화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.114, No.2 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (84 articles)

671 - 679 Separation of Hematopoietic Stem and Progenitor Cells from Human Peripheral Blood Through Polyurethane Foaming Membranes Modified with Several Amino Acids
Higuchi A, Yang ST, Li PT, Chen H, Ruaan RC, Chen WY, Chang Y, Chang Y, Tsai EM, Ling QD, Wang HC, Hsu ST
680 - 687 Synthesis and Characterization of Copolymers of Alkyl- and Azo-Thiophenes: Chromic Properties and Photoinduced Birefringence
Goncalves VC, Costa LMM, Cardoso MR, Mendonca CR, Balogh DT
688 - 695 Investigation of Pluronic (c) F127-Water Solutions Phase Transitions by DSC and Dielectric Spectroscopy
Barba AA, d'Amore M, Grassi M, Chirico S, Lamberti G, Titomanlio G
696 - 704 Monitoring the Stability of Nanosized Silica Dispersions in Presence of Polycations by a Novel Centrifugal Sedimentation Method
Petzold G, Goltzsche C, Mende M, Schwarz S, Jaeger W
705 - 712 Polymerization of Fluoroacrylate and Guar Gum Copolymer as a New Pretreatment Paste for Ink-Jet Printing of Polyester
Chang SYP, Chao YC
713 - 719 Thermal Degradation Analysis of Polyamide 6 Processed at Different Cycles Using Sequential Pyrolysis
Parres F, Crespo JE, Nadal-Gisbert A
720 - 731 Chemical Modification of Unsaturated Polyesters Influence of Polyester's Structure on Thermal and Viscoelastic Properties of Low Styrene Content Copolymers
Worzakowska M
732 - 741 Terminal Functionalized Hydroxyl-Terminated Polybutadiene: An Energetic Binder for Propellant
Shankar RM, Roy TK, Jana T
742 - 753 Compatibilization of Low-Density Polyethylene/Cassava Starch Blends by Potassium Persulfate and Benzoyl Peroxide
Tanrattanakul V, Panwiriyarat W
754 - 759 Properties and Morphology of Poly(lactic acid)/Soy Protein Isolate Blends
Fang K, Wang BB, Sheng KC, Sun XS
760 - 768 Preparation and Characterization of Polysiloxane-Acrylate Latexes with MPS-PDMS Oligomer as Macromonomer
Yan P, Qiu LY
769 - 774 UV-Grafted Gradient Surface Polyurethane Membrane
Zhao PZ, Hua XY, Wang YS, Zhu JH, Niu F
775 - 783 Development of a Poloxamer Analogs/Bioadhesive Polymers-Based In Situ Gelling Ophthalmic Delivery System for Tiopronin
Jiang TY, Sun CS, Shen X, Wang TY, Wang SL
784 - 793 Organic and Aqueous Compatible Polystyrene-Maleic Anhydride Copolymer Ultra-Fine Fibrous Membranes
Cecile C, Hsieh YL
794 - 799 Nanofiber Organic Semiconductors: The Effects of Nanosize on the Electrical Charge Transport and Optical Properties of Bulk Polyanilines
Yakuphanoglu F, Mehrotra R, Gupta A, Munoz M
800 - 805 Nano-Sized Chalk-Protein Deposits as Filler of Elastomers
Przepiorkowska A, Chronska K, Prochon M
806 - 810 Preparation of Low-Protein Natural Rubber Latex: Effect of Polyethylene Glycol
Abhilash G, Sabharwal S, Dubey A, Paul J, John H, Joseph R
811 - 817 Properties of Alkoxysilane Functionalized Polycaprolactone/Polydimethylsiloxane-Modified Epoxy Resin Composites: Effect of Curing Temperature and Compositions
Liu PG, Song JX, He LH, Liang XQ, Ding HY
818 - 825 Preparation and Characterization of Improved Microspheres Containing Bovine Serum Albumin
Li F, Tian F, Liu CJ, Zhao YL
826 - 833 Properties of Poly(vinyl chloride) and Polyesteramides Blends
Kalouskova R, Markvart L, Kredatusova J, Brozek J
834 - 842 Thermal Decomposition of Natural Fibers: Global Kinetic Modeling with Nonisothermal Thermogravimetric Analysis
Yao F, Wu QL, Zhou DG
843 - 846 Resiliency of Silicone O-Rings
Katzman HA, Ross FD, Valenzuela PR
847 - 852 Effect of Poly(ethylene oxide)- Poly(ethylene glycol) Addition on Actuation Behavior of Cellulose Electroactive Paper
Mahadeva SK, Kim J, Kang KS, Kim HS, Park JM
853 - 863 Effects of Expandable Graphite and Ammonium Polyphosphate on the Flame-Retardant and Mechanical Properties of Rigid Polyurethane Foams
Meng XY, Ye L, Zhang XG, Tang PM, Tang JH, Ji X, Li ZM
864 - 873 High Shear Strain Rate Rheometry of Polymer Melts
Kelly AL, Gough T, Whiteside BR, Coates PD
874 - 882 Synthesis of Processible Doped Polyaniline-Polyacrylic Acid Composites
Gupta B, Prakash R
883 - 891 Preparation of Poly(ester imide) Ultrafine Fibers by Gas-Jet/Electrospinning
Wang B, Yao YY, Peng JR, Lin Y, Liu WL, Luo Y, Xiang RL, Li RX, Wu DC
892 - 900 Synthesis of Thermoreactive Polysiloxanes with Cyclic Fragments in. the Side Chain
Mukbaniani O, Tatrishvili T, Titvinidze G, Patsatsia S
901 - 910 Preparation and Characterization of Isotropic Polyurethane Magnetorheological Elastomer Through In Situ Polymerization
Wu JK, Gong XG, Chen L, Xia HS, Hu ZG
911 - 918 A Kinetic Analysis on Thermal Degradation of Poly(phenylene sulfide ether)
Gu AQ, Yu ZL, Li YB
919 - 927 Influence of the Incorporation of Fine Calcium Carbonate Particles on the Impact Strength of Polypropylene/Polystyrene-block-Poly(ethylene butene)-block-Polystyrene Blends
Hikasa S, Nagata K, Miyahara K, Izumi T, Suda T, Toyohara A, Kato A, Nakamura Y
928 - 934 Synthesis and Characterization of Conducting Polyaniline Prepared by Laccase-Catalyzed Method in Sodium Dodecylbenzenesulfonate Micellar Solutions
Streltsov AV, Morozova OV, Arkharova NA, Klechkovskaya VV, Staroverova IN, Shumakovich GP, Yaropolov AI
935 - 939 Strain Effect on Recovery Behaviors from Circular Deformation of Natural Rubber Vulcanizate
Choi SS, Han DH
940 - 947 Effect of Surface Esterification with Octenyl Succinic Anhydride on Hydrophilicity of Corn Starch Films
Zhou J, Ren LL, Tong J, Ma YH
948 - 955 Adsorption of Cr(VI) ions onto Poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole)
Kara A
956 - 961 A Simple Method for the Preparation of Stable Chitooligomers
Zeng LT, Qin CQ, Li W, Wang W
962 - 970 New Generation Polymeric Nanospheres for Catalase Immobilization
Akgol S, Ozturk N, Denizli A
971 - 977 Synthesis and Characterization of a Silicone Resin with Silphenylene Units in Si-O-Si Backbones
Jia MQ, Wu CB, Li W, Gao DH
978 - 992 Effects of Two Different Maleic Anhydride-Modified Adhesion Promoters (PP-g-MA) on the Structure and Mechanical Properties of Nanofilled Polyolefins
Etelaaho P, Nevalainen K, Suihkonen R, Vuorinen J, Jarvela P
993 - 1001 Structural and Mechanical Behavior of Layered Zirconium Phosphonate as a Distributed Phase in Polycaprolactone
Furman BR, Wellinghoff ST, Laine RM, Chan KS, Nicolella DP, Rawls HR
1002 - 1010 Positive Temperature Coefficient and Time-Dependent Resistivity of Carbon Nanotubes (CNTs)/Ultrahigh Molecular Weight Polyethylene (UHMWPE) Composite
Gao JF, Yan DX, Huang HD, Dai K, Li ZM
1011 - 1017 Hydrolytic Stability of Cured Urea-Formaldehyde Resins Modified by Additives
Abdullah ZA, Park BD
1018 - 1024 Elongational Behavior of Epoxy During Curing
Takiguchi O, Sugimoto M, Taniguchi T, Koyama K
1025 - 1032 The Effects of Soft-Segment Molecular Weight and Organic Modifier on Properties of Organic-Modified MMT-PU Nanocomposites
Wang CH, Shieh YT, Nutt S
1033 - 1039 High-Performance Bio-Based Thermosetting Resins Composed of Dehydrated Castor Oil and Bismaleimide
Hirayama KI, Irie T, Teramoto N, Shibata M
1040 - 1047 Homopolymerization Effects in Polymer Layered Silicate Nanocomposites Based Upon Epoxy Resin: Implications for Exfoliation
Pustkova P, Hutchinson JM, Roman F, Montserrat S
1048 - 1054 A Series of 0-3 Composites of Lead Zirconate Titanate and Ferroelectric Nylon77: Preparation and Electrical Properties
Petchsuk A, Supmak W, Thanaboonsombut A
1055 - 1063 A New Method to Determine Monomer Concentration in the Polymer Particles of Emulsion Polymerization Systems by Dynamic Light Scattering
Abdollahi M, Hemmati M
1064 - 1069 Study on Macromolecular Lanthanide Complexes (V): Synthesis, Characterization, and Fluorescence Properties of Lanthanide Complexes with the Copolymers of Styrene and Acrylic Acid
Liang X, Yang Y, Jia XQ, Niu LE, Qi XH
1070 - 1079 Preparation and Properties of Waterborne Interpenetrating Polymer Networks Composed of Polyurethaneurea and Graft Vinyl Ester Resin
Su T, Hu CP
1080 - 1085 Polyesters Based on Two Silarylene or Germarylene Moieties: Synthesis Under Phase-Transfer Conditions
Tagle LH, Terraza CA, Leiva A, Alvarez P
1086 - 1093 Synthesis and Characteristics of a Silicon-Containing Polymer, Manufacture of an Electrolyte Membrane from the Polymer and Poly(vinylidene fluoride-co-hexafluoropropene), and Property Testing of the Membrane
Ye L, Ju L, Wu C, Feng T, Mo W, Wu F, Bai Y, Feng ZG
1094 - 1104 Copolymerization of alpha-Cyanovinyl Acetate with Acrylonitrile and Methacrylonitrile: Synthesis, Characterization, and Study of their Dielectric Behavior
Arous M, Kallel A, Kaddami H, Lahcini M, Belfkira A, Raihane M
1105 - 1117 Poly(ethylene glycol-co-propylene glycol) as a Macromolecular Plasticizing Agent for Polylactide: Thermomechanical Properties and Aging
Jia ZY, Tan JJ, Han CY, Yang YN, Dong LS
1118 - 1125 Improvement of the Properties of Ground Tire Rubber (GTR)-Filled Nitrile Rubber Vulcanizates Through Plasma Surface Modification of GTR Powder
Zhang XX, Zhu XQ, Liang M, Lu CH
1126 - 1132 Optimization of Poly(ethylene terephthalate) Bottles Via Numerical Modeling: A Statistical Design of Experiment Approach
Demirel B, Daver F
1133 - 1140 Nonisothermal Crystallization and Melting Behavior of Poly(epsilon-caprolactone)-b-Poly(ethylene glycol)-b-Poly(epsilon-caprolactone) by DSC Analysis
Wei ZY, Yu FY, Chen GY, Qu C, Wang P, Zhang WX, Liang JC, Qi M, Liu L
1141 - 1149 Products of Reaction Between N,N'-Bis(2-hydroxyethyl)urea and Ethylene Carbonate and their Application to Obtain Polyurethane Foams
Zarzyka-Niemiec I
1150 - 1159 Removal of Basic Dyes from Aqueous Solutions by Crosslinked-Acrylic Acid/Acrylamidopropane Sulfonic Acid Hydrogels
Akkaya MC, Emik S, Guclu G, Iyim TB, Ozgumus S
1160 - 1168 Wood-Thermoplastic Composites from Wood Flour and High-Density Polyethylene
Xiong C, Qi RR, Wang YL
1169 - 1175 The Properties of Reactive Hot Melt Polyurethane Adhesives Modified with Novel Thermoplastic Polyurethanes
Kim TK, Kim BK, Kim YS, Cho YL, Lee SY, Cho YB, Kim JH, Jeong HM
1176 - 1186 Microstructure and Physical Properties of Open-Cell Polyolefin Foams
Rodriguez-Perez MA, Alvarez-Lainez M, de Saja JA
1187 - 1194 Recycled Poly(ethylene terephthalate)/Linear Low-Density Polyethylene Blends Through Physical Processing
Zhang Y, Zhang HS, Yu YB, Guo WH, Wu CF
1195 - 1201 Structure and Mechanical Properties of a Talc-Filled Polypropylene/Ethylene-Propylene-Diene Composite After Reprocessing in the Melt State
Sarrionandia M, Lopez-Arraiza A, Aurrekoetxea J, Arostegui A
1202 - 1207 Thermal and Spectroscopic Studies of Poly(N-vinyl pyrrolidone)/Poly(vinyl alcohol) Blend Films
Abou-Taleb MH
1208 - 1212 Synthesis and Properties of a New Type of Unsaturated Poly(ester amide)
Ai YP, Jiang F, Xie SK, Yi RX
1213 - 1219 Preparation of Polyvinylidene Fluoride Membrane Via a Thermally Induced Phase Separation Using a Mixed Diluent
Lu XL, Li XF
1220 - 1225 Preparation and Characterization of Chitosan/PEG/Gelatin Composites for Tissue Engineering
Hong H, Liu CS, Wu WJ
1226 - 1234 Polyimides Derived from 1,4-Bis [3-oxy-(N-aminophthalimide)] Benzene
Li TH, Yan JL, Yang HL, Li DF, Wang Z, Ding MX
1235 - 1240 Sodium Alginate/Na+-Rectorite Composite Films: Preparation, Characterization, and Properties
Yang LL, Liang GZ, Zhang ZP, He SB, Wang JH
1241 - 1249 Synthesis of Functionalized Liquid Rubbers from Polylsoprene
Dubkov KA, Semikolenov SV, Ivanov DP, Babushkin DE, Matsko MA, Panov GI
1250 - 1255 Preparation of Zr4+ Affinity Column by Atom Transfer Radical Polymerization for Phosphoprotein Isolation
Park JH, Bae IA, Choi SH
1256 - 1263 Glass Fiber-Reinforced Composite Based on Benzoxazine Resin
Kimura H, Matsumoto A, Ohtsuka K
1264 - 1269 Surface Properties of Poly(ethylene oxide)-Based Segmented Block Copolymers with Monodisperse Hard Segments
Husken D, Feijen J, Gaymans RJ
1270 - 1277 Refolding of Lysozyme In Vitro Assisted by Colloidal Thermosensitive Poly(N-isopropylacrylamide) Brushes Grafted onto the Surface of Uniform Polystyrene Cores1
Ge X, Guan YX, Chen J, Yao Z, Cao K, Yao SJ
1278 - 1286 Interactions Between Cationic Conjugated Polyelectrolyte and DNA and a Label-Free Method for DNA Detection Based on Conjugated Polyelectrolyte Complexes
Song H, Sun B, Gu KJ, Yang Y, Zhang Y, Shen QD
1287 - 1294 Effect of Orotic Acid as a Nucleating Agent on the Crystallization of Bacterial Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Copolymers
Jacquel N, Tajima K, Nakamura N, Miyagawa T, Pan PJ, Inoue Y
1295 - 1302 Characterization and Comparison of Acetosolv and Milox Lignin Isolated from Crofton Weed Stem
Zhao XB, Dai LM, Liu DH
1303 - 1311 Crystallization Behavior and UV-Protection Property of PET-ZnO Nanocomposites Prepared by In Situ Polymerization
He JQ, Shao W, Zhang L, Deng C, Li CZ
1312 - 1319 Polymer Crystallization and Precipitation-Induced Wrapping of Carbon Nanofibers with PBT
Mago G, Kalyon DM, Fisher FT
1320 - 1328 Effect of Dynamic Shear on the Microcellular Foaming of Polypropylene/High-Density Polyethylene Blends
Zhang P, Wang XJ, Yang Y, Zhou NQ
1329 - 1338 Preparation and Properties of Flame Retardant Poly(urethane-imide)s Containing Phosphine Oxide Moiety
Ozarslan O, Bayazit MK, Catiker E
1339 - 1347 Synthetic Tannins Structure by MALDI-TOF Mass Spectroscopy
Giovando S, Pizzi A, Pasch H, Rode K
1348 - 1355 Improving the Performance of Urea-Formaldehyde Wood Adhesive System Using Dendritic Poly(amidoamine)s and their Corresponding Half Generations
Essawy HA, Moustafa AAB, Elsayed NH