values
Jandas PJ, Mohanty S, Nayak SK
4039 - 4043 Thermomechanical properties and morphology of polyethylene oxide and phenolic resole blends
Ratna D, Kocsis JK
4044 - 4051 Morphological structure and mechanical properties of In situ microfibrillar composites of modified PA66 with PP
Cheng LH, Wang WJ, Wang JW, Cao YX, Li GX, Shen YL
4052 - 4060 Solution properties of a novel ampholytic polyphenylene sulfide
Xiao H, Tao R, Cui W, Zhang S, Li RH
4061 - 4071 Acrylic hydrogels-based biocomposites: Synthesis and characterization
Sandu T, Sarbu A, Constantin F, Vulpe S, Iovu H
4072 - 4078 Preparation and characterization of several types of polyvinyl butyral hollow fiber membranes by thermally induced phase separation
Kitaura T, Fadzlina WN, Ohmukai Y, Maruyama T, Matsuyama H
4079 - 4085 Mechanical properties of epoxy composites with low content of diamond particles
Rakha SA, Khan RR, Khurram AA, Fayyaz A, Zakaullah M, Munir A
4086 - 4092 A novel honey-based nanofibrous scaffold for wound dressing application
Maleki H, Gharehaghaji AA, Dijkstra PJ
4093 - 4101 Crystallization behavior of poly(p-dioxanone)-PU/montmorillonite nanocomposites prepared by chain-extending reaction
Zhou Y, Zhang JJ, Niu Y, Huang CL, Yang KK
4102 - 4109 Grafting modification of electrospun polystyrene fibrous membranes via an entrapped initiator in an acrylic acid aqueous solution
Tao R, Zhu XS, Zuo YT, Fan LJ, Wang B, Xin JT
4110 - 4121 Effect of compatibilizer and fillers on the properties of injection molded lignin-based hybrid green composites
Sahoo S, Misra M, Mohanty AK
4122 - 4128 Comparison study of a chiral stationary phase based on cellulose derivatives prepared by "grafting from" and "grafting to" methods
Yang JH, Choi SH
4129 - 4137 Preparation and characterization of electromagnetic interference shielding polyimide foam
Liu XY, Zhan MS, Wang K
4138 - 4149 Development and evaluation of a novel dosage form of diltiazem HCl using ethylene vinyl acetate copolymer and sodium starch glycolate (in vitro/in vivo study)
Al-Nimry SS, Alkhamis KA, Ibrahim HG, Salem MS
4150 - 4159 Sulfonated polyimide/chitosan composite membrane for vanadium redox flow battery: Membrane preparation, characterization, and single cell performance
Yue MZ, Zhang YP, Wang L
4160 - 4167 Benzodioxoles as alternative coinitiators for radical polymerization in a model-dental adhesive resin
Lima GD, Ogliari FA, Silva MGSE, Munchow EA, Petzhold CL, Piva E
4168 - 4176 The effect of gamma-Irradiation and reactive extrusion on the structure and properties of polycarbonate and starch blends: A work oriented to the recycling of thermoplastic wastes
Vignon A, Ayoub A, Massardier V
4177 - 4185 Preparation and characterization of nanoporous polysulfone membranes with high hydrophilic property using variation in CBT and addition of tetronic-1107 surfactant
Mousavi SM, Saljoughi E, Sheikhi-Kouhsar MR
4186 - 4193 Electroless nickel deposition of a palladium-activated self-assembled monolayer on polyester fabric
Guo RH, Jiang SX, Zheng YD, Lan JW