화학공학소재연구정보센터

Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.101, No.3 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (117 articles)

1237 - 1247 New gasoline and gas barrier from plasticized carbon black reinforced butyl rubber/high-density polyethylene blends
El-Tantawyl F, Aal NA
1248 - 1251 Research on butyl methacrylate-lauryl methacrylate copolymeric fibers for oil absorbency
Feng Y, Xiao CF
1252 - 1256 Polyaniline-coated PET conductive yarns: Study of electrical, mechanical, and electro-mechanical properties
Kim B, Koncar V, Dufour C
1257 - 1265 Kinetics and thermal properties of epoxy resin cured with Ni(II)-tris-(O-pheneylendiamine) bromide
Omrani A, Rostami AA, Ghaemy M
1266 - 1272 Characterization of diene monomers as healing agents for autonomic damage repair
Liu X, Lee JK, Yoon SH, Kessler MR
1273 - 1282 Surface modification of a biomedical poly(ester) urethane by several low-powered gas plasmas
Jiang M, Hu P
1283 - 1290 Preparation and characterization of OH-functionalized magnetic nanogels under UV irradiation
Gong PJ, Yu JH, Sun HW, Hong J, Zhao SF, Xu DM, Yao SD
1291 - 1294 Preparation of nanopolyethylene wire with carbon nanotubes-supported CP2ZrCl2 catalyst
Dong XC, Wang L, Jiang GH, Sun TX, Zhao ZR, Yu HJ, Chen T
1295 - 1308 Crystallization kinetics of toughed poly(butylene terephthalate)/polycarbonate blends
Bai HY, Zhang Y, Zhang YX, Zhang XF, Zhou W
1309 - 1316 Morphology and barrier mechanism of biaxially oriented poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends
Wu W, Wagner MH, Qian Q, Pu WG, Kheirandish S
1317 - 1333 Molecular structure and orientation of gel-spun polyethylene fibers
Karacan I
1334 - 1339 Immobilization of a nonspecific chitosan hydrolytic enzyme for application in preparation of water-soluble low-molecular-weight chitosan
Feng T, Du YM, Yang JH, Li J, Shi XW
1340 - 1346 Grafting of butyl acrylate and methyl methacrylate on butyl rubber using electron beam radiation
Haldar SK, Singha NK
1347 - 1355 Synthesis, characterization, and antimicrobial studies of newly developed metal-chelated epoxy resins
Nishat N, Ahmad S, Ahamad T
1356 - 1361 Cationic copolymerization behavior of a bicyclic orthoester having hydroxy group with glycidyl phenyl ether and volume change on their copolymerization
Kume M, Endo T
1362 - 1367 Melt spinning and drawing process of PET side-by-side bicomponent fibers
Oh TH
1368 - 1373 Structure and properties of a poly(amino ether) resin after reprocessing in the melt state
Granado A, Eguiazabal JI, Nazabal J
1374 - 1380 Monitoring of chemical reactions during polymer synthesis by real-time attenuated total reflection (ATR)-FTIR spectroscopy
Sahre K, Schulze U, Hoffmann T, Abd Elrehim M, Eichhorn KJ, Pospiech D, Fischer D, Voit B
1381 - 1385 Water-soluble copolymers. II. Inverse emulsion terpolymerization of acrylamide, sodium acrylate, and acryloyloxyethyl trimethylammonium chloride
Peng XH, Peng XC
1386 - 1390 Study on morphology of high impact polypropylene prepared by in situ blending
Jiang T, Chen HX, Ning YN, Kuang DT, Qu GM
1391 - 1397 Competitive transport of hydrochloric acid and zinc chloride through polymeric anion-exchange membrane
Palaty Z, Zakova A
1398 - 1401 Swelling studies in electrochemically prepared acrylamide/N,N' methylene bisacrylamide gels
Yidiz G, Paril A, Giz A, Catalgil-Giz H
1402 - 1406 Eudragit S (methyl methacrylate methacrylic acid copolymer)/fatty acid blends as form-stable phase change material for latent heat thermal energy storage
Sari A, Alkan C, Kolemen U, Uzun O
1407 - 1425 Thermal transitions in polyimide transfer under sliding against steel, investigated by Raman spectroscopy and thermal analysis
Samyn P, De Baets P, Van Craenenbroeck J, Verpoort F, Schoukens G
1426 - 1431 Effect of copolymer mixing on elongation property of as-spun PET fibers
Oh TH
1432 - 1443 Characterization and comparison of polyurethane networks prepared using soybean-based polyols with varying hydroxyl content and their blends with petroleum-based polyols
Pechar TW, Sohn S, Wilkes GL, Ghosh S, Frazier CE, Fornof A, Long TE
1444 - 1455 Does morphology stick? Tailored particle morphologies by swelling polymerization process
Kirsch S, Kutschera M, Choi NY, Frechen T
1456 - 1462 Preparation of bimodal polypropylene in two-step polymerization
Abedi S, Hassanpour N
1463 - 1470 Readily decomposed thermosetting resins for recovering and reusing resin-embedded materials
Mimura K, Ito H
1471 - 1476 Physical properties of polyamide 6/metallocene isotactic polypropylene conjugated filaments
Hsiao KJ, Jue ZF, Kong DC, Chen FL
1477 - 1486 Crashworthiness of various random chopped carbon fiber reinforced epoxy composite materials and their strain rate dependence
Jacob GC, Starbuck JM, Fellers JF, Simunovic S, Boeman RG
1487 - 1493 New 2-hydroxyethyl methacrylate resins with good swelling characteristics
Bukowska A, Bukowski W, Noworol J
1494 - 1500 Preparation, characteristics, and flocculation behavior of modified palygorskite-polyacrylamide ionic hybrids
Wang M, Qian JW, Zheng BQ
1501 - 1505 Waste polyvinyl chloride-modified bitumen
Abdel-Goad MAH
1506 - 1510 Studies of poly(8-hydroxy-4-azoquinolinephenolformaldehyde) and its metal complexes
Vijayalakshmi S, Subramanian S, Rajagopan S, Kaliyappan T
1511 - 1514 Determination of degradation rate of acrylonitrile polymers
Hou C, Qu RJ, Qun W, Ying L
1515 - 1521 Preparation of biodegradable crosslinking agents and application in PVP hydrogel
Jiao YP, Liu ZH, Ding S, Li LH, Zhou CR
1522 - 1528 Fabrication and thermal properties of MicroPCMs: Used melamine-formaldehyde resin as shell material
Su JF, Wang LX, Ren L
1529 - 1534 Magnetically active composite cellulose fibers
Rubacha M
1535 - 1542 Synthesis, characterization, and pressure-sensitive properties of butyl acrylate and methyl acrylate copolymers
Wang CL, Wang L, Chen C, Chen T, Jiang GH
1543 - 1555 N-phenyl-3-substituted 5-pyrazolone derivatives as organic stabilizers for rigid poly(vinyl chloride) photodegradation
Sabaa MW, Oraby EH, Naby ASA, Mohamed RR
1556 - 1561 Interaction of functional groups of gelatin and montmorillonite in nanocomposite
Xu SW, Zheng JP, Tong L, Yao KD
1562 - 1569 The tensile properties of strain-crystallising vulcanisates. I. A new theory to explain strengthening
Van der Horst M, McGill WJ, Woolard CD
1570 - 1574 Simulation of the polymeric fluid flow in the feed distributor of melt blowing process
Wang XH, Chen T, Huang XB
1575 - 1582 FT-Raman studies of a range of polyimides subjected to high-energy Radiations at room and elevated temperatures
Devasahayam S, Hill DJT, Connell JW
1583 - 1590 Dynamic mechanical and thermal properties of plasticized poly(lactic acid)
Ren ZJ, Dong LS, Yang YM
1591 - 1597 Modification of polyethersulphone induced by high energy proton, C+, and Ne6+ ions: A spectroscopic study
Kumar SV, Ghadei B, Jay PK, Dey K, Krishna JBM, Saha A
1598 - 1601 ATRP of acrylonitrile catalyzed by FeCl2/succinic acid under microwave irradiation
Hou C, Qu RJ, Ji CN, Wang CH, Sun CM
1602 - 1609 Preparation and characterization of ciprofloxacin-loaded alginate/chitosan sponge as a wound dressing material
Ozturk E, Agalar C, Kececi K, Denkbas EB
1610 - 1619 Phase behavior and properties of in situ-reinforcing elastomer composites based on thermoplastic elastomers and thermotropic liquid crystalline copolyester
Saikrasun S, Amornsakchai T
1620 - 1629 Modeling cellulose heat and degree of gelation for methyl hydrogels with NaCl additives
Joshi SC, Lam YC
1630 - 1636 Effect of pretreatment with detergent on mechanical properties of photocured coir (Cocos nucifera) fiber with ethyleneglycol dimethacrylate
Khan MA, Bhattacharia SK, Hassan MM, Sultana A
1637 - 1645 Synthesis and characterization of xanthan gum-g-N-vinyl formamide with a potassium monopersulfate/Ag(I) system
Banerjee J, Srivastava A, Srivastava A, Behari K
1646 - 1656 Lipase-catalyzed synthesis of polyhydric alcohol-poly(ricinoleic acid) ester star polymers
Kelly AR, Hayes DG
1657 - 1663 Modeling of polymer/clay nanocomposite formation
Kim Y, White JL
1664 - 1669 Improvement of processability of clay/polylactide nanocomposites by a combinational method: In situ polymerization of L-lactide and melt compounding of polylactide
Lee S, Kim CH, Park JK
1670 - 1677 Thermal analysis and mechanical characterization of maleimide-functionalized benzoxazine/epoxy copolymers
Ishida H, Ohba S
1678 - 1686 Tribological properties of micro- and nanoparticles-filled poly(etherimide) composites
Xian GJ, Zhang Z, Friedrich K
1687 - 1691 Synthesis of poly(ester sulfoimide) from dichlorocarbonylimide of disaccharindicarboxylic acid and aromatic diols
Aslanov TA, Salakhov MS, Efendiev AA
1692 - 1699 The effects of metallic derivatives released from montmorillonite on the thermal stability of poly(ethylene terephthalate)/montmorillonite nanocomposites
Guan GH, Li CC, Zhang D, Jin Y
1700 - 1710 Structure and properties of polymer-wood composites based on an aliphatic copolyamide and secondary polyethylenes
Mamunya Y, Zanoaga M, Myshak V, Tanasa F, Lebedev E, Grigoras C, Semynog V
1711 - 1722 Morphology, thermal, and mechanical properties of polyamide 66/clay nanocomposites with epoxy-modified organoclay
Gyoo PM, Venkataramani S, Kim SC
1723 - 1730 Surface-modified polysulfone membranes: Aqueous phase oxidation via persulfate radical
Dal-Cin MM, Guiver MD, Striez CN, Carlsson DJ, Kumar A
1731 - 1737 Application of Fourier transform infrared spectroscopy in the study of interactions between PVC and plasticizers: PVC/plasticizer compatibility versus chemical structure of plasticizer
Gonzalez N, Fernandez-Berridi MJ
1738 - 1743 Effect of heat treatment on the structure and properties of lyocell fibers
Zhang HH, Shao HL, Hu XC
1744 - 1750 Effect of the epoxy molecular weight on the properties of a cyanate ester/epoxy resin system
Liang GZ, Ren PG, Zhang ZP, Lu TL
1751 - 1755 Tensile properties of thermoplastic starch-PVB blends
Sita C, Burns M, Hassler R, Focke WW
1756 - 1762 Network parameters and volume phase transition behavior of poly(N-isopropylacrylamide) hydrogels
Caykara T, Kiper S, Demirel G
1763 - 1774 Carbon black filled powdered natural rubber: Preparation, particle size distribution, mechanical properties, and structures
Zhang AQ, Wang LS, Lin YL, Mi XF
1775 - 1786 Catalytic effect of 2,2'-diallyl bisphenol a on thermal curing of cyanate esters
Koh HCY, Dai J, Tan E, Liang WR
1787 - 1792 Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard
Park BD, Kang EC, Park JY
1793 - 1798 1-(Bromoacetyl)pyrene and its arsonium salt as novel photoinitiators for styrene polymerization
Mishra A, Daswal S
1799 - 1805 Effect of a macromolecular coupling agent on the properties of aluminum hydroxide/PP composites
Plentz RS, Miotto M, Schneider EE, Forte MSMC, Mauler RS, Nachtigall SMB
1806 - 1809 Partial exfoliation and layer expansion of vermiculite layer in solid state by solid state shear milling ((SM)-M-3) method
Shao WG, Wang Q
1810 - 1815 Preparation and characterization of composites: Ethylene-propylene-diene terpolymer-graft-maleic anhydride/CaCO3
Zhang J, Ding QJ, Hu BX, Liu BL, Shen J
1816 - 1825 The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends
Semba T, Kitagawa K, Ishiaku US, Hamada H
1826 - 1832 Mechanical properties of blocked polyurethane/epoxy interpenetrating polymer networks
Chen CH, Sun YY
1833 - 1841 Synthesis and phase separation of poly(N-isopropyl acrylamide-co-methoxy polyethyleneglycol monomethacrylate)
Kim YC, Kil DS, Kim JC
1842 - 1847 Effects of in situ biomineralization on microstructural and mechanical properties of hydroxyapatite/polyethylene composites
Huang SP, Zhou KC, Zhu W, Huang BY, Li ZY
1848 - 1852 A novel feed-stock recyclable hyperbranched polymaleimide: Synthesis and characterization
Pan WJ, Liu HW, Wu ST, Wilen CE
1853 - 1856 pH electrodes constructed from polyaniline/zeolite and polypyrrole/zeolite conductive blends
Malkaj P, Dalas E, Vitoratos E, Sakkopoulos S
1857 - 1865 Separation of phenol from aqueous solution by membrane pervaporation using modified polyurethaneurea membranes
Sinha B, Ghosh UK, Pradhan NC, Adhikari B
1866 - 1871 A novel alkoxysilane-modified high solids hydroxyl acrylic polyurethane: Preparation and surface properties
Zhu F, Zhang GY, Xu SY, Hong XL, Dong JF
1872 - 1879 Synthesis and properties for interpenetrating polymer network of modified epoxy resins
Ho TH, Leu TS, Cheng SS
1880 - 1884 Structure and properties of UHMWPE fiber/carbon fiber hybrid composites
Lu SH, Liang GZ, Zhou ZW, Li F
1885 - 1891 Preparation of polyvinylamine/polysulfone composite hollow-fiber membranes and their CO2/CH4 separation performance
Dong CM, Wang Z, Yi CH, Wang SC
1892 - 1898 Preparation and properties of crosslinked chitosan thermosensitive hydrogel for injectable drug delivery systems
Zan J, Chen HH, Jiang GQ, Lin Y, Ding FX
1899 - 1912 Miscibility and hydrolytic degradation of bioreabsorbable blends of poly(p-dioxanone) and poly(L-lactic acid) prepared by fusion
Pezzin APT, Duek EAR
1913 - 1918 ZnS deposition on oxadiazole-terpyridine copolymer
Chrissanthopoulos A, Tzanetos NP, Andreopoulou AK, Kallitsis J, Dalas E
1919 - 1924 Enhancing the efficiency of MEH-PPV and PCBM based polymer solar cells via optimization of device configuration and processing conditions
Chang EC, Chao CI, Lee RH
1925 - 1930 Determination of the infinite dilution diffusion and activity coefficients of alkanes in polypropylene by inverse gas chromatography
Zhao CW, Li JD, Zeng CY
1931 - 1936 Effects of crosslinking time and amount of sulfophthalic acid on properties of the sulfonated poly(vinyl alcohol) membrane
Chanthad C, Wootthikanokkhan J
1937 - 1942 Preparation and characterization of poly(silyl ester)s containing 2,2-bis (p-dimethylsiloxy-phenyl) propane units in the polymer backbones
Han NF, Liu ZL, Jin LQ, Yue Y
1943 - 1952 Properties of composite laminated material produced with layers of beech and paperboard made from waste paper
Celebi G, Ilce AC, Kilic M, Ozkaya K
1953 - 1957 Polybenzyl methacrylate brush used in the top-down/bottom-up approach for nanopatterning technology
Tsai YS, Wang WC
1958 - 1962 Hydrophobic polymers as barrier dispersion coatings
Vaha-Nissi M, Kervinen K, Savolainen A, Egolf S, Lau W
1963 - 1971 The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene
Pick LT, Harkin-Jones E, Oliveira MJ, Cramez MC
1972 - 1981 Anionic polymerization of lactams: A comparative study on various methods of measuring the conversion of epsilon-caprolactam to polyamide 6
Zhang CL, Feng LF, Hu GH
1982 - 1987 Toughening of wood particle composites - Effects of sisal fibers
Nunez AJ, Aranguren MI, Berglund LA
1988 - 1994 Synthesis and in vitro degradation of novel copolymers of cyclic carbonate and D,L-lactide
Xu J, Liu ZL, Zhuo RX
1995 - 1999 Salt and pH responsive property of a starch-based amphoteric superabsorbent hydrogel with quaternary ammonium and carboxyl groups (II)
Xu SM, Cao LQ, Wu RL, Wang JD
2000 - 2008 Synthesis and characterization of new cardo poly(bisbenzothiazole)s from 1,1-bis(4-amino-3-mercaptophenyl)-4-tert-butylcyclohexane dihydrochloride
Huang W, Xu HJ, Yin J
2009 - 2016 Depolymerization of poly(ethylene terephthalate) wastes using ethanol and ethanol/water in suipercritical conditions
de Castro REN, Vidotti GJ, Rubira AF, Muniz EC
2017 - 2021 Preparation and anisotropic mechanical behavior of highly-oriented electrospun poly(butylene terephthalate) fibers
Mathew G, Hong JP, Rhee JM, Leo DJ, Nah C
2022 - 2026 Property of ethylene vinyl acetate copolymer in melting processing
Chen Z, Fang PF, Wang HM, Zhang SP, Wang SJ
2027 - 2033 Viscoplastic deformation of an epoxy resin at elevated temperatures
Kontou E
2034 - 2039 Curing of phenolic resins modified with chestnut tannin extract
Pena C, Martin MD, Tejado A, Labidi J, Echeverria JM, Mondragon I
2040 - 2044 Shrink-induced striped pattern on a thin gold film and switching of its orientation
Watanabe M
2045 - 2050 Water absorption behavior of acrylonitrile-butadiene (NBR) latex impregnated jute nonwoven fabric composites
Kumar MNS, Siddaramaiah
2051 - 2056 Properties of organic-inorganic composite materials prepared from acrylic resin emulsions and colloidal silicas
Wada T, Inui K, Uragami T
2057 - 2061 Poly(ethylene-alt-maleic acid) as complexing reagent to sevarate metal ions usinig membrane filtration
Rivas BL, Pooley SA, Pereira E, Montoya E, Cid R
2062 - 2069 Kinetic study of radical polymerization. IV. Determination of reactivity ratio in copolymerization of styrene and itaconic acid by H-1-NMR
Mahdavian AR, Abdollahi M, Mokhtabad L, Bijanzadeh HR, Ziaee F
2070 - 2078 Preparation and characterization of genistein containing poly(ethylene glycol) microparticles
Motlekar N, Khan MA, Youan BBC
2079 - 2087 Preparation and thermal stability of new cellulose-based poly(propylene imine) and poly(amido amine) hyperbranched derivatives
Hassan ML
2088 - 2094 Synthesis of polyaniline/MCM-41 composite through surface polymerization of aniline
Feng XM, Yang G, Liu YG, Hou WH, Zhu JJ
2095 - 2100 Copolymerization kinetics of acrylonitrile with amino ethyl-2-methyl propenoate in H2O/DMSO mixture
Hou C, Qu RJ, Ji CN, Wang CH, Sun CM, Zhang CT
2101 - 2107 Energy of chemical bonds and spatial energy principles of the hybridization of atom orbitals
Korablev GA, Zaikov GE