화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.102, No.4 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (126 articles)

3083 - 3094 Role of anionic and nonionic surfactants on the control of particle size and latex colloidal stability in the seeded emulsion polymerization of butyl methacrylate
Castelvetro V, De Vita C, Giannini G, Giaiacopi S
3095 - 3101 Synthesis of unsaturated polyphosphoester as a potential injectable tissue engineering scaffold materials
Qiu JJ, Liu CM, Hu F, Guo XD, Zheng QX
3102 - 3110 Influence of adding mesocarbon microbeads into C/C composites on microstructure and properties during carbonization
Hu HL, Ko TH, Kuo WS, Chen ST
3111 - 3117 Some insight into hydrolytic scission mechanisms in bioerodible polyesters
Alexis F, Venkatraman S, Rath SK, Gan LH
3118 - 3122 Synthesis of two-end-functionalized copolymer of styrene and methyl methacrylate via living radical polymerization
Cai J, Xu L, Mao ZQ, Chen ZJ, Liu Y, Jiang XQ, Cheng RS
3123 - 3126 Surface relief gratings on azo polymer films through reversible photoisomerization by the irradiation of a monochromatic light
Alam MZ, Ohmachi T, Ogata T, Nonaka T, Kurihara S
3127 - 3133 Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend
Huang GS, He XR, Wu JR, Pan QY, Zhen J, Hong Z
3134 - 3143 Effect of coal filler on the properties of soy protein plastics
Wang GH, Zhou AN, Hu MB
3144 - 3148 Adjustable temperature sensor with double thermoresponsiveness based on the aggregation property of binary diblock copolymers
Wu K, Shi LQ, Zhang WQ, An YL, Zhu XX
3149 - 3157 A new and simple way of preparing polycation-grafted fibrous cellulose
Roche P
3158 - 3167 Thermal and dynamic mechanical characterization of polyurethane-urea-imide coatings
Mishra AK, Chattopadhyay DK, Sreedhar B, Raju KVSN
3168 - 3180 Cure kinetics and rheology characterization of soy-based epoxy resin system
Liang G, Chandrashekhara K
3181 - 3185 Study of piezo-damping properties of CPE/ZKF/VGCF composites
Ding XB, Yan X
3186 - 3194 Characterization of mold fouling during elastomer injection molding
Hornsby PR, Singh I, Daley JR, Firth J
3195 - 3200 Studies on blends of polychloroprene and polybutadiene rubber containing phosphorylated cardanol prepolymer: Melt rheology, cure characteristics, and mechanical properties
Menon ARR, Visconte LLY
3201 - 3211 Development of dispersed phase size and its dependence on processing parameters
Chen X, Xu J, Guo BH
3212 - 3220 Supercritical carbon dioxide-assisted dispersion of sodium benzoate in polypropylene and crystallization behavior of the resulting polypropylene
Li B, Hu GH, Cao GP, Liu T, Zhao L, Yuan WK
3221 - 3232 Accelerated aging versus realistic aging in aerospace composite materials. II. Chemistry of thermal aging in a structural composite
Dao B, Hodgkin J, Krstina J, Mardel J, Tian W
3233 - 3239 Copolymerization of n-butylacrylate with styrene by a novel photoinitiator, 1-(bromoacetyl)pyrene
Mishra A, Daswal S
3240 - 3245 Use of radiation grafting of polyethylene-coated polypropylene nonwoven fabric by acrylamide for the removal of heavy metal ions from wastewaters
Ibrahim AM, El-Salmawi KM, El-Naggar AA
3246 - 3254 Structure and mechanical properties of poly(trimethylene terephthalate)/poly(hydroxy ether of bisphenol A) blends
Gonzalez I, Eguiazabal JI, Nazabal J
3255 - 3258 Degradation of chitosan and chemically modified chitosan by viscosity measurements
Agnihotri SA, Kulkarni VD, Kulkarni AR, Aminabhavi TM
3259 - 3265 Effect of compatibilizer and silane coupling agent on physical properties of ethylene vinyl acetate copolymer/ethylene-1-butene copolymer/clay nanocomposite foams
Kim DW, Park KW, Chowdhury SR, Kim GH
3266 - 3272 Barrier properties for short-fiber-reinforced epoxy foams
Alonso MV, Auad ML, Sorathia U, Marcovich NE, Nutt SR
3273 - 3276 Red emission from Eu3+: PVA polymer film
Raju GSR, Buddhudu S, Rajulu AV
3277 - 3285 Preparation and characterization of organoclay-rubber nanocomposites via a new route with skim natural rubber latex
Alex R, Nah C
3286 - 3292 Structural modification and characterization of lignosulfonate by a reaction in an alkaline medium for its incorporation into phenolic resins
El Mansouri NE, Farriol X, Salvado J
3293 - 3300 Electrical conductivity modeling of carbon-filled liquid-crystalline polymer composites
Keith JM, King JA, Barton RL
3301 - 3305 Humidity sensitivity of polypyrrole and polypyrrole/SBA-15 host-guest composite materials
Geng WC, Li XT, Li N, Zhang T, Wang W, Qiu SL
3306 - 3315 Interfacial, dynamic mechanical, and thermal fiber reinforced behavior of MAPE treated sisal fiber reinforced HDPE composites
Mohanty S, Nayak SK
3316 - 3326 Fully aliphatic polyimides from adamantane-based diamines for enhanced thermal stability, solubility, transparency, and low dielectric constant
Mathews AS, Kim I, Ha CS
3327 - 3333 Synthesis, characterization, and antimicrobial properties of oligo-4-[(pyridine-3-yl-methylene) amino] phenol
Kaya I, Bilici A, Sacak M
3334 - 3340 Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch
Patel VM, Parikh DN, Patel JV, Pandya PD
3341 - 3344 A new modified silicone-TiO2 polymer composite film and its photocatalytic degradation
Lin LH, Lee HT
3345 - 3353 Corn oil-based composites reinforced with continuous glass fibers: Fabrication and properties
Lu YS, Larock RC
3354 - 3368 Mechanical and dielectric relaxation phenomena of poly(ethylene-2,6-napthalene dicarboxylate) by fractional calculus approach
Reyes-Melo ME, Martinez-Vega JJ, Guerrero-Salazar CA, Ortiz-Mendez U
3369 - 3375 Studies of novel copolymers for deep-UV photoresists. I. Synthesis and properties of poly(styrene-co-silicon-containing maleimide)
Shu WJ
3376 - 3384 Extrusion of microcellular open-cell LDPE-based sheet foams
Lee PC, Wang J, Park CB
3385 - 3390 Hg(II) removal with polyacrylamide grafted crosslinked poly(vinyl chloride) beads via surface-initiated controlled/"living" radical polymerization
Liu P, Guo JS
3391 - 3399 Very high modulus high-density polyethylene and high modulus polypropylene obtained by solid-state roll drawing
Ajji A, Dumoulin MM
3400 - 3403 Fourier transform infrared and second derivative ultraviolet spectrometry in determining polystyrene-poly(4-methylstyrene) blend composition
Meal L
3404 - 3412 Homo-oligomerization of maleic anhydride in nonpolar solvents: A kinetic study of deviations from nonlinear behavior
Al-Roomi YM, Hussain KF
3413 - 3419 Synthesis and characterization of a macromolecular surface modifier for polypropylene
Chen HJ, Zhu YF, Zhang Y, Xu JR
3420 - 3429 Synthesis and properties of ethylene/styrene copolymers produced by metallocene catalysts
Haider N, Exposito MT, Munoz-Escalona A, Ramos J, Vega JF, Mendez L, Martinez-Salazar J
3430 - 3437 Developing protective textile materials as barriers to liquid penetration using melt-electrospinning
Lee S, Obendorf SK
3438 - 3445 Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites
Retegi A, Arbelaiz A, Alvarez P, Llano-Ponte R, Labidi J, Mondragon I
3446 - 3456 Rheological investigation of the influence of acrylate polymers on the modification of asphalt
Iqbal MH, Hussein IA, Wahhab HIAA, Amin MB
3457 - 3461 Synthesis and characterization of poly(aryl ether sulfone)s with metallophthalocyanine pendant unit
Zhang YH, Niu YM, Xu R, Wang GB, Jiang ZH
3462 - 3470 Mechanical properties and release studies of chitosan films impregnated with silver sulfadiazine
Azevedo EP, Saldanha TDP, Navarro MVM, Medeiros AC, Ginani MF, Raffin FN
3471 - 3479 Moisture diffusion properties of HFPE-II-52 polyimide
Bhargava P, Chuang KC, Chen K, Zehnder A
3480 - 3488 Effects of nanoparticle treatment on the crystallization behavior and mechanical properties of polypropylene/calcium carbonate nanocomposites
Wan WT, Yu DM, Xie YC, Guo XS, Zhou WD, Cao JP
3489 - 3494 Investigation on gradient dielectric characteristics of bamboo (Dendrocalamus strictus)
Chand N, Jain D, Nigrawal A
3495 - 3497 Development of novel film using paramylon prepared from Euglena gracilis
Kawahara Y, Koganemaru A
3498 - 3503 Preparation and surface activity of modified soy protein
Lin LH, Chen KM
3504 - 3509 Property and reliability of liquid underfill material for IC packaging
Chiu HT, Chung JS
3510 - 3516 Kinetics of the anionic ring-opening polymerization of octamethylcyclotetrasiloxane initiated by potassium isopropoxide
Zhang Y, Zhang ZJ, Wang Q, Xie ZM
3517 - 3525 Environmental effects on poly-p-phenylenebenzobisoxazole fibers. I. Mechanisms of degradation
Walsh PJ, Hu X, Cunniff P, Lesser AJ
3526 - 3544 Theoretical and experimental studies of anisotropic shrinkage in injection moldings of various polyesters
Kwon K, Isayev AI, Kim KH
3545 - 3551 DNA delivery using low molecular water-soluble chitosan nanocomplex as a biomedical device
Choi CY, Kim DG, Jang MJ, Kim TH, Jang MK, Nah JW
3552 - 3558 Synthesis and characterization of thermo- and pH-sensitive block copolymers bearing a biotin group at the poly(ethylene oxide) chain end
Tong DJ, Yao J, Li HR, Han SJ
3559 - 3564 Preparation and properties of novel water-soluble surfactants. I. Synthesis and surface activity of polycarboxylated multihydrophilic surfactants
Lai CC, Chen KM
3565 - 3574 Assessing biodegradability and mechanical, thermal, and morphological properties of an acrylic acid-modified poly(3-hydroxybutyric acid)/wood flours biocomposite
Wu CS
3575 - 3579 Pesticides removal performance by low-pressure reverse osmosis membranes
Bhattacharya A, Ray P, Brahmbhatt H, Vyas KN, Joshi SV, Devmurari CV, Trivedi JJ
3580 - 3589 New anion exchanger organic-inorganic hybrid materials and membranes from a copolymer of glycidylmethacrylate and gamma-methacryloxypropyl trimethoxy silane
Wu YH, Wu CM, Gong M, Xu TW
3590 - 3596 Electrode polarization for nylon 1010 with dielectric relaxation spectroscopy
Lu HB, Zhang XY, He B, Zhang H
3597 - 3609 Synthesis and characterization of polycarbonates by melt-phase interchange reactions with alkylene and arylene diphenyl dicarbonates
Al-Hamouz OCS, Sweileh BA, Al-Salah HA
3610 - 3615 Bismaleimide modified bis propargyl ether bisphenol A resin: Synthesis, cure, and thermal properties
Liu F, Li WW, Wei LH, Zhao T
3616 - 3627 Characterization of sulfonated poly(styrene-divinylbenzene) and poly(divinylbenzene) and its application as catalysts in esterification reaction
Coutinho FMB, Rezende SM, Soares BG
3628 - 3633 Effect of clay on immiscible morphology of poly(butylene terephthalate)/polyethylene blend nanocomposites
Wu DF, Zhou CX, Zhang M
3634 - 3640 Removal of endocrine disruptors in milk by circulation through polydimethylsiloxane tubing
Higuchi A, Takayama E, Hirai K, Ishikawa T, Takizawa N, Sakurai M, Egashira S, Matsuoka Y, Natori SH
3641 - 3653 Synthesis and properties of fluorinated aromatic poly(amide imide)s based on 4,4'-bis(4-amino-2-trifluoromethylphenoxy)benzophenone and various bis(trimellitimide)s
Su YY, Yang CP
3654 - 3663 Hydrogel-forming agar-graft-PVP and kappa-carrageenan-graft-PVP blends: Rapid synthesis and characterization
Prasad K, Mehta G, Meena R, Siddhanta AK
3664 - 3672 Pseudoreinforcement effect of multiwalled carbon nanotubes in epoxy matrix composites
Zhuang GS, Sui GX, Sun ZS, Yang R
3673 - 3678 Compression, cleavage, and shear resistance of composite construction materials produced from softwoods and hardwoods
Kilic M, Celebi G
3679 - 3684 Synthesis of a thioether modified hyperbranched polyglycerol and its template effect on fabrication of CdS and CdSe nanoparticles
Wan DC, Fu Q, Huang JL
3685 - 3690 Dispersion copolymerization of acrylamide with acrylic acid in an aqueous solution of ammonium sulfate: Synthesis and characterization
Liu XG, Chen DN, Yue YM, Zhang WD, Wang PX
3691 - 3697 Superfine structure, physical properties, and dyeability of alkaline hydrolyzed poly(ethylene terephthalate)/silica nanocomposite fibers prepared by in situ polymerization
Yang YZ, Gu HC
3698 - 3703 Mechanical and thermomechanical characterization of PVC/polyalkylacrylate blends
Chakrabarti R, Chakraborty D
3704 - 3713 Experimental investigation of infrared rapid surface heating for injection molding
Chang PC, Hwang SJ
3714 - 3719 Crystallization behavior of PVDF in PVDF-DMP system via thermally induced phase separation
Gu MH, Zhang J, Wang XL, Ma WZ
3720 - 3731 Synthesis of copolymeric hydrogels using gamma radiation and their utilization in the removal of some dyes in wastwater
Abdel-Aal SE
3732 - 3740 Kinetics of the effect of ageing on tensile properties of a natural rubber compound
Ngolemasango EF, Bennett M, Clarke J
3741 - 3750 Synthesis and characterization of water soluble poly(N-acetyl)iminoethylene and poly(ethyleneimine) by ion-exchanged clay montmorillonite
Hachemaoui A, Yahiaoui A, Belbachir M
3751 - 3763 Intercalation of epoxy resin in organically modified montmorillonite
Hutchinson JM, Montserrat S, Roman F, Cortes P, Campos L
3764 - 3773 Effects of ultrasound on the synthesis and properties of polyurethane foam/clay nanocomposites
Seo WJ, Sung YT, Kim SB, Lee YB, Choe KH, Choe SH, Sung JY, Kim WN
3774 - 3781 Cure kinetics of aqueous phenol-formaldehyde resins used for oriented strandboard manufacturing: Effect of wood flour
Lei Y, Wu QL
3782 - 3790 Blending and characterizations of microbial poly(3-hydroxybutyrate) with dendrimers
Xu SL, Luo RC, Wu LP, Xu KT, Chen GQ
3791 - 3794 Reswelling behavior of polycation hydrogels carrying charges on the chain backbone by two-step surfactant bindings
Chen L, Yu X, Li QY
3795 - 3804 Synthesis, characterization, and thermal degradation of oligo-2-(morpholinoiminomethyl)phenol and its Pb(II) complex compound
Kaya I, Bilici A
3805 - 3808 Synthesis, characterization, and properties of a linear poly(ester-amide) containing ethylene glycol lactate sequences
Xiao CM, He YY, Luo X
3809 - 3818 Nonisothermal crystallization behavior of melt-intercalated polyethylene-clay nanocomposites
Yuan Q, Awate S, Misra RDK
3819 - 3829 Environmental effects on poly-p-phenylenebenzobisoxazole fibers. II. Attempts at stabilization
Walsh PJ, Hu XB, Cunniff P, Lesser AJ
3830 - 3841 Interfacial interaction, morphology, and tensile properties of a composite of highly crystalline cellulose and maleated polypropylene
Qiu WL, Endo T, Hirotsu T
3842 - 3847 Synthesis of novel phosphorous-containing biphenol, 2-(5, 5-dimethyl-4-phenyl-2-oxy-1,3,2-dioxaphosphorin-6-yl)-1,4-benzenediol and its application as flame-retardant in epoxy
Xia XN, Lu YB, Zhou X, Xiong YQ, Zhang XH, Xu WJ
3848 - 3856 Direct synthesis and characterization of cross-linked polysiloxanes via anionic ring-opening copolymerization with octaisobutyl-polyhedral oligomeric silsesquioxane and octamethylcyclotetrasiloxane
Li HY, Zhang JY, Xu RW, Yu DS
3857 - 3861 Preparation and pH-sensitive swelling behavior of physically crosslinked polyampholyte gels
Zhao YB, Yang YJ, Yang XL, Xu HB
3862 - 3867 Ecofriendly poly(vinyl alcohol) and coconut shell powder composite films: Physico-mechanical, thermal properties, and swelling studies
Ramaraj B, Poomalai P
3868 - 3876 Thermal and mechanical properties of poly(ethylene terephthalate)/lamellar zirconium phosphate nanocomposites
Brandao LS, Mendes LC, Medeiros ME, Sirelli L, Dias ML
3877 - 3888 Reaction-induced phase separation in poly(vinyl acetate)/polyester blend
Bulliard X, Michaud V, Manson JAE
3889 - 3899 Preparation of polypropylene/montmorillonite nanocomposites with an exfoliated structure by a designed route
Hong HQ, He H, Jia ZX, Ding C, Jia DM
3900 - 3906 Mechanistic study of boron trifluoride catalyzed epsilon-caprolactone polymerization in the presence of glycerol
Jiang G, Walker GS, Jones IA, Rudd CD
3907 - 3911 Long-term water uptake behavior of lignocellulosic-high density polyethylene composites
Najafi SK, Tajvidi M, Chaharmahli M
3912 - 3918 Synergic influence of a surfactant and ultrasonication on the preparation of soluble, conducting polydiphenylamine/silica-nanoparticle composites
Lee KP, Gopalan AI, Lee SH, Showkat AM, Nho YC
3919 - 3926 Synthesis and properties of novel macromolecular coupling agents prepared by ATRP
Zhan HW, Jiang Y, Dong YQ, Li HT, Zhang K, Wang D, Wang JY
3927 - 3933 Polyelectrolyt multilayers of poly(vinylamine hydrochloride-co-N-vinylformamide) with variable primary amine content and a weak polyacid poly(acrylic acid)
Serizawa T, Kawanishi N, Akashi M
3934 - 3939 Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions
Lyoo WS, Yeum JH, Kwon OW, Shin DS, Han SS, Kim BC, Jeon HY, Noh SK
3940 - 3943 Development of dispersion in rubber-particle compounds in internal and continuous mixers
White JL, Liu D, Bumm SH
3944 - 3948 A novel method to prepare a metallocene adduct catalyst with low moisture sensitivity
Wang HT, Chen W, Zheng G, Li HQ
3949 - 3954 Compatibilization of PP/EPDM blends by grafting acrylic acid to polypropylene and epoxidizing the diene in EPDM
Ao YH, Sun SL, Tan ZY, Zhou C, Zhang HX
3955 - 3962 Synthesis, characterization, and optoelectronic properties of two new polyfluorenes/poly(p-phenylenevinylene)s copolymers
Yu ZQ, Tan ST, Zou YP, Fan BH, Yuan ZL, Li YF
3963 - 3971 Atomic force microscopy analysis of cellulose triacetate surface modified in low temperature argon plasma and its adhesion behavior
Koo K, Park YM, Yu JY
3972 - 3977 Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs
Zhang HW, Zhu BK, Xu YY
3978 - 3985 Sorption of CMID-containing cations on strongly basic anion exchangers
Drutsa R, Gutsanu V, Rusu V
3986 - 3993 Thermostability and esterification of a polyethylene-immobilized lipase from Bacillus coagulans BTS-3
Kumar S, Ola RP, Pahujani S, Kaushal R, Kanwar SS, Gupta R
3994 - 3999 Effects of polyaniline content in chlorrub-based coatings on corrosion protection of steel
Sathiyanarayanan S, Muthukrishnan S, Venkatachari G
4000 - 4006 Surface modification of henequen (Agave fourcroydes) fibers by ultraviolet curing with 2-hydroxyethylacrylate and ethvlacrvlate: Effect of additives on degradable properties
Rahman MM, Chowdhury AMS, Islam MJ, Khan MA
4007 - 4015 Influence of graphite particle size and shape on the properties of NBR
Yang J, Tian M, Jia QX, Zhang LQ, Li XL
4016 - 4022 Effect of crosslinking concentration on mechanical and thermodynamic properties in acrylic acid-co-methyl methacrylate hydrogels
Katime I, de Apodaca ED, Rodriguez E
4023 - 4029 Graft copolymerization of soybean protein isolate and methacrylic acid
Yang C, Song XQ, Sun C, Chen MQ, Xu YL, Liu XY, Ni ZB
4030 - 4039 Sequential interpenetrating polymer networks of novolac resin and poly(n-butyl methacrylate)
Goswami S, Chakrabarty D
4040 - 4044 Rheological properties in blends of poly(aryl ether ether ketone) and liquid crystalline poly(aryl ether ketone)
Chen J, Liu XC, Yang DC
4045 - 4048 Monomer apparent reactivity ratios for acrylonitrile/methyl vinyl ketone copolymerization system
Hou C, Liu JS, Ji CN, Ying L, Sun HB, Wang CG
4049 - 4057 Thermal behavior of poly(acrylic acid)-poly(vinyl pyrrolidone) and poly(acrylic acid)-metal-poly(vinyl pyrrolidone) complexes
Moharram MA, Khafagi MG
4058 - 4065 Hydrophobically graded polyester polyol acrylate polymers: Synthesis, characterization, and microencapsulation of sulfamethoxazole for controlled release application
Nivasu MV, Tammishetti S
4066 - 4074 Effect of ionic strength on the temperature-dependent behavior of hydroxypropyl methylcellulose solution and matrix tablet
Xu XM, Song YM, Ping QN, Wang Y, Liu XY
4075 - 4084 Model of liquid permeability in swollen composites of superabsorbent polymer and fiber
Buchholz FL