Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.112, No.1 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (68 articles)

1 - 8 Preparation, Crystallization Behavior, and Melting Characteristics of beta-Nucleated Isotactic Polypropylene Blends with Polyamide 6
Yang ZG, Zhang ZS, Tao YJ, Mai KC
9 - 18 Preparation and Permeation Characterization of beta-Zeolite-Incorporated Composite Membranes
Huang Z, Su JF, Su XQ, Guo YH, Teng LJ, Yang CM
19 - 27 Functionalization via Glycerol Transesterification of Polymerized Soybean Oil
Lubguban AA, Tu YC, Lozada ZR, Hsieh FH, Suppes GJ
28 - 35 Effect of Electron-Beam Irradiation on Ethylene-Methyl Acrylate Copolymer
Mongal N, Chakraborty D, Bhattacharyya R, Chaki TK, Bhattacharya P
36 - 43 Flame-Retardant Properties of Magnesium Hydroxystannate and Strontium Hydroxystannate Coated Calcium Carbonate on Soft Poly(vinyl chloride)
Jiao YH, Xu JZ
44 - 51 Wood Preservation by a Mixed Anhydride Treatment: A C-13-NMR Investigation of Simple Models of Polymeric Wood Constituents
Lyon F, Thevenon MF, Pizzi A, Tondi G, Despres A, Gril J, Rigolet S
52 - 63 Effects of the Nature and Combinations of Solvents in the Intercalation of Clay on the Properties of Polymer with Block Copolymers Nanocomposites
Sen S, Nugay N, Nugay T
64 - 71 N,N-diethyl Dithiocarbamato Group Induced Photografting of Methyl Methacrylate onto Polyurethane
Bhuyan PK, Kakati DK
72 - 81 Dynamic Mechanical Analysis of Ethylene-Propylene-Diene Monomer Rubber and Styrene-Butadiene Rubber Blends
Nair TM, Kumaran MG, Unnikrishnan G, Piiai VB
82 - 88 A Study on the Flame-Retardance of Poly(vinyl chloride) Incorporated with Metal Hydroxystannates
Zhang B, Jiao YH, Xu JZ
89 - 98 Double-Miniemulsion Preparation of Fe3O4/Poly(methyl methacrylate) Magnetic Latex
Hong RY, Feng B, Cai X, Liu G, Li HZ, Ding J, Zheng Y, Wei DG
99 - 106 Influence of Surface Photocrosslinking on Properties of Thermoplastic Starch Sheets
Zhou J, Ma YH, Zhang J, Tong J
107 - 113 The Effect of High Pressure Processing on the Morphology of Polyethylene Films Tested by Differential Scanning Calorimetry and X-ray Diffraction and Its Influence on the Permeability of the Polymer
Yoo S, Lee J, Holloman C, Pascall MA
114 - 122 Fast Responsive Poly(acrylic acid-co-N-isopropyl acrylamide) Hydrogels Based on New Crosslinker
Atta AM, Abdel-Bary EM, Rezk K, Abdel-Azim A
123 - 128 Fast Responsive and Strong Swelling Hydrogels Based on N-Isopropylacrylamide with Sodium Acrylate
Huang H, Zhang D, Mao ZP, Yu WD, Yan HJ
129 - 134 The Effect of the Mixtures of Photoinitiators in Polymerization Efficiencies
Neumann MG, Schmitt CC, Horn MA
135 - 141 Synthesis, Characterization, and Properties of Polymeric Flocculant with the Function of Trapping Heavy Metal Ions
Hao XK, Chang Q, Li XH
142 - 156 Processing and Properties of Carbon Nanotube/Poly(methyl methacrylate) Composite Films
Liu J, Rasheed A, Minus ML, Kumar S
157 - 162 In Situ Determination of Aniline Polymerization Kinetics Through Near-Infrared Spectroscopy
de Souza FG, Anzai TK, Rodrigues MVA, Melo PA, Nele M, Pinto JC
163 - 172 Indentation of an Oriented Transparent Polyamide
Yang Y, Thompson G, Song J, Hiltner A, Baer E
173 - 180 Miniemulsion Copolymerizations of Styrene and Methyl Methacrylate in the Presence of Reactive Costabilizer
Chern CS, Lim H, Cala NA
181 - 187 Preparation of Acrylic Copolymer Latex Modified by Fluorine, Silicon, and Epoxy Resin
Lu DP, Xiong PT, Chen PZ, Huang HZ, Shen L, Guan R
188 - 199 Stress-Induced Changes in Microstructure of a Low-Crystalline Polypropylene Investigated at Uniaxial Stretching
Boger A, Imhof C, Heise B, Marti O, Troll C, Rieger B, Hild S
200 - 207 Characterization of Hyperbranched Polyol Polyesters Based on 2,2-Bis (methylol Propionic Acid) and Pentaerythritol
Murillo EA, Vallejo PP, Sierra L, Lopez BL
208 - 217 Improving Blood Compatibility of Natural Rubber by UV-Induced Graft Polymerization of Hydrophilic Monomers
Hoven VP, Chombanpaew K, Iwasaki Y, Tasakorn P
218 - 225 Effect of Organic Peroxides on the Morphology and Properties of EVA/Cloisite 15A Nanocomposites
Mishra SB, Luyt AS
226 - 234 Comparison of the Thermal Degradation of Natural, Alkali-Treated and Silane-Treated Hemp Fibers Under Air and an Inert Atmosphere
Rachini A, Le Troedec M, Peyratout C, Smith A
235 - 243 Effect of Wettability and Silicone Surface Modification on the Self-Cleaning Functionalization of Wool
Tung WS, Daoud WA
244 - 253 Soluble New Optically Active Polyamides Derived from 5-(4-Methyl-2-phthalimidylpentanoylamino)isophthalic acid and Different Diisocyanates Under Microwave Irradiation in Molten Ionic Liquid
Mallakpour S, Dinari M
254 - 260 Crystallization, Mechanical, and Rheological Behavior of Polyvinylidene Fluoride/Carbon Nanofiber Composites
Vidhate S, Shaito A, Chung J, D'Souza NA
261 - 268 Carboxylmethylcellulose/Bentonite Composite Gels: Water Sorption Behavior and Controlled Release of Herbicide
Li JF, Lu JH, Li YM
269 - 274 Thermochromic Core-Shell Nanofibers Fabricated by Melt Coaxial Electrospinning
Li FY, Zhao Y, Wang S, Han D, Jiang L, Song YL
275 - 282 Solid-State Graft Polymerization of Styrene in Spherical Polypropylene Granules in the Presence of TEMPO
Sun FL, Fu ZS, Deng QT, Fan ZQ
283 - 289 Bonding Properties Between Nitrile-Butadiene Rubber and Aluminum Alloy Treated by Anodizing Methods
Zhang XF, Fan L, Zhao XH, Zhang LQ, Liu L, Zuo Y
290 - 298 B-Staged Epoxy/Single-Walled Carbon Nanotube Nanocomposite Thin Films for Composite Reinforcement
Warren GL, Sun LY, Hadjiev VG, Davis D, Lagoudas D, Sue HJ
299 - 308 Characterization of Flexible Polyurethane Foams based on Soybean-Based Polyols
Das S, Dave M, Wilkes GL
309 - 314 Preparation and Characterization of Petroleum-Pitch-Based Carbon Aerogels
Zeng XH, Wu DC, Fu RW
315 - 319 Synthesis of a Photoimmobilizable Histidine Polymer for Surface Modification
Sakuragi M, Tsuzuki S, Hasuda H, Wada A, Matoba K, Kubo I, Ito Y
320 - 334 Preparation of Polypropylene-Clay Nanocomposites by the Co-Intercalation of Modified Polypropylene and Short-Chain Amide Molecules
Ratnayake UN, Haworth B, Hourston DJ
335 - 344 Synthesis and Characterization of Graft Copolymers of Syndiotactic Polystyrene with Polybutadiene and 4-Methylstyrene
Srinate N, Thongyai S, Praserthdam P
345 - 352 Mechanical Properties of Poly(epsilon-caprolactone) and Poly(lactic acid) Blends
Simoes CL, Viana JC, Cunha AM
353 - 358 Swelling Behavior of Poly(acrylamide)/Clay Nanocomposite Hydrogels in Acrylamide Aqueous Solution
Jiang YM, Zhu MF, Li BA, Liu Y, Qin ZY, Chen L, Chen YM
359 - 365 Influence of the Surface Modification of a Filler on the Properties of High-Impact Polystyrene Composites
Cui WG, Gao YL, Wei Q, Mu W
366 - 371 Ultrasonic and Mechanical Measurements for the Detection of Crosslink Density of SBR and NBR Based on Various Curing Systems
Lawandy SN, Halim SF, Afifi HA
372 - 380 Spoliation of Fluoroperm Rigid Gas Permeable Contact Lens by Sodium Chloride: A Positron Annihilation Study
Urs MVD, Ranganathaiah C
381 - 389 Photochemistry of Low-Density Polyethylene-Montmorillonite Composites
Ghafor WA, Halley PJ, Hill DJT, Martin DJ, Rasoul F, Whittaker AK
390 - 401 Poly(ethylene glycol)-Based Hydrogels as Cartilage Substitutes: Synthesis and Mechanical Characteristics
Rakovsky A, Marbach D, Lotan N, Lanir Y
402 - 409 Preparation of Polyelectrolyte Complex Membranes Based on Sodium Cellulose Sulfate and Poly(dimethyldiallylammonium chloride) and Its Permeability Properties
Li MM, Yao SJ
410 - 415 Emulsifier-Free Emulsion Polymerization of Acrylonitrile in the Presence of Poly(methyl methacrylate) Seed Particles: Influence of the Addition Mode on the Surface Morphology
Yang GZ, Liu Y, Jia RP, Xu RS, Wang X, Ling LC, Yang JH
416 - 424 Controlled Delivery of Diclofenac Sodium from Calcium Alginate Beads Loaded with a Drug-Resin Complex
Saxena S, Bajpai SK
425 - 433 Electrical Conductivity of Carbon-Filled Polypropylene-Based Resins
King JA, Johnson BA, Via MD, Ciarkowski CJ
434 - 438 Synthesis and Characterization of Poly(aryl ether ketone) Oligomers Terminated with Metallophthalocyanine to be Used for Oxidative Decomposition of TCP
Zhang YH, Guo MM, Guan SW, Zhang Y, Jiang ZH
439 - 446 Synthesis and Water Absorbency of Polyampholytic Hydrogels with Antibacterial Activity
Li XH, Dong QZ, He PX
447 - 453 Effects of Alkalization and Fiber Loading on the Mechanical Properties and Morphology of Bamboo Fiber Composites. II. Resol Matrix
Das M, Chakraborty D
454 - 460 LnNa(8)[OC(CH3)(3)](10)(OH) Alkoxide Clusters: Highly Active Single-Component Catalysts for the Homopolymerization and Copolymerization of epsilon-Caprolactone and Trimethylene Carbonate
Sheng HT, Li JM, Zhang Y, Yao YM, Shen Q
461 - 472 Polyimides Based on Aromatic Diisocyanates Containing Pendent Flexible Alkoxy Chains and Aromatic Dianhydrides: Synthesis, Characterization, and Liquid-Crystal Alignment Properties
Sarkar A, Halhalli MR, Kulkarni AD, Wadgaonkar PP
473 - 478 Synthesis and Characterization of Poly(carbonate urethane) Networks with Shape-Memory Properties
Feng YK, Xue Y, Guo JT, Cheng L, Jiao LC, Zhang Y, Yue JL
479 - 488 Sisal Chemo-Thermomechanical Pulp Paper with a Strongly Hydrophobic Surface Coating Produced by a Pentafluorophenyldimethylsilane Cold Plasma
Navarro F, Davalos F, Gonzalez-Cruz R, Lopez-Dellamary F, Manriquez R, Turrado J, Ramos J
489 - 495 The Effect of Alkalization and Fiber Loading on the Mechanical Properties of Bamboo Fiber Composites, Part 1: - Polyester Resin Matrix
Das M, Chakraborty D
496 - 504 Synthesis and Polymerization of Novel Epoxy Compounds Having an Adamantane Ring and Evaluation of their Heat Resistance and Transparency
Maehara T, Takenaka J, Tanaka K, Yamaguchi M, Yamamoto H, Ohshita J
505 - 512 Development of Redox-Mediated Oxysilane Sol-Gel Biosensors on Carbon-Film Electrode Substrates
Pauliukaite R, Gouveia-Caridade C, Liess HD, Brett CMA
513 - 523 New Polymer Syntheses, Part 43: Novel Polyamides-Based Diarylidenecyclopentanone: Synthesis, Characterization, and Corrosion Inhibition Behavior
Aly KI, Wahdan MH, Hussein MA
524 - 531 Thermal Degradation Behavior of Styrene-Butadiene-Styrene Tri-Block Copolymer/Multiwalled Carbon Nanotubes Composites
Lu L, Yu HY, Wang SF, Zhang Y
532 - 540 Production of Highly Crosslinked Microspheres by the Precipitation Polymerization of 2-(Diethylamino)ethyl Methacrylate with Two or Three Functional Crosslinkers
Tunc Y, Ulubayram K
541 - 549 Characterization of Associating Hydrogels of Poly(vinyl alcohol) and Poly(vinyl pyrrolidone)
Liu X, Fussell G, Marcolongo M, Lowman AM
550 - 556 Preparation and Characterization of Composite Membranes of Polysulfone and Microcrystalline Cellulose
Zhang LP, Chen GW, Tang HW, Cheng QZ, Wang SQ
557 - 562 Tetrahydrosalen-Stabilized, Chloride-Containing Rare-Earth Complexes: Facile Initiator Precursors for the Preparation of Hydroxytelechelic Poly(epsilon-caprolactone)s
Wu GM, Sun WL, Shen ZQ
563 - 571 Characterization and Evaluation of Supported rac-Dimethylsilylenebis(indenyl)zirconium Dichloride on Ethylene Polymerization
Franceschini FC, Tavares TTD, Bianchini D, Alves MDM, Ferreira ML, dos Santos JHZ