Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.113, No.6 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (81 articles)

3427 - 3435 Novel Aluminum Phosphate/Cyanate Ester Composites: Thermodegradation Behaviors and Kinetic Analyses
Sun ZQ, Gu AJ, Liang GZ, Dai SK, Yuan L
3436 - 3441 Influence of High Temperature and Pressure Ammonia Solution Treatment on Interfacial Behavior of Carbon Fiber/Epoxy Resin Composites
Meng LH, Chen ZW, Song XL, Liang YX, Huang YD, Jiang ZX
3442 - 3449 Swelling Properties of CMC-g-Poly (AAm-co-AMPS) Superabsorbent Hydrogel
Pourjavadi A, Ghasemzadeh H, Mojahedi F
3450 - 3459 Modification of Poly(Vinyl Chloride) by IPN Formation with Poly(Ethyl Acrylate)
Chakrabarti R, Chakraborty D
3460 - 3469 Thermo-Responsive Injectable Hydrogel System Based on Poly(N-isopropylacrylamide-co-vinylphosphonic acid). I. Biomineralization and Protein Delivery
Kim SY, Lee SC
3470 - 3476 Chemically Modified Sugarcane Bagasse as an Improving Agent for the Properties of Styrene-Butadiene Rubber
Abdelwahab NA, Helaly FM
3477 - 3483 The Characteristics of Carbon Nanotube-Reinforced Poly(phenylene sulfide) Nanocomposites
Yu SZ, Wong WM, Hu X, Juay YK
3484 - 3491 Aminofunctionalization Effect on the Microtribological Behavior of Carbon Nanotube/Bismaleimide Nanocomposites
Liu LN, Fang ZP, Gu AJ, Guo ZH
3492 - 3497 The Effects of Steaming of Beech (Fagus orientalis L.) and Sapele (Entandrophragma cylindricum) Woods on the Adhesion Strength of Varnish
Kilic M
3498 - 3503 Study on the Optical Properties of Sulfur-Containing Poly(methyl methacrylate)-Inorganic Hybrid
Liu SJ, Tian LY, Zheng Z, Wang XL
3504 - 3509 Synthesis of PEG-Functionalized Poly(diphenylacetylene)s and Their Gas Permeation Properties
Sakaguchi T, Kameoka K, Hashimoto T
3510 - 3519 Micromorphology of Macromolecular Superabsorbent Polymer and its Fractal Characteristics
Li YK, Xu TW, Ouyang ZY, Lin XC, Liu HL, Hao ZY, Yang PL
3520 - 3532 Synthesis and Characterization of Copolymers of Poly(ethylene terephthalate) and Cyclohexane Dimethanol in a Semibatch Reactor (Including the Process Model)
Sepehri S, Rafizadeh M, Afshar-Taromi F
3533 - 3543 Synergistic Effect of Halide Ions and Polyethylene Glycol on the Corrosion Inhibition of Aluminium in Alkaline Medium
Umoren SA, Ebenso EE, Ogbobe O
3544 - 3549 Membranes of Cellulose Triacetate Produced from Sugarcane Bagasse Cellulose as Alternative Matrices for Doxycycline Incorporation
Rodrigues G, Toledo LC, Da Silva LG, De Assuncao RMN, Meireles CD, Cerqueira DA, Ruggiero R
3550 - 3556 A Moisture Absorption and Adhesion Study of the Process of Blending Film Using p-Alkylphenol-Resorcinol-Formaldehyde and Rubber Latex
Shen MX, Zhang JS, Chen QM
3557 - 3563 Laboratory Investigation of the Properties of Asphalt Modified with Epoxy Resin
Yu JY, Cong PL, Wu SP
3564 - 3576 Self-Reinforcing Isotactic Polypropylene Prepared Using Crystallizable Solvents
Yoon J, Mccarthy TJ, Lesser AJ
3577 - 3584 Polyethylene/Aluminum Nanocomposites: Improvement of Dielectric Strength by Nanoparticle Surface Modification
Huang XY, Ma ZS, Wang YQ, Jiang PK, Yin Y, Li Z
3585 - 3589 Study on Partially Oxidized Sodium Alginate with Potassium Permanganate as the Oxidant
Lu LB, Zhang P, Cao Y, Lin Q, Pang SJ, Wang HM
3590 - 3595 Structure and Properties of Closed-Cell Foam Prepared from Irradiation Crosslinked Silicone Rubber
Liu PB, Liu DL, Zou HW, Fan P, Xu W
3596 - 3604 Polymers Based on N,N-Diglycidylaniline. I. Investigations of the Curing Kinetics by Dynamic Differential Scanning Calorimetry Measurements
Janeczek H, Siwy M, Schab-Balcerzak E
3605 - 3611 Alkaline-Developable, Chemically Amplified, Negative-Type Photosensitive Polyimide Based on Polyhydroxyimide, a Crosslinker, and a Photoacid Generator
Saito Y, Mizoguchi K, Higashihara T, Ueda M
3612 - 3618 Modification of Ramie Fiber with an Amine-Containing Polymer via Atom Transfer Radical Polymerization
Liu ZT, Sun CA, Liu ZW, Lu J
3619 - 3629 Humic Acid/Polypyrrole on a Paraffin-Impregnated Graphite Electrode and Its Use in Arsenic Extraction
Antilen M, Armijo F
3630 - 3637 Morphology, Mechanical Properties, and Thermal Stability of Poly(L-lactic acid)/Poly(butylene succinate-co-adipate)/Silicon Dioxide Composites
Wang RY, Wang SF, Zhang Y
3638 - 3645 Adsorption of Hg2+ on a Novel Chelating Fiber Prepared by Preirradiation Grafting and Amination
Yang Y, Ma NF, Zhang QK, Chen SX
3646 - 3655 Alkali Treatments of Lyocell in Continuous Processes. I. Effects of Temperature and Alkali Concentration on the Treatments of Plain Woven Fabrics
Siroky J, Manian AP, Siroka B, Abu-Rous M, Schlangen J, Blackburn RS, Bechtold T
3656 - 3660 Bottleneck for Reactive Mola Mass in the Polymerization of Propylene Oxide Initiated with Potassium t-Butoxide
Yang PF, Zhu XW, Yu YH, Xia YM, Li TD
3661 - 3670 Mechanical Properties of Styrene-Butadiene-Styrene Block Copolymer Composites Filled with Calcium Carbonate Treated by Liquid Polybutadienes
Song XF, Yoshino H, Shibata H, Nagatani A, Ueda Y
3671 - 3675 Synthesis of Polyimide Microparticles by Dispersion Polymerization
Ni XW, Shen H, Chen L, Wu G, Lu R, Miyakoshi T
3676 - 3686 Effects of Structural Variables on AUL and Rheological Behavior of SAP Gels
Ramazani-Harandi MJ, Zohuriaan-Mehr MJ, Yousefi AA, Ershad-Langroudi A, Kabiri K
3687 - 3692 Influence of Absorbed Moisture on Antifelting Property of Wool Treated with Atmospheric Pressure Plasma
Xu HL, Peng SJ, Wang CX, Yao L, Sun J, Ji F, Qiu YP
3693 - 3701 Cure Kinetics and Catalyzed Effect of Hydroxyl Group of LC Diglycidyl Ether of Bisphenol-S with Aromatic Diamines
Huo L, Gao JG, Zhang XN
3702 - 3709 Xanthate-Mediated Polymerization of Styrene on Hyperbranched Polyethylenimine: Synthesis, Characterization, and Guest-Encapsulating Property
Wan DC, Yang ZL, Pu HT, Zhao JX, Yang GJ
3710 - 3715 Development of a Biodegradable Rice Straw-g-poly(methylmethacrylate)/Sodium Silicate Composite Flame Retardant
Samal R, Sahoo PK
3716 - 3724 Formation of Highly Oriented Biodegradable Polybutylene Succinate Adipate Nanocomposites: Effects of Cation Structures on Morphology,, Free Volume, and Properties
Dean KM, Pas SJ, Yu L, Ammala A, Hill AJ, Wu DY
3725 - 3731 Method for Preparing Polyaluminocarbosilane
He GM, Chen JX, Chen LF, Xia HP, Zhang LT
3732 - 3741 Blending of Low-Density Polyethylene with Vanillin for Improved Barrier and aroma-releasing Properties in Food Packaging
Jagadish RS, Raj B, Asha MR
3742 - 3749 Factorial Experimental Design Approach in Semicontinuous Emulsion Polymerization of Methyl Methacrylate to Study the Effect of Process Variables
Mishra S, Singh J, Choudhary V
3750 - 3756 Influence of Varying Fiber Lengths on Mechanical, Thermal, and Morphological Properties of MA-g-PP Compatibilized and Chemically Modified Short Pineapple Leaf Fiber Reinforced Polypropylene Composites
Chattopadhyay SK, Khandal RK, Uppaluri R, Ghoshal AK
3757 - 3765 Study on the Synthesis, Characterization, and Kinetic of Bulk Polymerization of Disproportionated Rosin (beta-Acryloxyl Ethyl) Ester
Wang JF, Lin MT, Wang CP, Chu FX
3766 - 3773 Effect of Ferrocene Moieties on the Copper-Based Atom Transfer Radical Polymerization of Methyl Methacrylate
Sunsin A, Wisutsri N, Suriyarak S, Teanchai R, Jindabot S, Chaicharoenwimolkul L, Somsook E
3774 - 3781 Studies on the Possibility of Recycling Microencapsulated Disperse Dye-Bath Effluents
Ji JL, Yang XJ, Lu LD, Wang X
3782 - 3790 Highly Thermally Stable Novolac Derivatives and Their Properties in Epoxy Composites
Wu HH, Chu PP
3791 - 3798 Fracture Behaviors of Metallocene Catalyzed Polyethylene Elastomer Via Peroxide Crosslinking
Lai SM, Liu JL, Hu SH, Huang CH, Wang SJ, Chien SC
3799 - 3808 Extraction, Identification and Sorption Studies of Dyes from Madder on Wool
Farizadeh K, Montazer M, Yazdanshenas ME, Rashidi A, Malek RMA
3809 - 3814 Structure and Properties of Polypropylene-Wrapped Carbon Nanotubes Composite
Li WH, Chen XH, Yang Z, Xu LS
3815 - 3822 Reactive Mold Filling in Resin Transfer Molding Processes with Edge Effects
Ding YY, Jia YX, Yang JY, Sun S, Shi TF, An LJ
3823 - 3830 Thermomechanical Characteristics of Benzoxazine-Urethane Copolymers and Their Carbon Fiber-Reinforced Composites
Rimdusit S, Liengvachiranon C, Tiptipakorn S, Jubsilp C
3831 - 3839 Injectable and Thermosensitive Poly(organophosphazene) Hydrogels for a 5-Fluorouracil Delivery
Lee SM, Chun CJ, Heo JY, Song SC
3840 - 3846 Concentration Profile of Glass Fiber Bundles in Epoxy-Based Gradient Composites During Centrifugation
Hashmi SAR, Dwivedi UK, Chand N
3847 - 3859 Polymer Structure of Commercial Hydrolyzable Tannins by Matrix-Assisted Laser Desorption/Ionization-Time-of-Flight Mass Spectrometry
Pizzi A, Pasch H, Rode K, Giovando S
3860 - 3865 Intumescent Polylactide: A Nonflammable Material
Fontaine G, Bourbigot S
3866 - 3871 Rheological Behavior of Alginate Solutions for Biomanufacturing
Rezende RA, Bartolo PJ, Mendes A, Maciel R
3872 - 3882 Free-Radical Retrograde-Precipitation Copolymerization of Vinyl Acetate and Acrylic Acid
Caneba GT, Xu ZY, Dar YL
3883 - 3890 Phase Morphology and Clay Distribution of Poly(trimethylene terephthalate)/Polypropylene/Montmorillonite Nanocomposites
Xue ML, Li P
3891 - 3895 Surface Modification of PET Fibers with the Use of beta-Cyclodextrin
Voncina B, Vivod V, Chen WT
3896 - 3900 The Effect of Heat History on Thermal Degradation of Elastomers Containing Butadiene Units
Amraee IA
3901 - 3909 Effect of Magnesium Methacrylate and Zinc Methacrylate on Bond Properties of Thermal Insulation Material Based on NBR/EPDM Blends
Gao GX, Zhang ZC, Zheng YS, Jin ZH
3910 - 3919 The Partial Replacement of Silica or Calcium Carbonate by Halloysite Nanotubes as Fillers in Ethylene Propylene Diene Monomer Composites
Pasbakhsh P, Ismail H, Noor M, Fauzi A, Abu Bakar A
3920 - 3928 Reduction in Tactoid Size as a Means for Reinforcing High-Density Polyethylene/Montmorillonite Nanocomposites
Marega C, Causin V, Marigo A, Ferrara G
3929 - 3943 The Role of a Novel p-phenylen-bis-maleamic Acid Grafted Atactic Polypropylene Interfacial Modifier in Polypropylene/Mica Composites as Evidenced by Tensile Properties
Garcia-Martinez JM, Areso S, Collar EP
3944 - 3953 Enzyme-Based Hydrogels Containing Dextran as Drug Delivery Carriers: Preparation, Characterization, and Protein Release
Lai JY, Fang R, Wang LQ, Tu KH, Zhao CS, Qian XQ, Zhan SL
3954 - 3962 Preparation and Characterization of Ultra-Low Molecular Weight Poly(vinyl alcohol) Graft Copolymer
Guo M, Xia J, Fan Z, Zhao Z, Mi H
3963 - 3971 Adhesion of Surface-Grafted Low-Density Polyethylene Plates with Enzymatically Modified Chitosan Solutions
Noto K, Matsumoto S, Takahashi Y, Hirata M, Yamada K
3972 - 3979 Effects of Molecular Weight on Electroluminescence of Nanogold-Bonded poly(9,9-dioctylfluorene-alt-thiophene) at a Constant Polymer-to-Gold Weight Ratio
Ji HD, Tu YC, Wu SH, Liu CH, Su YW, Tsiang RCC
3980 - 3984 Aqueous Dispersions of DBSA-Doped Polyaniline: One-Pot Preparation, Characterization, and Properties Study
Babazadeh M
3985 - 3992 Mechanical Properties, Thermal Stability, Gas Permeability, and Phase Morphology in Natural Rubber/Bromobutyl Rubber Blends
Rattanasom N, Prasertsri S, Suchiva K
3993 - 4002 Synthesis and Properties of Poly(ether Imide)s Derived from 2,5-Bis(3,4-Dicarboxyphenoxy)biphenyl Dianhydride and Aromatic Ether-Diamines
Hsiao SH, Yang CP, Chen YC, Wang HM, Guo WJ
4003 - 4014 Shear-Induced Crystallization of Injection Molded Vetiver Grass-Polypropylene Composites
Somnuk U, Suppakarn N, Sutapun W, Ruksakulpiwat Y
4015 - 4022 Supercritical Carbon Dioxide-Assisted Loosening Preparation of Dry Leather
Yang QY, Qin SF, Chen JF, Ni W, Xu Q
4023 - 4031 Emulsion Polymerization of Styrene with Amphiphilic Random Copolymer as Surfactant: Predominant Droplet Nucleation
Liu L, Liu XL, Han Y, Chen QR, Yu JF, Liu FQ
4032 - 4041 Microphase Separation Behavior on the Surfaces of Poly(dimethylsiloxane)-block-poly(2,2,3,3,4,4,4-heptafluorobutyl methacrylate) Diblock Copolymer Coatings
Luo ZH, Yu HJ, Zhang W
4042 - 4051 Synthesis, Characterization, and Application of Composite Alginate Microspheres with Magnetic and Fluorescent Functionalities
Liu JW, Zhang Y, Yang T, Ge YQ, Zhang S, Chen ZP, Gu N
4052 - 4065 Synthesis and Characterization of Polyurethane Hybrids: Influence of the Polydimethylsiloxane Linear Chain and Silsesquioxane Cubic Structure on the Thermal and Mechanical Properties of Polyurethane Hybrids
Madhavan K, Reddy BSR
4066 - 4076 Role of Amphiphilic Dopants on the Shape and Properties of Electrically Conducting Polyaniline-Clay Nanocomposite
Reena VL, Sudha JD, Pavithran C
4077 - 4084 Effects of Ingredients on Thermal and Mechanical Properties of Acrylic Bone Cements
Endogan T, Serbetci K, Hasirci N
4085 - 4091 Multiparameter Solution Model and Evaluation of Polymer-Polymer Miscibility Using Inverse Gas Chromatography Data
Huang JC
4092 - 4099 Effect of Network Relaxation on Void Propagation and Failure in Isotactic Polypropylene at Large Strain
Na B, Lv RH, Xu WF
4100 - 4115 Crystallization Kinetics of Poly(L-Lactide)/Carbonated Hydroxyapatite Nanocomposite Microspheres
Zhou WY, Duan B, Wang M, Cheung WL