2485 - 2488 |
Use of near-infrared spectroscopy for online quality analysis of Armos fiber/prepreg tape Jiang B, Huang YD, Liu L, Hu CP |
2489 - 2493 |
Ring-opening metathesis copolymerization of dicyclopentadiene and cyclopentene through reaction injection molding process Yao Z, Zhou LW, Dai BB, Cao K |
2494 - 2501 |
Enhanced conductivity and fluorescence of polyaniline doped with Eu3+, Tb3+, and Y3+ ions Zhang JL, Wang H, Yang SM, Wang SH, Yang SM |
2502 - 2509 |
Fabrication and properties of degradable poly(amino acid)/nano hydroxyapatite bioactive composite Zhao ZT, Shan WP, Zhang YF, Li XD, Ma J, Yan YG |
2510 - 2520 |
Effect of using oxygen, carbon dioxide, and carbon monoxide as active gases in the atmospheric plasma treatment of fiber-reinforced polycyanurate composites Zaldivar RJ, Nokes JP, Patel DN, Morgan BA, Steckel G, Kim HI |
2521 - 2528 |
Surface properties and biocompatibility of cellulose acetates Dobos AM, Stoica I, Olaru N, Olaru L, Ioanid EG, Ioan S |
2529 - 2538 |
Preparation of iminodiacetic acid-type composite chelating material IDAA-PGMA/SiO2 and preliminary studies on adsorption behavior of heavy metal ions and rare earth ions Gao BJ, Jiang GM, An FQ |
2539 - 2548 |
Polymer-supported heterogeneous titanium-based Ziegler-Natta catalyst for ethylene polymerization Kalita A, Kamrupi IR, Pokhrel B, Dolui SK |
2549 - 2555 |
Binding and recognition ability of molecularly imprinted polymer toward p-nitrophenol An FQ, Gao BJ, Feng XQ |
2556 - 2563 |
A novel electrospun TPU/PVdF porous fibrous polymer electrolyte for lithium ion batteries Wu N, Jing B, Cao Q, Wang XY, Kuang H, Wang Q |
2564 - 2576 |
Synthesis and properties of bio-based thermoplastic polyurethane based on poly (L-lactic acid) copolymer polydiol Zeng C, Zhang NW, Ren J |
2577 - 2584 |
Polymer-BaTiO3 composites: Dielectric constant and vapor sensing properties in chemocapacitor applications Manoli K, Oikonomou P, Valamontes E, Raptis I, Sanopoulou M |
2585 - 2594 |
The effect of solvent dielectric properties on the collection of oriented electrospun fibers Sun ZC, Deitzel JM, Knopf J, Chen X, Gillespie JW |
2595 - 2603 |
Synthesis and characterization of photoactive chiral copolymers of (S)-N-(1-phenyl ethyl) methacrylamide and disperse red 1 methacrylate Bag DS, Alam S |
2604 - 2613 |
Novel electromagnetic interference shielding effectiveness in the microwave band of magnetic nitrile butadiene rubber/magnetite nanocomposites Al-Ghamdi AA, Al-Hartomy OA, Al-Salamy F, Al-Ghamdi AA, El-Mossalamy EH, Daiem AMA, El-Tantawy F |
2614 - 2625 |
Estimation of surface properties of grafted layers formed on low- and high-density polyethylene plates by photografting of methacrylic acid and acrylic acid at different monomer concentrations and temperatures Yamada K, Yamagami S, Naohara Y |
2626 - 2635 |
Shellac-polyamidoamine: Design of a new polymeric carrier material for controlled release application Dey RK, Tiwary GS, Patnaik T, Jha U |
2636 - 2645 |
Preparation of amorphous carbon nanofilm by magneto-luminous polymerization Yasuda H |
2646 - 2651 |
Preparation of chitosan-based flocculant for high density waste drilling mud solid-liquid separation Zhu H, Sun HY, Wang FH, Zou J, Fan JT |
2652 - 2658 |
Orthogonal design study on factors affecting the degradation of polylactic acid fibers of melt electrospinning Zhao FW, Liu Y, Yuan HL, Yang WM |
2659 - 2667 |
Depth-gradient and photoinitiator-free photocrosslinking of poly(ethylene oxide) Koo GH, Jang J |
2668 - 2679 |
Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors Tian Z, Gu XP, Feng LF, Corriou JP, Hu GH |
2680 - 2694 |
Influence of a pore-forming agent on swelling, network parameters, and permeability of poly(ethylene glycol)-crosslinked poly(methyl vinyl ether-co-maleic acid) hydrogels: Application in transdermal delivery systems Singh TRR, Garland MJ, Migalska K, Salvador EC, Shaikh R, McCarthy HO, Woolfson AD, Donnelly RF |
2695 - 2700 |
In situ polyaniline film formation using ferric chloride as an oxidant Ayad MM, Amer WA, Whdan M |
2701 - 2710 |
Effect of styrene-co-acrylonitrile on cold crystallization and mechanical properties of poly(ethylene terephthalate) Wellen RMR, Canedo EL, Rabello MS |
2711 - 2715 |
High dielectric constant and superparamagnetic polymer-based nanocomposites induced by percolation effect Wang XM, Li WP, Luo LH, Fang Z, Zhang J, Zhu YJ |
2716 - 2723 |
Microwave preparation and properties of O-crosslinked maleic acyl chitosan adsorbent for Pb2+ and (Cu2+) Ge HC, Chen H, Huang SY |
2724 - 2731 |
Characterization of high melt strength propylene/1-butene copolymer synthesized by in situ heat induction melt reaction An YJ, Xing HP, Wang YH, Tang T |
2732 - 2739 |
Grafting maleic anhydride onto EVA and effect on the physical and rheological properties of PETG/EVA-g-MAH blends Hwang SW, Ryu HC, Kim SW, Park HY, Seo KH |
2740 - 2747 |
A multiscale simulation of polymer processing using parameter-based bridging in melt rheology Masubuchi Y, Uneyama T, Saito K |
2748 - 2754 |
Preparation of superabsorbent based on the graft copolymerization of acrylic acid and acrylamide onto konjac glucomannan and its application in the water retention in soils Tian DT, Li SR, Liu XP, Wang JS, Hu S, Liu CM, Xie HQ |
2755 - 2763 |
Effect of poly(oxyalkylene)amines on structure and properties of epoxide nanocomposites Kelnar I, Rotrekl J, Kapralkova L, Hromadkova J |
2764 - 2770 |
Cooperative effect of molecular orientation and beta-form on toughening injection-molded isotactic polypropylene with beta-nucleating agent Lv RH, Li ZJ, Na B, Zou SF, Pan HY |
2771 - 2778 |
Synthesis of high-molecular weight poly(vinyl alcohol) by low-temperature emulsifier-free emulsion polymerization of vinyl acetate and saponification Wang B, Bao XM, Jiang MJ, Ye GD, Xu JJ |
2779 - 2789 |
Curing and characterization of oxazolidone-isocyanurate-ether networks Flores M, Fernandez-Francos X, Morancho JM, Serra A, Ramis X |
2790 - 2798 |
Synergistic interaction of treatment and blending on the stability of high-density polyethylene Jeyakumar D, Suresh G, Mukesh D |
2799 - 2806 |
Investigation on the interpenetrating polymer networks (ipns) of polyvinyl alcohol and poly(N-vinyl pyrrolidone) hydrogel and its in vitro bioassessment Gong M, Zhang L, Zuo Y, Zou Q, Wang YY, Wang L, Li YB |
2807 - 2813 |
Role of three different carboxylic monomers in acrylate emulsion copolymerization in the presence of reactive emulsifier Lu DP, Xie J, Shen L, Zhao Q, Yuan TT, Guan R |
2814 - 2823 |
Temperature-humidity superposition in diffusion phenomena through polyamidic materials Hatzigrigoriou NB, Vouyiouka SN, Joly C, Dole P, Papaspyrides CD |
2824 - 2838 |
Modeling the characteristics of pigment cluster formed foams in coatings and polymer formulations Sudduth RD |
2839 - 2845 |
Photoinitiated polymerization of bisphenol a epoxy diacrylates with bis[4(2-hydroxy-3-acryloyloxypropoxy)phenyl]sulfide Gil M, Gawdzik B, Podkoscielna B |
2846 - 2853 |
Modifications of kenaf fibers with N-methylol acrylamide for production of kenaf-unsaturated polyester composites Ren X, Qiu R, Li K |
2854 - 2860 |
Cure and thermal stability of poly(amide-amidic acid)-cured tetraglycidyl 4,4'-diaminodiphenylmethane Chen HM, Lu RG, Li P, Wang HY, Huang T, Huang ZY, Li TS |
2861 - 2866 |
Effect of scratch velocity on scratch behavior of injection-molded polypropylene Chivatanasoontorn V, Aoki N, Kotaki M |
2867 - 2873 |
Synthesis of fluorescent poly(1-vinylimidazole-co-(1-pyrene) methyl 2-methyl-2-propenote) and determination of monomer reactivity ratios Yan YH, Lu N, Cui J, Zhang JF |
2874 - 2881 |
Preparation of porous honeycomb monolith from UV-curable monomer/dioxane solution via unidirectional freezing and UV irradiation Okaji R, Taki K, Nagamine S, Ohshima M |
2882 - 2889 |
Thermal and mechanical properties of polypropylene nanocomposite materials reinforced with cellulose nano whiskers Bahar E, Ucar N, Onen A, Wang YJ, Oksuz M, Ayaz O, Ucar M, Demir A |
2890 - 2895 |
Molecular weight effect on theta-gel formation in poly(vinyl alcohol)-poly(ethylene glycol) mixtures Bodugoz-Senturk H, Oral E, Choi J, Macias C, Muratoglu OK |
2896 - 2901 |
Investigation of polyurethane (urea)/modified nano-calcium carbonate hybrid aqueous dispersions and their films Yang DY, Zhang HQ, Qiu FX, Han L |
2902 - 2913 |
Synthesis and characterization of poly(ethylene glycol)-b-poly(epsilon-caprolactone) copolymers with functional side groups on the polyester block Chen WH, Hua MY, Lee RS |
2914 - 2919 |
Structure-property evaluation of trisilanolphenyl POSS (R)/polysulfone composites as a guide to POSS melt blending Milliman HW, Sanchez-Soto M, Arostegui A, Schiraldi DA |
2920 - 2928 |
Hyperbranched polyols from hydroformylated methyl soyate Petrovic ZS, Cvetkovic I, Milic J, Hong DP, Javni I |
2929 - 2935 |
Fabrication and deodorizing efficiency of nanostructured core-sheath TiO2 nanofibers Park S, Kim HR, Bang H, Fujimori K, Kim BS, Kim SH, Kim IS |
2936 - 2945 |
Effect of different rapeseed-oil-based polyols on mechanical properties of flexible polyurethane foams Rojek P, Prociak A |
2946 - 2955 |
(S)-2-(ethyl propionate)-(O-ethyl xanthate)- and (S)-2-(Ethyl isobutyrate)-(O-ethyl xanthate)-mediated RAFT polymerization of vinyl acetate Patel VK, Vishwakarma NK, Mishra AK, Biswas CS, Ray B |
2956 - 2962 |
A novel method to prepare poly(vinyl alcohol) water-soluble fiber with narrowly dissolving temperature range Wang B, Zhang F, Jiang MJ, Ye GD, Xu JJ |
2963 - 2969 |
The correlation between crystal structure and nucleation efficiency of a lithium (I) complex on isotactic polypropylene Shi YQ, Xin Z |
2970 - 2976 |
Investigation on particular morphology of immiscible polyamide 12/polystyrene blends Wu BZ, Yao CG, Xie TX, Yang GS |
2977 - 2985 |
A novel negative dielectric constant material based on phosphoric acid doped poly(benzimidazole) Gordon KL, Kang JH, Park C, Lillehei PT, Harrison JS |
2986 - 2992 |
On the swelling of polychloroprene-MMT nanocomposite films Soriano-Luna M, Nunez-Perez HI, Estrada MR |
2993 - 2999 |
Calcium ion-sensor based on polyindole-camphorsulfonic acid composite Pandey PC, Chauhan DS, Prakash R |
3000 - 3005 |
Infrared spectroscopy evidence for the hydrosilylation of rubbers and hydrogen-containing polysiloxane via heat processing Cui MZ, Liu L, Kim J |
3006 - 3013 |
pH-sensitive drug delivery systems by radical polymerization of gelatin derivatives Altimari I, Spizzirri UG, Iemma F, Curcio M, Puoci F, Picci N |
3014 - 3022 |
Preparation and characterization of double-layered microencapsulated red phosphorus and its flame retardance in poly(lactic acid) Chang SK, Zeng C, Yuan WZ, Ren J |
3023 - 3028 |
Preparative scale isocratic chromatographic purification of a polyethylene mono-alcohol accompanied by high resolution evaluation of molecular weight distribution MacDonald II, Sherrington DC |
3029 - 3037 |
Formation of thermally induced craze and prevention by using infrared radiation annealing method Kim SY, Kim SH, Pak SY, Youn JR |
3038 - 3049 |
Preparation and characterization of chemically modified Jute-Coir hybrid fiber reinforced epoxy novolac composites Saw SK, Sarkhel G, Choudhury A |
3050 - 3057 |
Influence of acrylic fibers geometry on the mechanical performance of fiber-cement composites Pakravan HR, Jamshidi M, Latif M, Pacheco-Torgal F |
3058 - 3067 |
Applying the sol-gel method to the deposition of nanocoats on textiles to improve their abrasion resistance Brzezinski S, Kowalczyk D, Borak B, Jasiorski M, Tracz A |
3068 - 3075 |
Synthesis and characterization of fluorine-containing polyester based on phthalic anhydride and tetrafluoropropyl glycidyl ether Jin YQ, Shentu BQ, Weng ZX |
3076 - 3083 |
Investigation of the stereodefect distribution and conformational behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalysts Kang J, Yang F, Wu T, Li HL, Liu DM, Cao Y, Xiang M |
3084 - 3091 |
Surface modification of cellulose nanofibrils for poly(lactic acid) composite application Qu P, Zhou YT, Zhang XL, Yao SY, Zhang LP |
3092 - 3099 |
Synthesis and characterization of biodegradable poly(butylene succinate)-co-oligo(L-valine) copolyesters via direct melt transesterification Ye SW, Tan LC, Zhang L, Chen YW, Wei JC, Zhou WH |
3100 - 3106 |
Synthesis of superporous hydrogels by a postpolymerization foaming protocol and their water absorbent behavior Gong RY, Kang N, Mu YB, Li JZ, Wan XB |
3107 - 3114 |
A single-mode rheological model for steady flows of polymer melts Yang J, Liang JZ, Wang KJ |
3115 - 3124 |
Synthesis, characterization, and study of antibacterial activity of homopolymers and copolymers of 4-benzyloxyphenylacrylates for pressure-sensitive adhesive application Mageswari S, Subramanian K |
3125 - 3133 |
Fluoro-functionalized PLA polymers as potential water-repellent coating materials for protection of stone Giuntoli G, Rosi L, Frediani M, Sacchi B, Frediani P |
3134 - 3141 |
Electrical conductivity of polymer blends of poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate): N-methyl-2-pyrrolidinone and polyvinyl alcohol Chen CH, Larue JC, Nelson RD, Kulinsky L, Madou MJ |
3142 - 3147 |
Preparation and characterization of novolak phenol formaldehyde resin from liquefied brown-rotted wood Li GY, Hse CY, Qin TF |
3148 - 3158 |
Influence of the morphology on the fire behavior of a polycarbonate/poly(butylene terephthalate) blend Sonnier R, Viretto A, Taguet A, Lopez-Cuesta JM |
3159 - 3166 |
Heredity and difference of multiple-scale microstructures in PAN-based carbon fibers and their precursor fibers Yu MJ, Xu Y, Wang CG, Hu XY, Zhu B, Qiao K, Yuan H |
3167 - 3174 |
Effect of talc on thermal stability and flame retardancy of polycarbonate/PSBPBP composite Zhao XM, Wei P, Qian Y, Yu HZ, Liu JP |
3175 - 3183 |
Study of lysozyme-polymer composite microparticles in supercritical CO2 Chen AZ, Pu XM, Yin GF, Zhao C, Wang SB, Liu YG, Wang GY, Kang YQ |
3184 - 3190 |
Study of structural and thermal properties of electron beam irradiated polymethylmethacrylate/bisphenol-A-polycarbonate blends Magida MM |
3191 - 3199 |
Synthesis and characterization of polybenzimidazole-nanodiamond hybrids via in situ polymerization method Zhang R, Shi ZX, Liu Y, Yin J |
3200 - 3210 |
Influence of poly(ether imide) on the free volume hole size and distributions in poly(ether ether ketone) Ramani R, Alam S |
3211 - 3220 |
The interfacial modification of rice straw fiber reinforced poly(butylene succinate) composites: Effect of aminosilane with different alkoxy groups Zhao Y, Qiu JH, Feng HX, Zhang M |
3221 - 3227 |
Electrospinning of type I collagen and PCL nanofibers using acetic acid Chakrapani VY, Gnanamani A, Giridev VR, Madhusoothanan M, Sekaran G |
3228 - 3238 |
Effect of solvent nature in casting-based carbon nanofiber/poly(methyl-methacrylate) nanocomposites Varela-Rizo H, Rodriguez-Pastor I, Martin-Gullon I |
3239 - 3249 |
Influence of the relative amounts of crystalline and amorphous phases on the mechanical properties of polyamide-6 nanocomposites Gargalaka J, Couto RAA, Constantino VRL, Toma HE, Araki K |
3250 - 3258 |
Characterization of extruded film based on thermoplastic potato flour Zhang YC, Yuan X, Thompson MR, Liu Q |
3259 - 3267 |
Synthesis and characterization of isocyanate-functionalized PVA-based polymers with applications as new additives in lubricant formulations Moreno G, de Paz MV, Valencia C, Franco JM |
3268 - 3274 |
Thermal, magnetic, and optical characteristics of ABS-Fe2O3 nanocomposites Nabiyouni G, Ghanbari D |
3275 - 3281 |
Infrared spectroscopy study of photodegradation of polymer modified asphalt binder Araujo MDAS, Lins VDC, Pasa VMD, Fonseca CG |
3282 - 3289 |
ABA low molar mass triblock copolymers in reverse emulsions: A rheological study Gonzalez JM, Rodrigues JD, Nascimento RSV |
3290 - 3301 |
Physicochemical characterization of lignin fractions sequentially isolated from bamboo (Dendrocalamus brandisii) with hot water and alkaline ethanol solution Shi ZJ, Xiao LP, Jia-Deng, Xu F, Sun RC |
3302 - 3312 |
Electrolyte effects of poly(3-methylthiophene) via PET/ITO and synthesis of 5-(3,6-di(thiophene-2-yl)-9H-carbazole-9-yl) pentanitrile on electrochemical impedance spectroscopy Ates M, Karazehir T, Uludag N |