Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.105, No.2 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (91 articles)

291 - 296 Preparation and characterization of poly(vinyl chloride)-graft-acrylic acid membrane by electron beam
Liu F, Zhu BK, Xu YY
297 - 301 A kinetic study of novel bimetallic titanocene catalyst for syndiospecific styrene polymerization
Yim JH, Cho KY
302 - 308 Smart polymer recycling: Synthesis of novel rigid polyurethanes using phosphorus-containing oligomers formed by controlled degradation of microporous polyurethane elastomer
Grancharov G, Mitova V, Shenkov S, Topliyska A, Gitsov I, Troev K
309 - 316 Shear and elongational rheology of polyethylenes with different molecular characteristics. I. Shear rheology
Wei X, Collier JR, Petrovan S
317 - 321 Preparation of styrene-maleic acid copolymers and its application in encapsulated pigment red 122 dispersion
Fu SH, Fang KJ
322 - 332 Enhancing the mechanical properties of styrene-butadiene rubber by optimizing the chemical bonding between silanized silica nanofiller and the rubber
Ansarifar A, Wang L, Ellis RJ, Kirtley SP, Riyazuddin N
333 - 340 Flame retardancy and mechanical properties of EVA nanocomposites based on magnesium hydroxide nanoparticles/microcapsulated red phosphorus
Lv JP, Liu WH
341 - 351 Thermal degradation and ageing behavior of microcomposites of natural rubber, carboxylated styrene butadiene rubber latices, and their blends
Stephen R, Siddique AM, Singh F, Kailas L, Jose S, Joseph K, Thomas S
352 - 359 New photochemical approach to cellulose fabric and photoinitiator system
Han S, Lee M
360 - 372 Surface modification of a group of polymers using a low temperature cascade arc torch
Gilliam M, Yu QS
373 - 378 Preparation and characterization of poly(ethylene terephthalate) fabrics treated by blends of cellulose nanocrystals and polyethylene glycol
Li WD, Ding EY
379 - 389 Morphology and nonisothermal crystallization behavior of PP/Novolac blends
Cui LM, Wang SF, Zhang Y, Zhang YX
390 - 397 Mechanical and thermal properties of toughened polypropylene composites
Houshyar S, Shanks RA
398 - 404 Photoinitiated RAFT polymerization in the presence of trithiocarbonate
Ran R, Yu Y, Wan T
405 - 411 Preparation of poly(phthalazinone ether sulfone ketone) hollow fiber membrane for gas separation
Fu HT, Yang DL, Zhang SH, Jian XG
412 - 419 Physicochemical properties of prepared ion-exchangers from cellulose incorporated with different functional group
Nada AMA, Adel AM
420 - 423 Synthesis of formaldehyde polymers from benzene-1,2-diol, phenolic alkane-1,2-diol, and phenolic alkane-1,3-diol as immobilized chelatants for borate anion
Tyman JHP, Payne PB
424 - 428 Surface free energy analysis of poly(vinyl alcohol) films having various molecular parameters
Kim JH, Shin DS, Han MH, Kwon OW, Lee HK, Lee SG, Ghim HD, Park JM, Han SS, Noh SK, Lyoo WS
429 - 434 Preparation and properties of iodine-doped radiopaque natural rubber
Nisha VS, Joseph R
435 - 445 Effect of polymer-clay interaction on solvent transport behavior of fluoroelastomer-clay nanocomposites and prediction of aspect ratio of nanoclay
Maiti M, Bhowmick AK
446 - 452 Thermotropic color changing nanoparticles prepared by encapsulating blue polystyrene particles with a poly-N-isopropylacrylamide gel
Yuan B, Wicks DA
453 - 459 Physical properties of water-blown rigid polyurethane foams from vegetable oil-based polyols
Tu YC, Kiatsimkul P, Suppes G, Hsieh FH
460 - 468 Mechanical properties and processibilty of glass-fiber-, wollastonite-, and fluoro-rubber-reinforced silicone rubber composites
Park ES
469 - 476 Characterization and property correlations of amorphous poly(alpha olefin)
Ha HS, Shin JH, Kim BK
477 - 485 High performance elastomer composites containing ultra high cis polybutadiene with high abrasion and low rolling resistances
Kwag G, Kim P, Han S, Lee S, Choi H, Kim S
486 - 491 Dispersing mechanism of carboxymethyl starch as water-reducing agent
Zhang DF, Ju BZ, Zhang SF, Yang JZ
492 - 499 Effect of cellulase pretreatment of raw and bleached cotton fibers on properties of hydroentangled nonwoven fabrics
Verenich S, Arumugam K, Shim E, Pourdeyhimi B
500 - 509 Polymerization of styrene using bis(beta-ketoamino)nickel(II)/methylaluminoxane catalytic systems
Yu SX, He XH, Chen YW, Liu YM, Hong SG, Wu Q
510 - 514 Synthesis, morphology, component distribution, and mechanical properties of nitrocellulose/gradient poly(ethylene glycol dimethacrylate) semi-IPN material
Xiao ZG, Ying SJ, He WD, Xu FM, Sun P
515 - 520 An investigation on the reinforcing potential of red earth as filler for natural rubber compounds
Osabohien E, Egboh SHO
521 - 526 Copper-based reverse ATRP process for the controlled radical polymerization of methyl methacrylate
Pan K, Jiang L, Zhang J, Dan Y
527 - 532 Absorption and release of zinc and copper ions by chitosan fibers
Qin YM, Zhu CJ, Chen J, Liang D, Wo GF
533 - 538 Copolymers of 3,3,3-trifluoropropene and vinyl acetate: Synthesis, characterization, and hydrolysis
Zhang SX, Xu AH, Geng B, Xia PD, Chu SZ, Liu M
539 - 546 Preparation and characterization of a novel pH-, thermo-, and ionic strength-responsive hydrogels based on xanthan gum-poly(aspartic acid)
Yang J, Fang L, Wang F, Tan TW
547 - 551 Thermogravimetric analysis of chitosan
Hong PZ, Li SD, Ou CY, Li CP, Yang L, Zhang CH
552 - 561 Preparation of nanoparticles composed of chitosan and its derivatives as delivery systems for macromolecules
Sun Y, Wan AJ
562 - 569 Synthesis of high molecular weight polyoxyethylene with a quaternary catalyst and study of its conductive blends with poly(2-vinyl pyridine)
Xie HQ, Zhang JH, Cui MH, Xie D
570 - 575 Esterification reaction between acetylated wood and trialkoxysilane coupling agents
Ozmen N, Cetin NS, Tingaut P, Sebe G
576 - 584 Doping effect of organic sulphonic acids on the solid-state synthesized polyaniline
Abdiryim T, Jamal R, Nurulla I
585 - 592 Observation for mechanical property variations of single polymer particles
Kim DO, Jin JH, Shon WI, Oh SH
593 - 601 Synthesis and characterization of a poly(ethylene glycol) prepolymer to be applied as a bioadhesive
Ferreira P, Coelho JFJ, Pereira R, Silva AFM, Gil MH
602 - 608 Friction and wear mechanisms of PA66/PPS blend reinforced with carbon fiber
Chen ZB, Liu XJ, Lu RG, Li TS
609 - 614 Development of light-induced functionalized asymmetric polysulfone membranes
Yogesh, Paul P, Basu S, Bhattacharya A
615 - 622 Crystallization behavior of poly(epsilon-caprolactone) in poly(epsilon-caprolactone) and poly(vinyl methyl ether) mixtures
Meng YF, Li HF, Huo H, Jiang SC, An LJ
623 - 628 Recoverable surface modification using dendritically fluorocarbon-functionalized poly(methyl methacrylate)
Thompson RL, Narrainen AP, Eggleston SM, Ansari IA, Hutchings LR, Clarke N
629 - 640 Poly(epsilon-caprolactone)-functionalized carbon nanofibers by surface-initiated ring-opening polymerization
Wang K, Li WW, Gao C
641 - 646 Free volume properties of thermoplastic polyurethane/polymethylmethacrylate blends: Evidence of interchain interaction
Patricio PSO, Silva GG, Machado JC
647 - 655 Composites of polymeric gels and magnetic nanoparticles: Preparation and drug release behavior
Francois NJ, Allo S, Jacobo SE, Daraio ME
656 - 663 Physicochemical properties and fracture behavior of soy-based resin
Shabeer A, Sundararaman S, Chandrashekhara K, Dharani LR
664 - 672 Cationic cyclization of purified natural rubber in latex form with a trimethylsilyl triflate as a novel catalyst
Riyajan SA, Liaw DJ, Tanaka Y, Sakdapipanich JT
673 - 679 Hexamethylene diisocyanate crosslinking 2-hydroxypropyltrimethyl ammonium chloride chitosan/poly(acrylonitrile) composite nanofiltration membrane
Huang RH, Chen GH, Sun MK, Gao CJ
680 - 684 Peel and shear strength of pressure-sensitive adhesives prepared from epoxidized natural rubber
Poh BT, Kwo HK
685 - 696 Synthesis and properties of flame-retardant epoxy resins based on DOPO and one of its analog DPPO
Schafer A, Seibold S, Lohstroh W, Walter O, Doring M
697 - 705 Sol-gel-derived alumina/polyvinylpyrrolidone hybrid nanocomposite film on metal for corrosion resistance
Jing CB, Hou JX
706 - 709 Preparation and characterization of castor oil-based polyurethane/poly(o-methoxyaniline) blend film
Alves WF, Kanda DHF, Malmonge LF, Malmonge JA, Mattoso LHC
710 - 717 Influence of annealing on conduction of high-density polyethylene/carbon black composite
Song YH, Zheng Q
718 - 725 Controlled release study of carbaryl insecticide from calcium alginate and nickel alginate hydrogel beads
Isiklan N
726 - 732 Application of polycarboxylic acid sodium salt in the dyeing of cotton fabric with reactive dyes
Guan Y, Zheng QK, Mao YH, Gui MS, Fu HB
733 - 738 Infrared spectroscopic monitoring of urea addition to oriented strandboard resins
So CL, Eberhardt TL, Hsu E, Via BK, Hse CY
739 - 748 Morphology, nonisothermal crystallization behavior, and kinetics of poly(phenylene sulfide)/polycarbonate blend
Wu DF, Zhang YS, Zhang M, Wu LF
749 - 756 Synthesis, characterization, and applications of novel additives of polysiloxane containing N,N'-bis(diphenylsilyl)tetraphenylcyclodisilazane
Zhu YP, Guo L, Zhang ZJ, Xie ZM, Xu CH
757 - 764 Birefringent characterization of necking phenomenon along cold-drawn polypropylene fibers. I. Offline drawing
El-Dessouky HM
765 - 770 Segment self-orientational behavior in shape memory polymer thin films probed by Raman spectroscopy
Liem H, Yeung LY
771 - 776 Synthesis and characterization of poly(epsilon-caprolactone)-b-poly(ethylene glycol) block copolymers prepared by a salicylaldimine-aluminum complex
Du ZX, Xu JT, Yang Y, Fan ZQ
777 - 782 Synthesis of boron-containing coupling agents and its effect on the interfacial bonding of fluoropolymer/TATB composite
Li F, Ye L, Nie FD, Liu YG
783 - 789 Mechanical property investigation of single polymer particles with the variation of molecular structure of crosslinking monomer
Kim DO, Jin JH
790 - 802 Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay-polycaprolactam nanocomposites
Sikdar D, Katti D, Katti K, Mohanty B
803 - 808 Performance of the light emitting diodes versus conventional light sources in the UV light cured formulations
Anyaogu KC, Ermoshkin AA, Neckers DC, Mejiritski A, Grinevich O, Fedorov AV
809 - 820 Preparation and properties of poly(imide siloxane) segmented copolymer/silica hybrid nanocomposites
Liaw WC, Chen KP
821 - 826 Preparation and characterization of a novel composite based on hyperbranched polysilane and fullerene
Yu J, Zhang ZH, Ni Y, Lu YB, Xiong YQ, Xu WJ
827 - 837 Melting and degradation of nylon-11 particles during HVOF combustion spraying
Ivosevic M, Cairncross RA, Knight R
838 - 845 Proton conductivity and methanol permeability of sulfonated poly(vinyl alcohol) membranes modified by using sulfoacetic acid and poly(acrylic acid)
Seeponkai N, Wootthikanokkhan J
846 - 852 Thermal oxidation of metallocene-catalyzed poly(ethylene octene) by a rheological method
Yang K, Yu W, Zhou CX
853 - 858 Fluoroquinolon-type antibiotic treatment of PAN and cationic-dyeable PET fibers for infection resistant materials
Choi HM
859 - 864 Effect of cationization reagents on the matrix-assisted laser desorption/ionization time-of-flight mass spectrum of Chinese gallotannins
Xiang P, Lin Y, Lin P, Xiang C, Yang ZW, Lu ZM
865 - 876 Vulcanization of polychloroprene rubber. I. A revised cationic mechanism for ZnO crosslinking
Desai H, Hendrikse KG, Woolard CD
877 - 884 Surface-initiated ring-opening polymerization of epsilon-caprolactone from the surface of PP film
Sui Y, Zhao JB, Gan SH, Zhao HC, Yang WT
885 - 892 Peroxide crosslinking of a styrene-free unsaturated polyester
Mironi-Harpaz I, Narkis M, Siegmann A
893 - 898 Investigation of MWNTs/PBO nanocomposite polymerization mechanism with model compound
Li X, Huang YD, Cao HL, Liu L
899 - 902 Microstructural evaluation of poly(vinyl alcohol)-based hydrogels obtained by freezing-thawing technique: Thermal analysis and positron annihilation
Paranhos CM, Soares BG, Oliveira RN, Pessan LA, de Freitas DS, Windmoller D, Machado JC
903 - 907 Gas sorption in semicrystalline rubbery polymers revisited
Lopez-Gonzalez M, Compan V, Riande E
908 - 914 Cure characteristics, morphology, and mechanical properties of ethylene-propylene-diene-monomer rubber/acrylonitrile butadiene rubber blends
Manoj KC, Unnikrishnan G
915 - 927 Amphiphilic block copolymers based on methoxy poly(ethylene glycol) and either crystalline or amorphous poly(caprolactone-b-lactide): Synthesis, solid-state and aqueous solution characterizations
Zhang J, Wang LQ, Wang HJ, Tu KH, Liu L
928 - 934 Preparation and characterization of HAP/carboxymethyl chitosan nanocomposites
Sreedhar B, Aparna Y, Sairam M, Hebalkar N
935 - 943 Mechanical characterization of polyhedral oligomeric silsesquioxane/polypropylene blends
Baldi F, Bignotti F, Fina A, Tabuani D, Ricco T
944 - 950 Novel gd-substituted LiNi ferrite/polyaniline composite prepared by in situ polymerization
Jiang J, Li LC, Xu F
951 - 963 Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments
Biemond GJE, Feijen J, Gaymans RJ
964 - 972 Preparation and characterization of poly(D,L-lactic-co-glycolic acid) nanoparticles containing 3-(benzoxazol-2-yl)-7-(N,N-diethyl amino) chromen-2-one
Gomes AJ, Assuncao RMN, Rodrigues G, Espreafico EM, Machado AED
973 - 977 High resolution NMR study of tropical fruit seed starches
Costa PDM, Tavares MIB, Bathista ALBS, da Silva EO, Nogueira JS
978 - 985 Isothermal crystallization of HDPE/octamethyl polyhedral oligomeric silsesquioxane nanocomposites: Role of POSS as a nanofiller
Joshi M, Butola BS
986 - 996 Thermal and mechanical properties of polystyrene/poly(acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-styr ene) (AES) blends prepared by the in situ polymerization of styrene
Lourenco E, Felisberti MI