Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.123, No.5 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (72 articles)

2567 - 2573 Cyclohexene oxide mid-chain functional macromonomer of poly(epsilon-caprolactone): Synthesis, characterization, and photoinitiated cationic homo- and copolymerization
Degirmenci M, Acikses A, Genli N
2574 - 2581 Novel magnetic nanoparticles for the hydrolysis of starch with Bacillus licheniformis alpha-amylase
Uygun DA, Ozturk N, Akgol S, Denizli A
2582 - 2587 Surface modification of polythiophene and poly(3-methyl thiophene) films by graft copolymerization
Liu FJ, Chen YB, Wei YY, Li L, Shang SM
2588 - 2594 Synthesis and characterization of chitosan/cloisite 30B film for controlled release of ofloxacin
Sahoo D, Nayak PL
2595 - 2600 Phase transformation mechanisms and piezoelectric properties of poly(vinylidene fluoride)/montmorillonite composite
Zhang YY, Jiang SL, Yu Y, Xiong G, Zhang QF, Guang GZ
2601 - 2608 Lewis acid mediated polymerization of poly(dimethylsiloxane) polymers: Investigating reaction kinetics using both NMR spectroscopy and cyclic voltammetry
Apedaile A, Liggat J, Parkinson J, Nikiforidis G, Berlouis L, Patel M
2609 - 2615 Synthesis of an acrylate elastomer with UV stabilization and its application in polyoxymethylene
Wu GB, Yang F, Zhang SL, Ren XC
2616 - 2627 Characterization of biodegradable polymers by inverse gas chromatography. III. Blends of amylopectin and poly(L-lactide)
Zhong BH, Al-Saigh ZY
2628 - 2635 Synthesis of cyclohexanone formaldehyde resin-methylmethacrylate block-graft copolymers via ATRP
Canak TC, Kizilcan N, Serhatli IE
2636 - 2642 Functionalization of lignin: Synthesis of lignophenol-graft-poly(2-ethyl-2-oxazoline) and its application to polymer blends with commodity polymers
Nemoto T, Konishi GI, Tojo Y, An YC, Funaoka M
2643 - 2650 Silver nanoparticle deposition on hydrophilic multilayer film surface and its effect on antimicrobial activity
Sanchez-Valdes S, Ramirez-Vargas E, Ortega-Ortiz H, Ramos-deValle LF, Mendez-Nonell J, Mondragon-Chaparro M, Neira-Velazquez G, Yanez-Flores I, Meza-Rojas DE, Lozuno-Ramirez T
2651 - 2661 Electrospun zein fibers using glyoxal as the crosslinking reagent
Selling GW, Woods KK, Biswas A
2662 - 2666 Effect of KOH concentration in the gel polymer electrolyte for direct borohydride fuel cell
Ng PL, Jamaludin A, Alias Y, Basirun WJ, Ahmad ZA, Mohamad AA
2667 - 2675 The physical properties of carbon nanoparticles dispersed into NBR/LLDPE nanocomposites for corrosion protection applications
Mahmoud WE
2676 - 2683 Mechanical and thermal properties of polyphenylene sulfide/multiwalled carbon nanotube composites
Jiang ZY, Hornsby P, McCool R, Murphy A
2684 - 2696 A combined experimental and theoretical study on vibrational and optical properties of copolymer incorporating thienylene-dioctyloxyphenyle-thienylene and bipyridine units
Ayachi S, Ghomrasni S, Alimi K
2697 - 2705 Effect of nucleation mechanism on complex poly(L-lactide) nonisothermal crystallization process, part 2: Crystallization kinetics analysis
Martinelli A, Cali M, D'Ilario L, Francolini I, Piozzi A
2706 - 2714 Novel poly-bridged-naphthalene with blue-light-emitting property via electropolymerization
Zhu G, Xu JK, Yue RR, Lu BY, Hou J
2715 - 2725 Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier
Taib RM, Ghaleb ZA, Ishak ZAM
2726 - 2732 Effect of the introduction of polydimethylsiloxane on the foaming behavior of block-copolymerized polypropylene
Wang MY, Ma J, Chu R, Park CB, Nanqiao Z
2733 - 2742 Stab resisting behavior of polymeric resin reinforced p-aramid fabrics
Kim H, Nam I
2743 - 2752 Improving the thermal and mechanical properties of poly(propylene carbonate) by incorporating functionalized graphite oxide
Bian J, Wei XW, Gong SJ, Zhang H, Guan ZP
2753 - 2761 The water state in crosslinked poly(vinyl alcohol)-collagen hydrogel and its swelling behavior
Lin H, Dan WH, Dan NH
2762 - 2767 Diazotization of anilines and diazo coupling with a coupling component mediated by a polymer-supported sodium nitrite and a polymeric acid
Zarchi MAK, Karimi M
2768 - 2774 Acid-base behavior of an oligomer of 3-amino-1,2,4-triazole
Lamanna ME, de la Horra E, Sanabria J, Jacobo SE, D'Accorso NB
2775 - 2780 Synthesis of a branched poly(phenylene ethylene) with bromomethyl groups as an organosoluble and functional parylene
Kobayashi A, Sumi K, Konishi G
2781 - 2786 Miscibility and crystallization behavior of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/phenolic blends
Yang F, Li ZS, Qiu ZB
2787 - 2799 Grafting of styrene onto polyethylene in near critical media
Martini RE, Brignole EA, Barbosa SE
2800 - 2804 Electrical and optical properties of polymer-Au nanocomposite films synthesized by magnetron cosputtering
Liu FJ, Shang SM, Duan YJ, Li L
2805 - 2811 Curing characteristics and mechanical properties of rattan-powder-filled natural rubber composites as a function of filler loading and silane coupling agent
Ismail H, Othman N, Komethi M
2812 - 2827 Investigation on the effects of fabrication parameters on the structure and properties of surface-modified membranes using response surface methodology
Bakeri G, Ismail AF, Rana D, Matsuura T, Shariaty M
2828 - 2836 Influence of heat treatment on the heat distortion temperature of poly(lactic acid)/bamboo fiber/talc hybrid biocomposites
Shi QF, Mou HY, Li QY, Wang JK, Guo WH
2837 - 2848 Plasticized and unplasticized PLA/organoclay nanocomposites: Short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior
Gumus S, Ozkoc G, Aytac A
2849 - 2858 Polyurethane foams derived from liquefied mountain pine beetle-infested barks
Zhao Y, Yan N, Feng M
2859 - 2866 Fabrication and morphology development of isotactic polypropylene nanofibers from isotactic polypropylene/polylactide blends
Peng L, Yang OY, Ru X
2867 - 2874 Flame-retardant polycarbonate/acrylonitrile-butadiene-styrene based on red phosphorus encapsulated by polysiloxane: Flame retardance, thermal stability, and water resistance
Jian RK, Chen L, Hu Z, Wang YZ
2875 - 2882 Preparation of polydimethylsiloxane-coated alpha-alumina fillers with cold plasma for elastomer thermal interface materials
Liu Y, Zhang LQ, Wang WC, Yu HT, Lu YL
2883 - 2893 Effects of the compatibility of a polyacrylic block copolymer/tackifier blend on the phase structure and tack of a pressure-sensitive adhesive
Nakamura Y, Sakai Y, Imamura K, Ito K, Fujii S, Urahama Y
2894 - 2905 Rapid monitoring of bisphenol-A diglycidyl ether formation through byproduct estimation: A study by Fourier transform infra-red spectroscopy
Sreenadhan J, Guria C
2906 - 2910 Novel composite nanofilm of electropolymerization and self-assembling on AA5052 surface as anticorrosion coating
Wang F, Liu JJ, Li YN, Wang YB
2911 - 2922 Polyindene/organo-montmorillonite conducting nanocomposites. I. Synthesis, characterization, and electrokinetic properties
Guzel S, Unal HI, Erol O, Sari B
2923 - 2932 Photo-cross-linked biodegradable thermo- and pH-responsive hydrogels for controlled drug release
Zhao CW, He P, Xiao CS, Gao XY, Zhuang XL, Chen XS
2933 - 2944 Properties and structural characterization of oxide starch/chitosan/graphene oxide biodegradable nanocomposites
Ma J, Liu CH, Li R, Wang J
2945 - 2951 Improvement of the interfacial adhesion between PBO fibers and PPESK matrices using plasma-induced coating
Zhang XY, Chen P, Kang XT, Chen MX, Wang Q
2952 - 2958 Study of compostable behavior of jute nano fiber reinforced biocopolyester composites in aerobic compost environment
Maiti S, Ray D, Mitra D, Misra M
2959 - 2967 Synthesis, characterization, and properties of new siloxane grafted copolyimides
Ghosh A, Banerjee S, Wang DY, Komber H, Voit B
2968 - 2976 Effect of iron carboxylates on the photodegradability of polypropylene. II. Artificial weathering studies
Rajakumar K, Sarasvathy V, Chelvan AT, Chitra R, Vijayakumar CT
2977 - 2984 Studies of fluorine-containing bismaleimide resins part I: Synthesis and characteristics of model compounds
Wang ZY, Ho JC, Shu WJ
2985 - 2991 Influence of the base and diluent methacrylate monomers on the polymerization stress and its determinants
Froes-Salgado NRG, Boaro LC, Pick B, Pfeifer CS, Francci CE, Meier MM, Braga RR
2992 - 2995 Direct formation of "artificial wool" nanofiber via two-spinneret electrospinning
Li CJ, Wang JN, Zhang BF
2996 - 3006 High-viscosity polylactide prepared by in situ reaction of carboxyl-ended polyester and solid epoxy
Zhang JL, Li G, Su YZ, Qi RR, Ye DD, Yu J, Huang SW
3007 - 3016 Sequential interpenetrating polymer networks of novolac resin and poly(2-ethyl hexyl acrylate)-thermal, mechanical, and morphological study
Goswami S, Maji SK
3017 - 3022 Interface electric field of carbon black loaded electrode and its significant influence on charge injection into polyethylene
Xiao C, Zhang YW, An ZL, Zheng FH, Wei WJ, Xuan HY
3023 - 3027 Rheological properties of concentrated solutions of agarose in ionic liquid
Horinaka J, Yasuda R, Takigawa T
3028 - 3035 Frequency response analysis of nonisothermal film blowing process using transient simulations
Kim HM, Lee JS, Jung HW, Hyun JC
3036 - 3045 Thermal stability and pyrolysis kinetics of lignin-phenol-formaldehyde resins
Perez JM, Fernandez A
3046 - 3053 Recycled-disposable-chopstick-fiber-reinforced polypropylene green composites
Shih YF, Chen PW, Wu CS, Huang CM, Hsieh CF
3054 - 3063 Effects of the glass bead content and the surface treatment on the mechanical properties of polypropylene composites
Liang JZ, Wu CB
3064 - 3071 Preparation, characterization, and improvement of hollow epoxy particle-toughened vinyl ester composites for high-end applications
Foon LL, Bin Abu Bakar A
3072 - 3080 Influence of a crosslinked system on the morphology and properties of TPVs based on PA/NBR
Fagundes ECM, Jacobi MAM
3081 - 3089 Investigations of the tribological properties of carbon fabric reinforced phenolic polymer composites filled with several nanoparticles
Wang QH, Zhang XR, Pei XQ, Wang TM
3090 - 3097 Time-of-flight mobilities for conducting dendrimers composed of p-phenylenevinylene dendron and triphenylamine surface group
Mizusaki M
3098 - 3105 Morphological and physical evolutions of aramid fibers aged in a moderately alkaline environment
Derombise G, van Schoors LV, Bourmaud A, Davies P
3106 - 3116 PE/OMMT nanocomposites prepared by in situ polymerization approach: Effects of OMMT-intercalated catalysts and silicate modifications
Huang YJ, Qin YW, Dong JY, Zhao XT, Hu XT
3117 - 3127 Preparation of acrylic/acrylate copolymeric surfactants by emulsion polymerization used in pesticide oil-in-water emulsions
Shi YL, Zheng T, Shang Q
3128 - 3136 A study on the curing kinetics of epoxycyclohexyl polyhedral oligomeric silsesquioxanes and hydrogenated carboxylated nitrile rubber by dynamic differential scanning calorimetry
Liu Q, Ren WT, Zhang Y, Zhang YX
3137 - 3144 A convenient scheme for synthesizing reduction-sensitive chitosan-based amphiphilic copolymers for drug delivery
Cao MY, Jin HX, Ye WJ, Liu P, Wang LQ, Jiang HL
3145 - 3153 Graft copolymers synthesis by dynamic covalent reorganization of polycaprolactone and poly(ethylene-co-vinyl alcohol)
Touhtouh S, Becquart F, Taha M
3154 - 3163 Thermal, dynamic-mechanical, and dielectric properties of surfactant intercalated graphite oxide filled maleated polypropylene nanocomposites
Wang Y, Tsai HB
3164 - 3172 New organic-inorganic hybrid membranes based on sulfonated polyimide/aminopropyltriethoxysilane doping with sulfonated mesoporous silica for direct methanol fuel cells
Geng L, He Y, Liu D, Lu CL
3173 - 3181 Impact, thermal, and morphological properties of functionalized rubber toughened-poly(ethylene terephthalate) nanocomposites
Lim SR, Chow WS
3182 - 3188 Preparation and characterizaton of poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) membrane by UV radiation for the permeation of 5-fluorouracil
Yang JM, Ho CC