화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.105, No.4 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (90 articles)

1713 - 1722 Characterization of metallized biaxially oriented polypropylene film
Vassiliadi E, Tarantili PA
1723 - 1731 The effect of silica nanoparticles on the thermomechanical properties of polystyrene
Kontou E, Anthoulis G
1732 - 1739 Continuous phenol biodegradation at high concentrations in an immobilized-cell hollow fiber membrane bioreactor
Li Y, Loh KC
1740 - 1748 Effect of steady shear on the microstructural evolution of melt-intercalated polymer/clay nanocomposites
Wu DF, Zhou CX, Zhang M
1749 - 1756 Separation of binary mixtures of carbon dioxide and methane through sulfonated polycarbonate membranes
Sridhar S, Aminabhavi TM, Ramakrishna M
1757 - 1765 Effect of in situ synthesized macroactivator on morphology of PA6/PS blends via successive polymerization
Pei AH, Liu AD, Xie TX, Yang GS
1766 - 1773 Effects of impregnation materials on combustion properties of laminated veneer lumber obtained from European oak (Quercus petraea Liebl.) and Lombardy poplar (Populus nigra L.)
Keskin H
1774 - 1785 Preparation and cell compatibility evaluation of chitosan/collagen composite scaffolds using amino acids as crosslinking bridges
Tsai SP, Hsieh CY, Hsieh CY, Wang DM, Huang LLH, Lai JY, Hsieh HJ
1786 - 1792 Preparation and magnetic properties of Fe/Si/C/N ceramics derived from a polymeric precursor
Li JP, Zhang ZJ, Zheng ZM, Guo L, Xu GY, Xie ZM
1793 - 1801 Synthesis and liquid-crystal-aligning properties of novel aromatic poly(amide imide)s bearing n-alkyloxy side chains
Sarkar A, More AS, Wadgaonkar PP, Shin GJ, Jung JC
1802 - 1807 Synthesis of urethane oils from palm oil and waste PET bottles
Saravari O, Pathomwattanasak K, Pimpan V
1808 - 1816 Poly(acrylamide-allyl glycidyl ether) cryogel as a novel stationary phase in dye-affinity chromatography
Demiryas N, Tuzmen N, Galaev IY, Piskin E, Denizli A
1817 - 1824 Carboxyl-terminated butadiene acrylonitrile rubber/epoxy polymer alloys as damping adhesives and energy absorbable resins
Kishi H, Nagao A, Kobayashi Y, Matsuda S, Asami T, Murakami A
1825 - 1832 Effect of natural rubber on wood-reinforced tannin composites
Mosiewicki MA, Aranguren MI, Curvelo AAS, Borrajo J
1833 - 1843 Synthesis and characterization of polyamide powders for sorption of reactive dyes from aqueous solutions
Suteu D, Bilba D, Dan F
1844 - 1852 Effect of casting solvent on characteristics of hexanoyl chitosan/polylactide blend films
Peesan M, Supaphol P, Rujiravanit R
1853 - 1860 Organic/inorganic hybrid of polyaniline/BaTiO3 composites and their electrorheological and dielectric characteristics
Fang FF, Kim JH, Choi HJ, Seo Y
1861 - 1868 Synthesis and characterization of a liquid crystalline epoxy containing azomethine mesogen for modification of epoxy resin
Gao ZY, Yu YF, Xu YZ, Li SJ
1869 - 1881 Parameters affecting the grafting reaction and side reactions involved in the free-radical melt grafting of maleic anhydride onto high-density polyethylene
Sheshkali HRZ, Assempour H, Nazockdast H
1882 - 1887 Synthesis and characterization of carboxyl-functionalized magnetic nanogel via "green" photochemical method
Hong J, Gong PJ, Xu DM, Sun HW, Yao SD
1888 - 1893 Application of FTIR spectroscopy for structural characterization of ternary poly(acrylic acid)-metal-poly(vinyl pyrrolidone) complexes
Moharram MA, Khafagi MG
1894 - 1902 Characterization of poly(isobornyl acrylate) as a construction material for microfluidic applications
Lopez-Garcia MDC, Beebe DJ, Crone WC
1903 - 1907 Dyeing of polylactide fibers in supercritical carbon dioxide
Wen HB, Dai JJ
1908 - 1913 Effects of drying process for amorphous waxy maize starch on theophylline release from starch-based tablets
Yoon HS, Kweon DK, Lim ST
1914 - 1921 Morphological study of LLDPE-NR reactive blending with maleic anhydride
Magaraphan R, Skuarriya R, Kohjiya S
1922 - 1929 Graft copolymerization of methacrylic add onto xanthan gum by Fe2+/H2O2 redox initiator
Kumar R, Srivastava A, Behari K
1930 - 1936 Contribution of shape on ignition of polymeric materials
Endoh K, Mizuno K, Ueno T, Ishikawa T, Yukumoto M, Takeda K
1937 - 1946 Analysis of the effect of the amount and type of montmorillonite on the supermolecular structure, porosity, and properties of polyimidoamide fibres
Mikolajczyk T, Rabiej S, Olejnik M
1947 - 1957 Aqueous reactive polyurethane prepolymer with poly(ethylene oxide) monomethyl ether side chains for the hydrophilic finishing of poly(ethylene terephthalate) fabrics
Yen MS, Huang CN, Hong PD
1958 - 1963 Study of the water uptake and internal defects of jute-reinforced polymer composites with a digital neutron radiography technique
Alam MK, Khan MA, Lehmann EH, Vontobel P
1964 - 1967 Kinetics and equilibrium of cobalt ion adsorption on cross-linked polyethylenimine membrane
Shentu BQ, Zhu Q, Liu Q, Weng ZX
1968 - 1977 Effect of SiC whisker on benzoxazine-epoxy-phenolic ternary systems: Microwave curing and thermomechanical characteristics
Rimdusit S, Jiraprawatthagool V, Jubsilp C, Tiptipakorn S, Kitan T
1978 - 1986 Allylamine plasma-polymerization on PLLA surface evaluation of the biodegradation
Guerrouani N, Baldo A, Bouffin A, Drakides C, Guimon MF, Mas A
1987 - 1992 Polymer clay self-assembly complexes on paper
Ou RQ, Zhang JG, Deng YL, Ragauskas AJ
1993 - 1999 Effects of clay dispersion and content on the rheologicalf mechanical properties, and flame retardance of HDPE/clay nanocomposites
Lee YH, Park CB, Sain M, Kontopouiou M, Zheng W
2000 - 2007 Formation of microporous membrane of isotactic polypropylene in dibutyl phthalate-soybean oil via thermally induced phase separation
Chen G, Lin YK, Wang XL
2008 - 2011 Morphology development of high-density rigid polyurethane foam upon compression by on-line scanning electronic microscope
Shi L, Li ZM
2012 - 2019 Effect of TRITONTM X-based dispersants bearing a carboxylic terminal group on rheological properties of BAM/Ethyl cellulose/terpineol paste
Lee DI, Lee SM, Lee ES, Choi JY, Bae JY
2020 - 2026 Novel modification of cyanate ester by epoxidized polysiloxane
Yang CZ, Gu AJ, Song HW, Xu ZB, Fang ZP, Tong LF
2027 - 2035 Photoinitiation properties of heterocyclic hexaarylbiimidazoles with high UV-vis absorbance
Shi YT, Wang BH, Jiang XS, Yin J, Kaji M, Yori H
2036 - 2045 Microwave absorbing rubber composites containing carbon black and aluminum powder
Tanrattanakul V, Bunchuay A
2046 - 2053 Effect of low temperature plasma treatment on the electroless nickel plating of polyester fabric
Yuen CWM, Jiang SQ, Kan CW, Tung WS
2054 - 2061 Effect of strain on the properties of a styrene-butadiene rubber filled with multiwall carbon nanotubes
Bokobza L, Belin C
2062 - 2072 Accelerated ageing versus realistic ageing in aerospace composite materials. III. The chemistry of thermal ageing in bismaleimide based composites
Dao B, Hodgkin J, Krstina J, Mardel J, Tian W
2073 - 2082 Transparent photo-curable co-polyacrylate/silica nanocomposites prepared by sol-gel process
Chou YC, Wang YY, Hsieh TE
2083 - 2090 Phase separation of poly(N-isopropylacrylamide) solutions and gels using a near infrared fiber laser
DeRosa ME, DeRosa RL, Noni LM, Hendrick ES
2091 - 2097 Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide
Kongdee A, Okubayashi S, Tabata I, Hori T
2098 - 2112 Effect of viscoelasticity in the film-blowing process
Beaulne M, Mitsoulis E
2113 - 2120 Crosslinked poly(octadecene-alt-maleic anhydride) copolymers as crude oil sorbers
Atta AM, El-Hamouly SH, AlSabagh AM, Gabr MM
2121 - 2128 Rheological characterization of chitosan matrices: Influence of biopolymer concentration
Diez-Sales O, Dolz M, Hernandez MJ, Casanovas A, Herraez M
2129 - 2137 Differential microemulsion polymerization of styrene: A mathematical kinetic model
He GW, Pan QM, Rempel GL
2138 - 2145 Role of fluorocarbon surfactant in the preparation of polytetrafluoroethylene-modified polyacrylate emulsion
Cui XJ, Chen ZX, Li QS, Zhong SL, Wang YH, Wang HY
2146 - 2154 Synthesis and characterization of novel functional inorganic-organic hybrid material with macromolecule metal complex by atom transfer radical polymerization
Xu YX, Li HT, Wang D, Li YP, Song YT, Ai P, Wang JY
2155 - 2163 Synthesis and characterization of methoxypolyethyleneglycol and lauric acid grafted novel polyurethanes for controlled release of nifedipine
Shelke NB, Aminabhavi TM
2164 - 2175 Graft copolymerization of vinyl monomers onto silk fibers initiated by a semiconductor-based photocatalyst
Ojah R, Dolui SK
2176 - 2184 Surface-modified silica nanoparticles for reinforcement of PMMA
Hong RY, Fu HP, Zhang YJ, Liu L, Wang J, Li HZ, Zheng Y
2185 - 2189 Effect of a chiral dopant on the electro-optical properties of polymer-dispersed liquid-crystal films
Li WB, Zhang HX, Wang LP, Ouyang CB, Ding XK, Cao H, Yang H
2190 - 2197 Noncovalent imprinted microspheres: Preparation, evaluation and selectivity of DBU template
Del Sole R, De Luca A, Catalano M, Mele G, Vasapollo G
2198 - 2202 Sesbania gum xanthate supported palladium complex as an efficient catalyst for Heck reaction
Zhang L, Zhang PY, Li X, Cui YC
2203 - 2207 Polymeric decontaminant: N,N-dichloro poly(styrene-co-divinyl benzene) sulfonamide - Synthesis, characterization and efficacy against simulant of sulfur mustard
Gutch PK, Shrivastava RK, Dubey DK
2208 - 2217 Simultaneous graft copolymerization of 2-hydroxyethyl methacrylate and acrylic acid onto polydimethylsiloxane surfaces using a two-step plasma treatment
Karkhaneh A, Mirzadeh H, Ghaffariyeh AR
2218 - 2224 Determination of some physical and mechanical properties of laminated veneer lumber impregnated with boron compounds
Ozcifci A, ors Y, Uysal B
2225 - 2235 Conductivity relaxation in zirconia nanoparticles dispersed in conducting polymer
Dey A, De SK
2236 - 2244 Morphology, thermal, and mechanical properties of acrylonitrile-butadiene-styrene/carbon black composites
Shenavar A, Abbasi F
2245 - 2251 Alternate method for grafting thermoresponsive polymer for transferring in vitro cell sheet structures
Kumar PRA, Sreenivasan K, Kumary TV
2252 - 2259 Hierarchy structure in injection molded polypropylene/ethylene-octane copolymer blends
Li J, Zhang XQ, Qu C, Zhang Q, Du RN, Fu Q
2260 - 2264 Electrodeposition of NiOx/PANI composite film and its catalytic properties towards electrooxidations of polyhydroxyl compounds
Peng XY, Li W, Liu XX, Hua PJ
2265 - 2270 New solvent for polyrotaxane. III. Dissolution of a poly(ethylene glycol)/cyclodextrin polyrotaxane in a calcium thiocyanate aqueous solution or N-methylmorpholine-N-oxide monohydrate
Araki J, Kataoka T, Ito K
2271 - 2279 Triblock poly(lactic acid)-b-poly(ethylene glycol)-b-poly(lactic acid)/paclitaxel conjugates: Synthesis, micellization, and cytotoxicity
Xie ZG, Lu TC, Chen XS, Lu CH, Zheng YH, Jing XB
2280 - 2286 Effect of minor addition of xanthan on cross-linking of rice starches by dry heating with phosphate salts
Chung HJ, Min D, Kim JY, Lim ST
2287 - 2293 Production and characterization of polypropylene fiber upon addition of selective peroxide during melt spinning and comparison with conventional polypropylene fibers
Kalantari B, Rahbar RS, Mojtahedi MRM, Shoushtari SAM, Khosroshahi A
2294 - 2298 Characterization of phase morphology of polymer melts (PP/PE blends) via rheology
Vincze-Minya KA, Schausberger A
2299 - 2305 Preparations and properties of thermosensitive terpolymers of N-isopropylacrylamide, sodium 2-acrylamido-2-methyl-propanesuphonate, and N-tert-butylacrylamide
Shao D, Ni CH
2306 - 2313 Modification of silica gel, cellulose, and polyurethane with a sterically hindered N-halamine moiety to produce antimicrobial activity
Barnes K, Liang J, Worley SD, Lee J, Broughton RM, Huang TS
2314 - 2320 Characterization of acrylic acid-grafted PP membranes prepared by plasma-induced graft polymerization
Choi EY, Moon SH
2321 - 2326 Toughened electrospun nanofibers from crosslinked elastomer-thermoplastic blends
Fang J, Lin T, Tian W, Sharma A, Wang XG
2327 - 2331 Impact of impregnation with boron compounds on the surface hardness of varnished wood
Ors Y, Atar M, Colakoglu MH
2332 - 2338 DSC study on the effect of cure reagents on the lignin base epoxy cure reaction
Sun H, Sun G, Lv H, Liu Y, Zhao BY, Zhu N, Hui KA
2339 - 2345 Synthesis and characterization of novel biodegradable polymeric prodrugs containing 5-fluorouracil and 4-amino-N-(2-pyrimidinyl) benzene sulfonamide terminal groups
Chang J, Du J, Zheng YB
2346 - 2350 Comparative analysis of the structural parameters and strength properties of polyacrylonitrile fibers containing ceramic nanoadditives
Mikolajczyk T, Bogun M, Rabiej S
2351 - 2356 Development of a bilayer coating to improve the adhesion between stainless steel and in situ-polymerized poly(methyl methacrylate)
Pellice SA, Fasce DP, Williams RJJ
2357 - 2362 Reversible addition-fragmentation chain transfer polymerization of styrene using a novel thiophene dithioester as the reversible addition-fragmentation chain transfer agent
Zhou N, Lu L, Zhu J, Yang XJ, Wang X, Zhu XL, Zhang ZB
2363 - 2369 Preparation and properties of deep dye fibers from poly(ethylene terephthalate)/SiO2 nanocomposites by in situ polymerization
Yang YZ, Gu HC
2370 - 2375 The effect of citrate esters as plasticizers on the thermal and mechanical properties of poly(methyl methacrylate)
Gutierrez-Villarreal MH, Rodriguez-Velazquez J
2376 - 2386 UV-curable hybrid coatings based on vinylfunctionlized siloxane oligorner and acrylated polyester
He JY, Zhou L, Soucek MD, Wollyung KM, Wesdekmiotis C
2387 - 2395 Morphology, thermal, and mechanical properties of polypropylene/polyaniline coated short glass fiber composites
Cruz-Silva R, Romero-Garcia J, Vazquez-Rodriguez S, Angulo-Sanchez JL
2396 - 2406 Cure characteristics and physical properties of ground-rubber-filled natural rubber vulcanizates: Effects of the curina systems of the ground rubber and rubber matrix
Kim SW, Park HY, Lim JC, Jeon IR, Seo KH
2407 - 2415 Effect of zinc oxide nanoparticles as cure activator on the properties of natural rubber and nitrile rubber
Sahoo S, Maiti M, Ganguly A, George JJ, Bhowmick AK
2416 - 2426 Striped-pattern deterioration and morphological analysis of injection moldings comprising polypropylene/ethylene alpha-olefin rubber blends. I. Influence of ultraviolet irradiation
Hirano K, Tamura S, Kanai T
2427 - 2432 Crosslinked chitosan doped with Y-2(CO3)(3) and surface energy and electrorheological properties
Ma Y, Jia YL, Shang YL, Liao FH, Li JR, Zhang SH, Zhang O