Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.100, No.2 Entire volume, number list
ISSN: 0021-8995 (Print) 

In this Issue (106 articles)

853 - 866 Ozonolysis of model olefins - Efficiency of antiozonants
Huntink NM, Datta RN, Talma A, Noordermeer JWM
867 - 878 Effects of reactive low-profile of cured unsaturated polyester additives on the properties resins. II. Glass-transition temperature and mechanical properties
Dong JP, Lee JH, Lai DH, Huang YJ
879 - 885 Block copolymer of trans-polyisoprene and urethane segment: Shape memory effects
Ni XY, Sun XH
886 - 891 An amphoteric water-soluble copolymer. II. Effect of its molecular weight on the dispersion of barium titanate in water
Ying KL, Hsu KC, Wei WCJ
892 - 899 Kneading and molding of ceramic microparts by precision powder injection molding (PIM)
Yang SY, Huang CK, Lin BC, Wei WCJ
900 - 910 Relative strength of H-bonding groups on biodegradable polymer-based blends in solution
Soria V, Gomez CM, Falo M, Abad C, Campos A
911 - 917 Study of the flexural modulus of natural fiber/polypropylene composites by injection molding
Shibata S, Cao Y, Fukumoto I
918 - 922 Synthesis and characterization of suspension terpolymer of N-cyclohexylmaleimide, methyl methacrylate, and styrene
Yang LT, Sun DH
923 - 927 Synthesis and characterization of photolumine scent conjugated polymer containing N-(alpha-naphthyl)-carbazole unit
Feng LH, Zhang CH, Chen ZB, Qin AJ, Yuan MS, Bai FL
928 - 936 Synthesis and characterization of antibacterial polychelates of urea-formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions
Nishat N, Ahmad S, Rahisuddin, Ahamad T
937 - 945 NMR imaging and differential scanning calorimetry study on drying of pine, birch, and reed pulps and their mixtures
Heikkinen S, Alvila L, Pakkanen TT, Saari T, Pakarinen P
946 - 953 Chemical synthesis and characterization of polyaniline nanofiber doped with gadolinium chloride
Zhang SL, Kan SQ, Kan JQ
954 - 961 Poly(methacrylic acid)-bound dihydroxybenzene units: Redox polymers
Moulay S, Mehdaoui R
962 - 966 Non-catalytic anhydride curing of hydrogenated bisphenol-A glycidyl ether with 1,2,4-cyclohexanetricarboxylic anhydride and light emitting diode encapsulation
Morita Y, Sugino H
967 - 979 Effects of reactive low-profile additives on the volume shrinkage and internal pigmentability for low-temperature cure of unsaturated polyester
Dong JP, Chiu SG, Hsu MW, Huang YJ
980 - 988 Miscibility and crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(vinyl acetate) blends
Chiu HJ
989 - 999 Microstructure and mechanical behavior of polyamide 66-precipitated calcium carbonate composites: Influence of the particle surface treatment
Cayer-Barrioz J, Ferry L, Frihi D, Cavalier K, Seguela R, Vigier G
1000 - 1007 Solid polymer electrolytes. XI. Preparation, characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical-covalent polyether-siloxane hybrids
Liang WJ, Chen YP, Wu CP, Kuo PL
1008 - 1012 Development of acrylonitrile-butadiene (NBR)/polyamide thermoplastic elastomeric compositions: Effect of carboxylation in the NBR phase
Chowdhury R, Banerji MS, Shivakumar K
1013 - 1018 Water-assisted formation of honeycomb films of poly(L-lactic-co-glycolic acid)
Tian Y, Ding HY, Shi YQ, Jiao QZ, Wang XL
1019 - 1023 Evaluation of blood compatibility of MeO-PEG-poly (D,L-lactic-co-glycolic acid)-PEG-OMe triblock copolymer
Duan YR, Nie Y, Gong T, Wang Q, Zhang ZR
1024 - 1031 Extraction of CdS pigment from waste polyethylene
Wanrooij PHP, Agarwal US, Meuldijk J, van Kasteren JMN, Lemstra PJ
1032 - 1038 Clay-starch composites and their application in papermaking
Yoon SY, Deng YL
1039 - 1047 Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks
Sarazin P, Virgilio N, Favis BD
1048 - 1056 Ultraviolet radiation curable epoxy resin encapsulant for light emitting diodes
Kumar RN, Keem LY, Mang NC, Abubakar A
1057 - 1066 Pore structure of macroporous monolithic cryogels prepared from poly(vinyl alcohol)
Plieva FM, Karlsson M, Aguilar MR, Gomez D, Mikhalovsky S, Galaev IY, Mattiasson B
1067 - 1082 High modulus polypropylene fibers. II. Influence of fiber preparation upon structure and morphology
Gregor-Svetec D
1083 - 1092 Physical properties of natural rubber/organoclay nanocomposites compatibilized with epoxidized natural rubber
Teh PL, Ishak ZAM, Hashim AS, Karger-Kocsis J, Ishiaku US
1093 - 1102 Controlled heterogeneous modification of cellulose fibers with fatty acids: Effect of reaction conditions on the extent of esterification and fiber properties
Freire CSR, Silvestre AJD, Neto CP, Belgacem MN, Gandini A
1103 - 1112 The use of H-1 NMR and UV-vis measurements for quantitative determination of trans/cis isomerization of a photo-responsive monomer and its copolymer
Mortiruzzaman M, Talbot JDR, Sabey CJ, Fernando GF
1113 - 1123 Preparation and solubility of water-methanol mixtures in sulfortated poly(etherketone) containing a cardo-ring structure
Akiba C, Watanabe K, Nagai K, Hirata Y, Nguyen QT
1124 - 1136 Ethylene and 1-hexene sorption in LLDPE under typical gas-phase reactor conditions: Experiments
Novak A, Bobak M, Kosek J, Banaszak BJ, Lo D, Widya T, Ray WH, de Pablo JJ
1137 - 1145 New dinitroxide for stable free radical polymerization of styrene
Zhang ZB, Zhu XL, Zhu J, Cheng ZP, Lu JM
1146 - 1161 Effect of bisphenol A on the miscibility, phase morphology, and specific interaction in immiscible biodegradable poly(epsilon-caprolactone)/poly(L- lactide) blends
Kuo SW, Huang CF, Tung YC, Chang FC
1162 - 1168 Chitosan: Aspects of fiber spinnability
El-Tahlawy K, Hudson SM
1169 - 1175 Dyeing properties of Bombyx mori silks grafted with methyl methacrylate and methacrylamide
Prachayawarakorn J, Kryratsamee W
1176 - 1183 Fibrillation tendency of cellulosic fibers. VII. Combined effects of treatments with an alkali, crosslinking agent, and reactive dye
Zhang W, Okubayashi S, Badura W, Bechtold T
1184 - 1197 Modification of polyolefin films surface with sodium hypochlorite
Iguerb O, Demoustier-Champagne S, Marchand-Brynaert J, Daoust D, Sclavons M, Devaux J
1198 - 1204 Improvement of thermal stability of new heteroaromatic poly(azomethine urethane)s
Issam AM, Ismail J
1205 - 1213 Miscibility enhancement on the immiscible poly (vinyl pyrrolidone) and poly (ethyl methacrylate) with poly (vinyl phenol)
Hsu WP
1214 - 1221 The effect of substitution levels on the luminescent and degradation properties of fluorescent poly(ester-anhydride)s
Fan J, Jiang HL, Chen D, Zhu KJ
1222 - 1228 Alanine containing porous beads for mercury removal from artificial solutions
Senel S, Kara A, Karabakan A, Denizli A
1229 - 1238 Femtosecond-laser-assisted wet chemical etching of polymer materials
Wochnowski C, Hanada Y, Cheng Y, Metev S, Vollertsen F, Sugioka K, Midorikawa K
1239 - 1246 Preparation of poly(lactic acid) fiber by dry-jet-wet-spinning. I. Influence of draw ratio on fiber properties
Gupta B, Revagade N, Anjum N, Atthoff B, Hilborn J
1247 - 1254 Synthesis and characterization of poly(butylene terephthalate) nanocomposite fibers: Thermo-mechanical properties and morphology
Chang JH, Mun MK
1255 - 1261 Morphology and mechanical properties of blends of linear low density polyethylene and poly(ethenepropene-1-butene)
Quental AC, Felisberti MI
1262 - 1268 Characteristics of methacrylic acid-grafted polyethylene films prepared by photografting in the presence of polyfunctional monomers
Kubota H, Kojima M, Kuroda SI
1269 - 1276 Effect of temperature on electrical behavior of flyash-filled epoxy gradient composites
Chand N, Jain D
1277 - 1281 Characterization of the aging behavior of raw epoxidized natural rubber with a rubber processing analyzer
Wang PY, Qian HL, Yang CL, Ying-Chen
1282 - 1288 Influence of poly(ethylene glycol)-containing additives on extrusion of ultrahigh molecular weight polyethylene/polypropylene blend
Xie MJ, Liu XL, Li HL
1289 - 1293 Synthesis and magnetic properties of novel complexes of poly(N-2-thiazolylmethacrylamide) with Nd(III), Pr(III), and Sm(III)
Zheng P, Sun WL, Shen ZQ
1294 - 1298 Local microstructure characterization of rare earth-doped PMMA with low-ion content by fluorescence EXAFS
Zhao H, Hu J, Zhang QJ, Bao J, Liu WH, Gao C, Lu YH
1299 - 1305 Grafting of methyl methacrylate onto Antheraea pernyi silk fiber with the assistance of Supercritical CO2
Peng Q, Xu Q, Sun DF, Sha ZZ
1306 - 1311 Evaluation of the microstructure and melting behavior of drawn polypropylene fibers with a microthermal analyzer
Ye JP, Hasegawa T, Suzuki A
1312 - 1317 Block copolymerization of poly(diethylene glycol phthalic anhydride) and methyl methacrylate initiated by potassium diperiodatonickelate(IV)
Liu YH, Bai LB, Zhou WQ, Liu YW, Li YX, Deng KL
1318 - 1322 Thermogravimetric analysis of agricultural residues: Oxygen effect and environmental impact
Simkovic I, Csomorova K
1323 - 1327 Study on in situ synthesis of konjac glucomannan/silver nanocomposites via photochemical reduction
Tian DT, Hu WB, Zheng Z, Liu HB, Xie HQ
1328 - 1334 Reactions of copper ions with amines in the presence of self-assembled fluorinated oligomeric aggregates
Sawada H, Furukuwa R, Sasazawa K, Toriba K, Ueno K, Hamazaki K
1335 - 1343 Nonisothermal crystallization of poly(ethylene-co-glycidyl methacrylate)/clay nanocomposites
Huang JW, Hung HC, Tseng KS, Kang CC
1344 - 1348 Chemical modification of nylon 6 and polyester fabrics by ozone-gas treatment
Lee M, Lee MS, Wakida T, Tokuyama T, Inoue G, Ishida S, Itazu T, Miyaji Y
1349 - 1356 Surface modification of monodisperse-crosslinked polymeric microspheres using a redox initiation system
Jung MO, Ryu JH, Park JG, Jun JB, Suh KD
1357 - 1363 Morphology and thermal behavior of MCPA6/SAN blends prepared by anionic ring-opening polymerization of epsilon-caprolactam
Hou LL, Yang G
1364 - 1371 Properties and preparation of compatibilized nylon 6 nanocomposites/ABS blends using functionlized metallocene polyolefine elastomer. I. Impact properties
Lai SM, Liao YC, Chen TW
1372 - 1377 Wrinkle resistant properties and antibacterial efficacy of cotton fabrics treated with glyoxal system and with combination of glyoxal and chitosan system
Kittinaovarat S, Kantuptim P, Singhaboonponp T
1378 - 1384 Poly(silyl ester)s: A new route of synthesis via the condensation of Di-tert-butyl ester of dicarboxylic acid with dichlorosilane
Liu ZL, Han NF, Dong JA
1385 - 1394 Separation characteristics of acetic acid-water mixtures using poly(vinyl alcohol-g-4-vinyl pyridine) membranes by pervaporation and temperature difference evapomeation techniques
Asman G, Sanli O
1395 - 1402 Synthesis of a difunctional organolithium compound as initiator for the polymerization of styrene-butadiene/isoprene-styrene triblock copolymer
Lu ZX, Xu HD, Li Y, Hu YL
1403 - 1405 Frequency-dependent conductivity and dielectric permittivity of polyaniline/CeO2 composites
Parvatikar N, Prasad MVNA
1406 - 1412 Colloidal aggregation of aminoplastic polycondensation resins: Urea-formaldehyde versus melamine-formaldehyde and melamine-urea-formaldehyde resins
Despres A, Pizzi A
1413 - 1419 Optimization of the properties of chitosan lactate/hyaluronan film
Kukolikova L, Bakos D, Alexy P, Hanzelova S, Zhong W
1420 - 1426 Methacrylic acid and dodecyl methacrylate (MAc-DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC-6375
Kanwar SS, Chauhan GS, Chimni SS, Chauhan S, Rawat GS, Kaushal RK
1427 - 1431 Synthesis and characteristics of poly(methyl methacrylate)/expanded graphite nanocomposites
Wang WP, Liu Y, Li XX, You YZ
1432 - 1442 Extrusion of feather keratin
Barone JR, Schmidt WF, Gregoire NT
1443 - 1449 Hydroxyalkylation of parabanic acid. III. Polymers from parabanic acid and ethylene carbonate
Zarzyka-Niemiec I, Narog D, Lubczak J
1450 - 1456 The adsorption of water vapor an super absorbent product at low temperatures and low mass
Bakass M, Bellat JP, Mokhlisse A, Bertrand G
1457 - 1464 Acidic hydrolysis of a poly(vinyl acetate) matrix by the catalytic effect of Ag nanoparticles and the micellization of Ag-metal-containing polymer
Huang CJ, Shieu FS, Hsieh WP, Chang TC
1465 - 1470 Mineralization of hydroxyapatite on a polymer substrate in a solution supersaturated by polyelectrolyte
Iwatsubo T, Kusumocahyo SP, Kanamori T, Shinbo T
1471 - 1478 Preparation of cellulose acetate butyrate and poly(ethylene glycol) copolymer to blend with poly(3-hydroxybutyrate)
Cheng GX, Wang TZ, Zhao Q, Ma XL, Zhang LG
1479 - 1491 Nonisothermal crystallization kinetics and morphology of self-seeded syndiotactic 1,2-polybutadiene
Cai JL, Li T, Han Y, Zhuang YQ, Zhang XQ
1492 - 1495 A high-resolution solid-state NMR investigation of molecular mobility of poly(methyl methacrylate)/poly(vinyl pyrrol idone)/poly(ethylene oxide) ternary blends
Diniz TMFF, Tavares MIB
1496 - 1505 New melamine-formaldehyde-ketone polymers. IV. Dissolution of melamine in reactive solvents prepared from methyl ethyl ketone
Glowacz-Czerwonka D, Kucharski M
1506 - 1510 Copolymers of styrene with a quaternary europium complex
Pan YF, Zheng A, Hu FZ, Xiao HN
1511 - 1521 Synthesis and characterization of poly(ethylene-co-trimethylene terephthalate)s
Wei GF, Wang LY, Chen GK, Gu LX
1522 - 1530 A study of the synthesis, kinetics, and characterization of reactive graft copolymers of poly(vinyl imidazole) and cellulose for use as supports in enzyme immobilization and metal ion uptake
Chauhan GS, Singh B, Chauhan S, Dhiman SK, Kumar D
1531 - 1537 Antibacterial property and mechanism of copolymer of acrylamide and quaternary salt of 4-vinyl pyridine
Gao BJ, He SX, Guo JF, Wang RX
1538 - 1546 Anionic dye adsorption characteristics of surfactant-modified coir pith, a'waste' lignocellulosic polymer
Namasivayam C, Sureshkumar MV
1547 - 1553 Preparation, morphology, and mechanical properties of elastomers based on alpha,omega-dihydroxy-polydimethylsiloxane/poly(methyl methacrylate) blends
Dong J, Liu ZL, Feng YB, Zheng C
1554 - 1560 Intermolecular interactions between bovine serum albumin and certain water-soluble polymers at various temperatures
Kavlak S, Guner A
1561 - 1570 Characteristics of konjac glucomannan and poly(acrylic acid) blend films for controlled drug release
Yu HQ, Huang A, Xiao CB
1571 - 1576 Effect of elastomer type and functionality on the behavior of toughened polyamide nanocomposites
Kelnar I, Kotek J, Kapralkova L, Hromadkova J, Kratochvil J
1577 - 1587 Pressure drop estimation for polyamide 6 flow through spinnerets and filters
Gustin A, Zupancic A, Mitsoulis E
1588 - 1593 Study of the preparation and properties of UV-blocking fabrics of a PET/TiO2 nanocomposite prepared by in situ polycondensation
Han KQ, Yu MH
1594 - 1600 Synthesis and characterization of reinforced acrylic-based superabsorbents crosslinked with divinylbenzene
Huang J, Huang ZM, Bao YZ, Weng ZX
1601 - 1606 Photopolymerization of methyl methacrylate by 2,2'-dithiodiethanol: Effect of reaction conditions
Baruah SR, Kakati DK
1607 - 1617 Preparation and characterization of EVA-sisal fiber composites
Malunka ME, Luyt AS, Krump H
1618 - 1623 Coagulation and sedimentation of bacteria using a highly biodegradable polymeric coagulant
Kawabata N, Fuse T
1624 - 1632 The reaction in water of UF resins with isocyanates at short curing times: A C-13 NMR investigation
Wieland S, Pizzi A, Hill S, Grigsby W, Pichelin F
1633 - 1641 Poly(epsilon-caprolactone)-grafted acetylated anhydroglucose oligomer by ring-opening polymerization - Synthesis and characterization
Gadda T, Kylma J, Tuominen J, Mikkonen H, Laine A, Peltonen S, Seppala J
1642 - 1650 Cure kinetics of aqueous phenol-formaldehyde resins used for oriented strandboard manufacturing: Analytical technique
Lei Y, Wu Q, Lian K
1651 - 1658 Comparison of propylene/ethylene copolymers prepared with different catalysts
Stephens CH, Poon BC, Ansems P, Chum SP, Hiltner A, Baer E
1659 - 1663 A microindentation study of polyethylene composites produced by hot compaction
Orench IP, Calleja FJB, Hine PJ, Ward IM
1664 - 1667 Study on the electrodriven action of gelatin hydrogel in silicone oil
Liu GQ, Zhao XP
1668 - 1672 Cationization of cellulose fabrics by polyallylamine binding
Wu M, Kuga SN
1673 - 1680 Hydroxymethylation and polycondensation reactions in urea-formaldehyde resin synthesis
Christjanson P, Pehk T, Siimer K
1681 - 1687 Ring-opening polymerization of styrene oxide with maghnite-H+ as ecocatalyst
Yahiaoui A, Belbachir M
1688 - 1704 Synthetic preparations and physical and electrical properties of main chain type thermotropic liquid crystalline polyimide/SiO2 nanocomposites
Ho CY, Lee JY