화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.105, No.6 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (87 articles)

3153 - 3161 Castor oil-based polyurethane--polyester nonwoven fabric composites: Mechanical properties, chemical resistance, and water sorption behavior at different temperatures
Kumar MNS, Manjula KS, Siddaramaiah
3162 - 3170 Effect of molecular structure of hybrid precursors on the performances of novel hybrid zwitterionic membranes
Liu JS, Xu TW, Fan GN, Fu YX
3171 - 3182 Influence of the copolymer architecture and composition on the response and mechanical properties of pH-sensitive fibers
Sahoo A, Jassal M, Agrawal AK
3183 - 3194 Preparation of poly(methyl methacrylate) nanocomposites with superior impact strength
Singh D, Jayasimha T, Rai KN, Kumar A
3195 - 3203 Grafting of poly(methyl acrylate) onto sulfite pulp fibers and its effect on water absorbance
Jain V, Xiao HN, Ni YH
3204 - 3210 Biodegradable Poly(L-lactic acid)/Poly(butylene succinate-co-adipate) blends: Miscibility, morphology, and thermal Behavior
Wang Y, Mano JF
3211 - 3219 Application of conducting Poly(aniline-co-Pyrrole)Film to cholesterol biosensor
Solanki PR, Singh S, Prabhakar N, Pandey MK, Malhotra BD
3220 - 3227 Study of the interaction of poly(acrylic acid) and poly(acrylic acid-poly acrylamide) complex with bone powders and hydroxyapatite by using TGA and DSC
Moharram MA, Allam MA
3228 - 3234 Application of Fourier transform infrared Spectroscopy to study the interactions of poly(acrylic acid) and mixtures of poly(acrylic acid) and polyacrylamide with bone powders and Hydroxyapatites
Moharram MA, Allam MA
3235 - 3239 Photodegradation of cellulose acetate film in the presence of benzophenone as a photosensitizer
Hosono K, Kanazawa A, Mori H, Endo T
3240 - 3245 Synthesis and characterization of cationic guar gum: A high performance flocculating agent
Pal S, Mal D, Singh RP
3246 - 3254 All-trans retinoic acid release from polyion-complex micelles of methoxy poly(ethylene glycol) grafted chitosan
Kim DG, Jeong YI, Nah JW
3255 - 3259 Vulcanization kinetics of low-protein natural rubber with use of a vulcameter
Wang PY, Chen Y, Qian HL
3260 - 3273 Effect of an organic dicarboxylic acid salt on fractionated crystallization of polypropylene droplets
Jin Y, Hiltner A, Baer E
3274 - 3279 Effect of cavitation on the plastic deformation and failure of isotactic polypropylene
Na B, Lv RH
3280 - 3286 Structure control of polyphenylene sulfide membrane prepared by thermally induced phase separation
Ding HY, Zhang Q, Wang F, Tian Y, Wang LH, Shi YQ, Liu BQ
3287 - 3294 Fracture surface morphology in thermosets modified with hollow microspheres
Kim HS
3295 - 3300 Thermal decomposition of copolymers used in dental resins formulations photocured by ultra blue IS
Rigoli IC, Cavalheiro CCS, Neumann MG, Cavalheiro ETG
3301 - 3308 Etherification of hemicelluloses from sugarcane bagasse
Ren JL, Sun RC, Liu CF
3309 - 3316 Thermal conductivity models for Carbon/Liquid crystal polymer composites
Keith JM, King JA, Lenhart KM, Zimny B
3317 - 3322 Flame retarding glass fibers reinforced polyamide 6 by melamine polyphosphate/polyurethane-encapsulated solid acid
Wang ZY, Feng ZQ, Liu Y, Wang Q
3323 - 3327 Studies on the preparation of branched polymers from styrene and divinylbenzene
Tang HL, Gong FH, Liu CL, Ren Q, Yang Y, Jiang BB, Liu C, Chen JH
3328 - 3332 Behavior of composite materials under microorganisms of soil
Legonkova OA, Selitzkaya OV
3333 - 3354 Pressure distribution analysis of fiber reinforced plastic components made by rubber pressure moulding technique
Kar KK, Sharma SD, Kumar P, Ramkumar J, Appaji RK, Reddy KRN
3355 - 3362 Preparation of Ultrahigh-Molecular-Weight polyethylene membranes via a thermally induced phase-separation method
Ding HY, Tian Y, Wang LH, Liu BQ
3363 - 3370 Polyethylene glycol and polyvinyl alcohol as corrosion inhibitors for aluminium in acidic medium
Umoren SA, Ogbobe O, Okafor PC, Ebenso EE
3371 - 3377 The pH-dependent surface properties of gelatin-alkenylsuccinic acid anhydride derived surfactants
Lin LH, Chen KM, Wang CC
3378 - 3390 Properties of nanocomposites based on maleate-vinyl ether donor-acceptor UV-Curable systems
Ravindran N, Vora A, Webster DC
3391 - 3401 Microemulsion and conventional emulsion copolymerizations of styrene with methyl methacrylate
Reddy GVR, Devi NG, Panda J
3402 - 3408 Study of miscibility, crystallization, mechanical properties, and thermal stability of blends of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)
Luo RC, Xu KT, Chen GQ
3409 - 3417 Chemical modification of metallocene-based polyethylene-octene elastomer through solution grafting of acrylic acid and its effect on the physico-mechanical properties
Biswas A, Bandyopadhyay A, Singha NK, Bhowmick AK
3418 - 3425 Pyromellitic dianhydride-modified beta-cyclodextrin microspheres for Pb(II) and Cd(II) adsorption
Li FY, Sun XM, Zhang H, Li BH, Gan FX
3426 - 3431 Pan-milling to prepare ultrafine high-density polyethylene powder with sodium chloride serving as grinding aid
Liu Y, Li J, Wang Q
3432 - 3438 In vitro degradation and protein release of Semi-IPN hydrogels consisted of poly(acrylic acid-acrylamide-methacrylate) and amylose
Li SF, Yang YJ, Yang XL, Xu HB
3439 - 3443 Effect of monomer temperature on foaming and properties of flexible polyurethane foams
Harikrishnan G, Khakhar DV
3444 - 3447 Investigations of the preparation technology for polyglycolic acid fiber with perfect mechanical performance
Yang Q, Shen XY, Tan ZQ
3448 - 3457 PMMA-multigraft copolymers derived from linseed oil, soybean oil, and linoleic acid: Protein adsorption and bacterial adherence
Cakmakli B, Hazer B, Acikgoz S, Can M, Comert FB
3458 - 3461 Synthesis and characterization superabsorbent-ethanol polyacrylic acid gels
Zhao QC, Liu CL
3462 - 3469 Compressive response and energy absorption of foam EPDM
Wang BQ, Peng ZL, Zhang Y, Zhang YX
3470 - 3475 A fast response resistive thin film humidity sensor based on poly(4-vinylpyridine) and poly(glycidyl methacrylate)
Chen YS, Li Y, Yang MJ
3476 - 3482 Study on superabsorbent composite. - XII. - Effect of ion-exchanged attapulgite on water absorbency of poly(acrylic acid)/attapulgite superabsorbent composites
Li A, Zhao YG, Wang AQ
3483 - 3491 The effect of inter-fiber distance on the interfacial properties in E-glass fiber/epoxy model composites
Moon CK, Holmes GA, McDonough WG
3492 - 3499 Poly(methyl acrylate) and copolymer of acrylic acid and butyl acrylate prepared by gamma-irradiation in the presence of 1,1-diphenylethene: Synthesis and application in emulsion polymerization
Wu ZT, Zhang ZC
3500 - 3504 Banded spherulites in poly(L-lactic acid): Effects of the crystallization temperature and molecular weight
Wang YM, Mano JF
3505 - 3512 Synthesis and characterization of functionalized triblock polymer: The prepared polymer is cholesteryl terminated and chain-extended PCL
Guo JB, Sun J, Cao H, Zhao DY, Yang H
3513 - 3518 Estimation of phase diagrams for copolymer-diluent systems in thermally induced phase separation
Lv R, Zhou J, Xu P, Du QG, Wang HT, Zhong W
3519 - 3524 Side chain functionality dominated the chromatography of N-protected amino acid on molecularly imprinted polymer
Lin YC, Pan HH, Hwang CC, Lee WC
3525 - 3530 Encapsulation of magnetic particles via miniemulsion polymerization of styrene. - II. - Effect of some parameters on the polymerization of styrene
Zhang QY, Xie G, Zhang HP, Zhang JP, He M
3531 - 3542 Isothermal crystallization kinetics and melting behavior of multiwalled carbon nanotubes/polyamide-6 composites
Li J, Fang ZP, Zhu Y, Tong LF, Gu AJ, Uu F
3543 - 3550 Synthesis and characterization of copolythiophene
He J, Su ZJ, Yu BY, Xiang L, Yan B, Wang YH
3551 - 3561 Elongational rheology by different methods and orientation number
Collier JR, Petrovan S, Hudson N, Wei XL
3562 - 3567 Heat capacity measurement in polymers using a differential scanning calorimeter: Area measurement method
Hernandez-Sanchez F
3568 - 3577 Synthesis and characterization of polyurea microcapsules containing essential oils with antigerminative activity
Scarfato P, Avallone E, Iannelli P, De Feo V, Acierno D
3578 - 3587 Functionalization of industrial polypropylene films via the swift-heavy-ion-induced grafting of glycidyl methacrylate
Chawla S, Ghosh AK, Avasthi DK, Kulriya P, Ahmad S
3588 - 3596 Evaluation of the reinforcing effect of ground wood pulp in the preparation of polypropylene-based composites coupled with maleic anhydride grafted polypropylene
Mendez JA, Vilaseca F, Pelach MA, Lopez JP, Barbera L, Turon X, Girones J, Mutje P
3597 - 3601 Synthesis of high-molecular-weight poly(lactic acid) from aqueous lactic acid cocatalyzed by epsilon-caprolactam and tin(II) chloride dihydrate
Lei ZQ, Wang SF, Bai YB
3602 - 3611 Host-guest phenomena in polystyrene networks
Joseph M, Mathew T, George K, Mathew TV, Kuriakose S
3612 - 3617 Comparison of the influence of different compatibilizers on the structure and properties of ethylene vinyl acetate copolymer/modified clay nanocomposites
Guduri BR, Luyt AS
3618 - 3622 Fabrication of Au/PVP by electrospinning nanofiber composites by electrospinning
Wang YZ, Li YX, Sun G, Zhang GL, Liu H, Du JS, Yang SA, Bai J, Yang QB
3623 - 3633 Effect of end group content on photochromic behavior of spiropyran in polycaprolactone-poly(ethylene succinate) blends
Samoladas A, Jannakoudakis A, Bikiaris D, Chrissafis K, Paraskevopoulos KM
3634 - 3639 Polymerization of acrylonitrile using potassium peroxydisulfate as an initiator in the presence of a multisite phase-transfer catalyst: A kinetic study
Vajjiravel M, Umapathy MJ, Bharathbabu M
3640 - 3648 Pervaporation characteristics and structure of poly(vinyl alcohol)/Poly(ethylene glycol)/Tetraethoxysilane hybrid membranes
Ye LY, Liu QL, Zhang QG, Zhu AM, Zhou GB
3649 - 3655 Novel high-dielectric-permittivity poly(vinylidene fluoride)/polypropylene blend composites: The influence of the poly(vinylidene fluoride) concentration and compatibilizer
Dang ZM, Yan WT, Xu HP
3656 - 3661 pH-sensitive swelling and release behaviors of anionic hydrogels for intelligent drug delivery system
Kim BS, Shin YC
3662 - 3672 Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index
Nakayama N, Hayashi T
3673 - 3678 Effect of blending high-pressure low-density polyethylene on the crystallization kinetics of linear low-density polyethylene
Liu JMK, Nozue Y, Nagamatsu T, Hosoda S
3679 - 3688 Degradation behavior of polyoxymethylene: Influence of different stabilizer packages
Archodoulaki VM, Luftl S, Seidler S
3689 - 3697 Synthesis and properties of hydrogen-bonded poly(amide-imide) hybrid films
Tsai MH, Huan SL, Lin JCM, Ko CJ, Chen YL, Lu CM, Chen CJ, Yeni CH
3698 - 3707 The effect of high power ultrasound on EPDM gum in extrusion process
Yun JS, Isayev AI
3708 - 3714 The physical properties of hemofiltration module made from polyether sulfone hollow fiber membrane
He CJ, Zhu SJ, Sun JF, Wang QR
3715 - 3722 Syntactic foam composites of epoxy-allyl phenol-bismaleimide ternary blend - Processing and properties
Devi KA, John B, Nair CPR, Ninan KN
3723 - 3727 Fiber and web formation of melt-blown thermoplastic polyurethane polymers
Lee YE, Wadsworth LC
3728 - 3738 Adhesion properties of swollen hydrogels evaluated by a point-contact method
Suzuki A, Sato T, Sakasegawa D, Sawada H, Goto M
3739 - 3746 Characterization of liquefied wood residues from different liquefaction conditions
Pan H, Shupe TF, Hse CY
3747 - 3756 Development of flame retardancy properties of new halogen-free phosphorous Doped SiO2 Thin films on fabrics
Cireli A, Onar N, Ebeoglugil MF, Kayatekin I, Kutlu B, Culha O, Celik E
3757 - 3772 Morphological analysis of highly filled propylene/ethylene copolymers
Lonescu-Vasii LL, Wood-Adams PM, Duchesne E, L'Esperance G, Karjala T, Ansems P
3773 - 3779 Effect of adding sulphur to the dope on properties of modified polyacrylonitrile fibers
Wang YX, Wang CG
3780 - 3786 Synthesis of monomethoxy poly(ethylene glycol) without diol poly(ethylene glycol)
Zhang J, Zhao YJ, Su ZG, Ma GH
3787 - 3793 Comparative photo-oxidation under natural and accelerated conditions of polypropylene nanocomposites produced by extrusion and injection molding
Diagne M, Gueye M, Dasilva A, Tidjani A
3794 - 3801 Effects of ion group content and polyol molecular weight on physical properties of HTPB-based waterborne poly(urethane-urea)s
Huang SM, Chen TK
3802 - 3808 Curing and thermal behavior of DGEBA in presence of dianhydrides and aromatic diamine
Jain R, Choudhary V, Narula AK
3809 - 3816 Reswelling transition of poly(sodium acrylate) gels due to destruction of hydrogen bonds observed by ATR FTIR svectroscopy
Sato H, Hirashima Y, Suzuki A
3817 - 3823 A water-soluble supramolecular-structured photoinitiator between methylated beta-cyclodextrin and 2,2-dimethoxy-2-phenylacetophenone
Wang YL, Jiang XS, Yin J
3824 - 3833 Transparent antifouling coatings via nanoencapsulation of a biocide
Zhang M, Cabane E, Claverie J
3834 - 3850 Morphology, deformation behavior and thermomechanical properties of polypropylene/maleic anhydride grafted polypropylene/layered silicate nanocomposites
Dubnikova IL, Berezina SM, Korolev YM, Kim GM, Lomakin SM
3851 - 3857 Mechanical properties and microstructure of acrylonitrile-butadiene rubber vulcanizates reinforced by in situ polymerized phenolic resin
Ye LZ, Zhang YH, Wang ZB
3858 - 3864 In vitro monitoring of surface mechanical properties of poly(L-lactic acid) using microhardness
Saiz-Arroyo C, Wang Y, Rodriguez-Perez MA, Alves NM, Mano JF