Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.102, No.5 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (130 articles)

4085 - 4091 Properties and morphology of bioceramics/poly(D,L-lactide) composites modified by in situ compatibilizing extrusion
Liu F, Jin Y, Lin XD, Jia DM
4092 - 4100 Effect of spin finish on fiber/binder adhesion in chemically bonded nonwovens
Fourdrin S, Rochery M, Gengembre L, Rumeau P, Lewandowski M, Ferreira M, Bourbigot S
4101 - 4110 Light-colored fluorinated polyimides based on 2,5-bis(4-amino-2-trifluoromethylphenoxy)biphenyl and various aromatic dianhydrides
Yang CP, Su YY, Chen YC
4111 - 4115 Thermal and physical properties of allyl PPO and its composite
Wang LH, Xu QY, Chen DH, Yuan YH, Tang WJ, Wang LL
4116 - 4120 ESR study of hydroxyl alkoxyamine (HMPAP) in DMF and tert-butylbenzene
Yin MZ, Krause T, Habicher WD
4121 - 4126 Pyrrole chemical polymerization on textiles: Kinetics and operating conditions
Ferrero F, Napoli L, Tonin C, Varesano A
4127 - 4135 Synthesis and properties of organosoluble polyimides derived from bis(4-amino-3, 5-dimethyl phenyl) halo phenyl methane and various dianhydrides
Hariharan R, Sarojadevi M
4136 - 4143 Application of DMEU/SiO2 gel solution in the antiwrinkle finishing of cotton fabrics
Huang KS, Nien YH, Hsiao KC, Chang YS
4144 - 4148 Percolation threshold of electrically conductive master batch for polyester fibers application
Jin X, Xiao CF, An SL, Jia GX
4149 - 4156 Thermal degradation kinetics of rigid polyurethane foams blown with water
Li XB, Cao HB, Zhang Y
4157 - 4164 Dynamic mechanical properties in blends of poly(styrene-b-isoprene-b-styrene) with aromatic hydrocarbon resin
Wu CY, Wu GZ, Wu CF
4165 - 4170 Interfacial studies on the surface modified aramid fiber reinforced epoxy composites
Wu J, Cheng XH
4171 - 4176 The effect of orientation of various phenols on the degradation kinetics of blends of resole and epoxy
Srivastava K, Kaushik MK, Srivastava D, Tripathi SK
4177 - 4184 Microwave-assisted preparation of temperature sensitive poly(N-isopropylacrylamide) hydrogels in poly(ethylene oxide)-600
Shi SH, Liu LJ
4185 - 4193 Effect of immobilized neutral protease on the preparation and physicochemical properties of low molecular weight chitosan and chito-oligomers
Li J, Du YM, Liang HB, Yao PJ, Wei YA
4194 - 4206 Recycling of NR based cured latex material reclaimed with 2,2'-dibenzamidodiphenyldisulphide in a truck tire tread compound
Rajan VV, Dierkes WK, Joseph R, Noordermeer JWM
4207 - 4212 Blended resins based on a new prop argyl-functional resin: Synthesis, cure, and thermal properties
Liu F, Li WW, Wei LH, Zhao T
4213 - 4221 Synthesis and characterization of dextran hydrogels prepared with chlor- and nitrogen-containing crosslinkers
Imren D, Gumusderelioglu M, Guner A
4222 - 4227 Rheological behavior of polyester blend and mechanical properties of the polypropylene-polyester blend fibers
Marcincin A, Kormendy E, Hricova M, Rusnak A, Aneja AP
4228 - 4237 Modeling the chemorheological behavior of epoxy/liquid aromatic diamine for resin transfer molding applications
Naffakh M, Dumon M, Gerard JF
4238 - 4244 Copolymers of acrylic acid with 2-acryloyloxyethyl 2,4-dichlorophenoxyacetate: Synthesis and herbicide release
Fernandez-Garcia M, Sanchez-Chaves M
4245 - 4253 Controlled release formulations of carbaryl based on copper alginate, barium alginate, and alginic acid beads
Sanli O, Isiklan N
4254 - 4257 Free-radical copolymerization kinetics of acrylonitrile and methyl acrylate in [BMIM]BF4
Li D, Zhang YM, Wang HP, Tang JZ, Wang B
4258 - 4263 Structure of P(VDF-TrFE) (80/20) copolymers under electron irradiation and recrystallization
Li W, Jiang LM, Zhu YJ, Wang J
4264 - 4268 Shrinkage and re-expansion of extruded starch acetate foams
Zhou JH, Hanna M
4269 - 4275 Characterization of (PEO)LiClO4-Li1.3Al0.3Ti1.7(PO4)(3) composite polymer electrolytes with different molecular weights of PEO
Wang YJ, Pan Y, Wang L, Pang MJ, Chen LS
4276 - 4283 Synthesis and characterization of poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole) copolymer beads for heavy-metal removal
Uzun L, Kara A, Tuzmen N, Karabakan A, Besirli N, Denizli A
4284 - 4290 Curing behavior and thermal mechanical properties of cyanate ester blends
Koh HCY, Dai J, Tan E
4291 - 4303 Accelerated aging versus realistic aging in aerospace composite materials. I. The chemistry of thermal aging in a low-temperature-cure epoxy composite
Dao B, Hodgkin J, Krstina J, Mardel J, Tian W
4304 - 4313 Preparation and characterization of polystyrene-poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials
Ibrahim K, Salminen A, Holappa S, Kataja K, Lampinen H, Lofgren B, Laine J, Seppala J
4314 - 4320 Novel organic modification of montmorillonite in hydrocarbon solvent using ionic liquid-type surfactant for the preparation of polyolefin-clay nanocomposites
Ding YS, Guo CY, Dong JY, Wang ZG
4321 - 4327 Synthesis and properties of novel deep red-emitting copolymers based on a poly(p-phenylenevinylene) derivative
Li XZ, Zeng WJ, Xia YJ, Yang W, Cao Y
4328 - 4340 Kinetics study of radiation-grafting of acrylic acid, acrylonitrile, and their mixture onto wool fabric
El-Gendy EH, El-Shanshoury IA
4341 - 4347 Adsorption behavior and effectiveness of poly(N,N-dimethylacrylamide-co-Ca 2-acrylamido-2-methylpropanesulfonate) as cement fluid loss additive in the presence of acetone-formaldehyde-sulfite dispersant
Plank J, Brandl A, Zhai YN, Franke A
4348 - 4357 Preparation of magnetic poly(glycidyl methacrylate) microspheres by emulsion polymerization in the presence of sterically stabilized iron oxide nanoparticles
Horak D, Chekina N
4358 - 4364 Partial substitution of cellulose by ring-opening esterification of cyclic esters in a homogeneous system
Mayumi A, Kitaoka T, Wariishi H
4365 - 4371 Rheology of silicon carbide/vinyl ester nanocomposites
Yong V, Hahn HT
4372 - 4377 Modification of preparation method for polymer inclusion membrane (PIM) to produce hollow fiber PIM
Kusumocahyo SP, Kanamori T, Iwatsubo T, Sumaru K, Shinbo T, Matsuyama H, Teramoto M
4378 - 4382 Preparation and deodorizing performance of a novel air-purifying material
Yao YY, Chen WX, Lu SS
4383 - 4393 Self-curable system of an aqueous-based polyurethane dispersion via a ring-opening reaction of azetidine end groups
Wang SC, Chen PC, Yeh JT, Chen KN
4394 - 4403 Follow-up of the course of the anionic ring-opening polymerization of lactams onto an isocyanate-bearing polymer backbone in the melt
Hu GH, Li HX, Feng LF
4404 - 4410 Enhanced performance in organic light-emitting diodes with copolymers containing both tris(8-hydroxyquinoline) aluminum and 8-hydroxyquinoline lithium groups
Du NY, Tian RY, Peng JB, Mei QB, Lu MG
4411 - 4418 Boric acid binding studies with diol containing polyethylenimines as determined by B-11 NMR spectroscopy
Labouriau A, Smith BF, Khalsa GRK, Robison TW
4419 - 4424 Effect of composition on aqueous polyurethane dispersions derived from polycarbonatediols
Lee DK, Tsai HB, Tsai RS
4425 - 4429 Grafting of maleic anhydride onto styrene-butadiene-styrene triblock copolymer using supercritical CO2 as a swelling agent
Li CS, Zhang SX, Zheng A, Kong XZ, Geng B
4430 - 4439 Rheological study of the curing kinetics of epoxy-phenol novolac resin
Auad ML, Nutt SR, Stefani PM, Aranguren MI
4440 - 4446 Study of viscosity abnormality of PS/toluene solution in extremely dilute concentration regime
Du DX, Zuo J, An YL, Zhou L, Liu Y
4447 - 4459 Green strength enhancement in BIIR/olefin copolymer compounds
Tsou AH, Duvdevani I, Datta S
4460 - 4467 Mechanical and morphological properties of recycled high-density polyethylene, filled with calcium carbonate and fly ash
Atikler U, Basalp D, Tihminlioglu F
4468 - 4477 Grafting of N-carbamyl maleamic acid onto a styrene-butadiene-styrene copolymer
Lassalle VL, Failla MD, Valles EM
4478 - 4483 Viscose fiber/polyamide 12 composites: Novel gas-phase method for the modification of cellulose fibers with an aminosilane coupling agent
Paunikallio T, Suvanto M, Pakkanen TT
4484 - 4487 Dynamic mechanical and rheological behavior of fluoroelastomer-organoclay nanocomposites obtained from different preparation methods
Valsecchi R, Vigano M, Levi M, Turri S
4488 - 4492 Polymerization of monomers initiated by silyl centers in SiO deposits prepared by pulsed laser ablation
Drinek V, Vacek K, Yuzhakov G, Brus J
4493 - 4499 Growth control and long-range self-assembly of poly(methyl methacrylate) nanospheres
D'Amato R, Venditti I, Russo MV, Falconieri M
4500 - 4505 Electrochromic properties and electrochromic device application of copolymer of N-(4-(3-thienyl methylene)-oxycarbonylphenyl)maleimide with thiophene
Ak M, Camurlu P, Yilmaz F, Cianga L, Yagci Y, Toppare L
4506 - 4513 Weathering, water absorption, and durability of silicon, acetylated, and heat-treated wood
Temiz A, Terziev N, Jacobsen B, Eikenes M
4514 - 4522 Rice bran-filled biodegradable low-density polyethylene films: Development and characterization for packaging applications
George J, Kumar R, Jayaprahash C, Ramakrishna A, Sabapathy SN, Bawa AS
4523 - 4527 High-resolution measurements of water permeability and solubility in microelectronic-casing made of a hydrophobic polymeric composite
Zimrin T, Haruvy YF, Margel S
4528 - 4534 Alginate-coated chitosan membrane for guided tissue regeneration
Chen TW, Chang SJ, Niu GCC, Hsu YT, Kuo SM
4535 - 4545 Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology
Chang JH, Mun MK, Kim JC
4546 - 4553 Effect of formulation variables on the prediction of release from microparticles with experimental design
Luzardo-Alvarez A, Almeida-Prieto S, Fraga-Lopez F, Otero-Espinar F, Rodriguez-Nunez E, Martinez-Ageitos J, Blanco-Mendez J
4554 - 4564 Polyester composites reinforced with noncrimp stitched carbon fabrics: Mechanical characterization of composites and investigation on the interaction between polyester and carbon fiber
Cecen V, Sarikanat M, Seki Y, Govsa T, Yildiz H, Tavman IH
4565 - 4572 Preparation of novel acrylate-based liquid crystalline polymers and the photoinduced alignment behavior of their films
Zhu J, Wu LP, Zhang YY, Jin X, He SJ, Shi KY, Guo XZ, Du ZJ, Zhang BL
4573 - 4576 Improved pharmacokinetics and stability properties of catalase by chemical glycosidation with end-group activated dextran
Villalonga R, Valdivia A, Perez Y, Chongo B
4577 - 4583 Asymmetric membranes fabricated from poly(acrylonitrile-co-N-vinyl-2-pyrrolidone)s with excellent biocompatibility
Wan LS, Xu ZK, Huang XJ
4584 - 4588 One-pot synthesis of polyetherimides from bis(chlorophthalimide) and dichlorodiphenylsulfone in diphenylsulfone
Shang ZP, Lu CL, Zhao JY, Yan JL, Ding MX, Gao LX
4589 - 4594 Synthesis and photopolymerization of ethylene glycol 3-morpholine-propionate methacrylate for potential dental composite application
Wu GQ, Shi SQ, Xiao P, Nie J
4595 - 4600 Side-chain liquid-crystalline polymers with a limonene-co-methyl methacrylate main chain: Synthesis and characterization of polymers with phenyl benzoate mesogenic groups
Mishra G, Srivastava AK
4601 - 4605 Blend films of O-carboxymethyl chitosan and cellulose in N-methylmorpholine-N-oxide monohydrate
Zhuang XP, Liu XF
4606 - 4615 Comparing reinforcement strategies for epoxy networks using reactive and non-reactive fortifiers
Calzia KJ, Forcum A, Lesser AJ
4616 - 4622 Miniemulsion and conventional emulsion copolymerization of styrene and butadiene: Effect of process on gel content
Li D, Sudol ED, El-Aasser MS
4623 - 4629 Chemiluminescence of isotactic polypropylene induced by photo-oxidative degradation and natural weathering
Jipa S, Setnescu R, Zaharescu T, Setnescu T, Kaci M, Touati N
4630 - 4636 Studies on interfacial adhesion, tensile and thermal characteristics in blends of polystyrene/novalac resin
Konar BB, Ray SK, Konar PB
4637 - 4645 Removal of copper ions from water of boilers by a modified natural based, corncobs
Billon L, Meric V, Castetbon A, Francois J, Desbrieres J
4646 - 4651 Effect of the interface with solid on the interfacial region in the blends of linear polymers formed in situ
Lipatov YS, Kosyanchuk LF, Yarovaya NV
4652 - 4658 Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents
Cheng S, Tang H, Yan H
4659 - 4664 Preparation and characterization of acrylic resin/titania hybrid nanocomposite coatings by photopolymerization and sol-gel process
Sangermano M, Amerio E, Priola A, Di Gianni A, Voit B
4665 - 4671 Swelling of pH-sensitive chitosan-poly(vinyl alcohol) hydrogels
Gunasekaran S, Wang T, Chai CX
4672 - 4681 Influence of curing agent and compatibilizer on the physicomechanical properties of polypropylene/nitrile butadiene rubber blends investigated by positron annihilation lifetime technique
Soares BG, Almeida MSM, Urs MVD, Kumaraswamy GN, Ranganathaiah C, Siddaramaiah, Mauler R
4682 - 4689 Polymerization of halogenated anilines by plasma
Olayo MG, Enriquez MA, Cruz GJ, Morales J, Olayo R
4690 - 4695 Development of conductive cotton fabrics for heating devices
Bhat NV, Seshadri DT, Nate MM, Gore AV
4696 - 4706 Aspects of foaming a glass-reinforced polypropylene with chemical blowing agents
Thompson MR, Qin X, Zhang G, Hrymak AN
4707 - 4711 Influence of 1,2-unit contents on retraction behaviors of SBR vulcanizates
Choi SS, Cho G
4712 - 4719 Thermal, morphological, and mechanical characteristics of polypropylene/polybutylene terephthalate blends with a liquid crystalline polymer or ionomer
Zhang BY, Sun QJ, Li QY, Wang Y
4720 - 4727 Effect of partial replacement of di(2-ethyl hexyl)phthalate, by a polymeric plasticizer, on the permeability and leaching properties of poly(vinyl chloride)
Sunny MC, Ramesh P, George KE
4728 - 4733 Influence of thermal aging on the electrical properties of poly(vinyl chloride)
Nedjar M, Beroual A, Boubakeur A
4734 - 4740 High thermal conductivity epoxy molding compound filled with a combustion synthesized AIN powder
Hsieh CY, Chung SL
4741 - 4748 Structural effect of phenalkamines on adhesive viscoelastic and thermal properties of epoxy networks
Pathak SK, Rao BS
4749 - 4758 Structure and dynamics of polyethylene/clay films
La Mantia FP, Dintcheva NT, Filippone G, Acierno D
4759 - 4763 Effect of the delignification of wood fibers on the mechanical properties of wood fiber-polypropylene composites
Karimi A, Nazari S, Ghasemi I, Tajvidi M, Ebrahimi G
4764 - 4774 Multiwavelength interferometry and competing optical methods for the thermal probing of thin polymeric films
Vourdas N, Karadimos G, Goustouridis D, Gogolides E, Boudouvis AG, Tortai JH, Beltsios K, Raptis I
4775 - 4779 Isothermal and nonisothermal melt crystallization kinetics of a novel poly(aryl ether ketone ether ketone ketone) containing a meta-phenyl linkage
Qiu ZB, Yang WT
4780 - 4790 Biologically active polymers. IV. Synthesis and antimicrobial activity of tartaric acid polyamides
Kenawy ER, Abdel-Hay FI, Shahada L, El-Shanshoury AERR, El-Newehy MH
4791 - 4800 Synthesis of macroreticular copolymer beads having various phenolic derivatives immobilized via different bond and their radical scavenging activity
Maeda S, Nonaka T, Ogata T, Kurihara S
4801 - 4808 Studies on fly-ash-filled natural rubber modified with cardanol derivatives: Processability, mechanical properties, fracture morphology, and thermal decomposition characteristics
Menon ARR, Sonia TA, Sudha JD
4809 - 4813 Effect of aging on synthesis of graft copolymer of EPDM and styrene (EPDM-g-PS)
Wonglert C, Thongyai S, Praserthdam P
4814 - 4822 Effect of applied stress on the alkaline hydrolysis of poly(ethylene terephthalate) at 40 degrees C: Relevance to medical textiles
Rahman M, East GC
4823 - 4830 Effect of different carbon fillers on the properties of PP composites: Comparison of carbon black with multiwalled carbon nanotubes
Zhou Z, Wang SF, Zhang Y, Zhang YX
4831 - 4834 Preparation of high-molecular-weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4'-azobis(4-cyanovaleric acid)
Lyoo WS, Song DH, Lee WC, Han SS, Noh SK
4835 - 4841 A comparative study of cardanol and aromatic oil as plasticizers for carbon-black-filled natural rubber
Alexander M, Thachil ET
4842 - 4849 Effect of quasi-nanometer zirconium carbide on the physical characterization of zirconium carbide/polyurethane composite films irradiated under ultraviolet light
Tasi HA, Suen MC, Chen CC
4850 - 4855 Chemical modification of calcium alginate gel beads for controlling the release of insect repellent N,N-diethyl-3-methylbenzamide
Xiao CM, Zhou M, Lin XD, Li RQ
4856 - 4869 Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties
Huda MS, Drzal LT, Misra M, Mohanty AK
4870 - 4877 Electrical behavior of PET films coated with nanostructured organic-inorganic hybrids
Saccani A, Toselli M, Messori M, Fabbri P, Pilati F
4878 - 4885 Optimization of synthetic conditions of a novel collagen-based superabsorbent hydrogel by Taguchi method and investigation of its metal ions adsorption
Pourjavadi A, Salimi H, Amini-Fazl MS, Kurdtabar M, Amini-Fazl AR
4886 - 4896 Retention of activity of urease immobilized on grafted polymer films
Yamada K, Iizawa Y, Yamada J, Hirata M
4897 - 4907 Waste natural gum as a multifunctional additive in rubber
Guhathakurta S, Anandhan S, Singha NK, Chattopadhyay RN, Bhowmick AK
4908 - 4914 Synthesis and characterization of functional copolymers of citronellol and acrylamide
Srivastava AK, Pandey P, Mishra G
4915 - 4920 Microencapsulation of water-soluble flame retardant containing organophosphorus and its application on fabric
Lin M, Yang Y, Xi P, Chen SL
4921 - 4927 Preparation and properties of polyethylene-clay nanocomposites by an in situ graft method
Qi RR, Jin X, Zhou CX
4928 - 4936 Characterization of the biocide polyhexamethylene biguanide by matrix-assisted laser desorption ionization time-of-flight mass spectrometry
O'Malley LP, Hassan KZ, Brittan H, Johnson N, Collins AN
4937 - 4942 Electrorheological properties of chemically modified chitosan suspension with various functional pendants
Ko YG, Choi US
4943 - 4951 Structure and properties of polypropylene composites filled with magnesium hydroxide
Chen XL, Yu J, Guo SY
4952 - 4957 Impacts of impregnation with boron compounds on surface roughness of woods and varnished surfaces
Ors Y, Atar M, Keskin H, Colakoglu MH
4958 - 4962 Synthesis and characterization of butan-1-of modified toluene diisocyanate trimer
Jin C, Lu J, Li WS, Zhou L, Huang QM, Yang XH
4963 - 4970 Aluminosilicate-filled composites of PVA-PVP - An improved biodegradable polymeric material
Saha N, Ali SKA, Kar S, Saha P, Banthia AK
4971 - 4977 Studies on grafting of acrylic acid onto polypropylene melt-blown nonwovens induced by electron-beam preirradiation
Cheng BW, Jiao XN, Kang WM
4978 - 4982 A novel flame retardant of spirocyclic pentaerythritol bisphosphorate for epoxy resins
Chen GH, Yang B, Wang YZ
4983 - 4988 Properties and morphology of poly(L-lactide)/clay composites according to the clay modification
Shim JH, Kim ES, Joo JH, Yoon JS
4989 - 4995 Synthesis, characterization, and thermal behavior study of methyl methacrylate polymers containing 4-carbazole substitutes
Babazadeh M
4996 - 5006 Preparation and characterization of polyurethane microcapsules containing n-octadecane with styrene-maleic anhydride as a surfactant by interfacial polycondensation
Su JF, Wang LX, Ren L, Huang Z, Meng XW
5007 - 5017 Synthesis of poly(vinyl butyral)s in homogeneous phase and their thermal properties
Fernandez MD, Fernandez MJ, Hoces P
5018 - 5027 Preparation of uniform poly(glycidyl methacrylate) porous microspheres by membrane emulsification-polymerization technology
Wang RW, Zhang Y, Ma GG, Su ZG
5028 - 5038 The use of experimental design to study the responses of continuous devulcanization processes
Sutanto P, Picchioni F, Janssen LPBM
5039 - 5049 Treatment of poly(styrene-co-methacrylic acid)/poly(4-vinylpyridine) blends in solution under liquid-liquid phase-separation conditions. A new method for phase-separation data attainment from viscosity measurements
Torrens F, Soria V, Monzo IS, Abad C, Campos A
5050 - 5056 Influence of alkali treatment on the fine structure and morphology of bamboo fibers
Das M, Chakraborty D
5057 - 5061 Performance evaluation of silane crosslinking of metallocene-based polyethylene-octene elastomer
Zhang GQ, Wang GL, Zhang J, Wei P, Jiang PK
5062 - 5071 Synthesis and characterization of new flame-retardant poly(amide-imide)s containing phosphine oxide and hydantoin moieties in the main chain
Faghihi K
5072 - 5082 Stabilization of epidermal growth factor on thermal and proteolytic degradation by conjugating with low molecular weight chitosan
Chung KH, Park SH, Kim MK, Dal Park H, Son TI
5083 - 5084 Controlled release of bovine serum albumin using MPEG-PCL diblock copolymers as implantable protein carriers (vol 102, pg 1561, 2006)
Kim MS, Seo KS, Hyun H, Jeong SC, Seo SM, Lee JW, Lee B, Khang G, Lee HB