1 - 12 |
Contemporary low-emissions hydrogen-based energy market in Poland: Issues and opportunities, part I Stygar M, Brylewski T |
13 - 24 |
Contemporary low-emissions hydrogen-based energy market in Poland: Issues and opportunities, part II Stygar M, Brylewski T |
25 - 37 |
H2O-based solid fuel power source based on the catalysis of H by HOH catalyst Mills R, Lotoski J |
38 - 50 |
A detailed techno-economic analysis of heat integration in high temperature electrolysis for efficient hydrogen production Buttler A, Koltun R, Wolf R, Spliethoff H |
51 - 61 |
Ni-Co electrodes prepared by electroless-plating deposition. A study of their electrocatalytic activity for the hydrogen and oxygen evolution reactions Perez-Alonso FJ, Adan C, Rojas S, Pena MA, Fierro JLG |
62 - 69 |
State-of-health of a CuCl electrolyzer during a 168-h test Khurana S, Hall DM, Schatz RS, Fedkin MV, Lvov SN |
70 - 74 |
Low emission hydrogen generation through carbon assisted electrolysis Giddey S, Kulkarni A, Badwal SPS |
75 - 84 |
Direct steam reforming of diesel and diesel-biodiesel blends for distributed hydrogen generation Martin S, Kraaij G, Ascher T, Baltzopoulou P, Karagiannakis G, Wails D, Worner A |
85 - 94 |
Sulphur trioxide decomposition with supported platinum/palladium on rutile catalysts: 1. Reaction kinetics of catalyst pellets Everson RC, Stander BF, Neomagus HWJP, van der Merwe AF, le Grange L, Tietz MR |
95 - 105 |
An experimental investigation of biodiesel steam reforming Martin S, Kraaij G, Ascher T, Wails D, Worner A |
106 - 113 |
H-2 production by thermal decomposition of H2S in the presence of oxygen Palma V, Vaiano V, Barba D, Colozzi M, Palo E, Barbato L, Cortese S |
114 - 124 |
Improved operation of solar reactor for two-step water-splitting H-2 production by ceria-coated ceramic foam device Cho HS, Gokon N, Kodama T, Kang YH, Lee HJ |
125 - 135 |
The interplay between renewables penetration, costing and emissions in the sizing of stand-alone hydrogen systems Brka A, Al-Abdeli YM, Kothapalli G |
136 - 145 |
CdS-loaded flexible carbon nanofiber mats as a platform for solar hydrogen production Kim YK, Kim M, Hwang SH, Lim SK, Park H, Kim S |
146 - 150 |
Efficient chemical regeneration of LiBH4 center dot NH3 spent fuel for hydrogen storage Tan YB, Chen XW, Xia GL, Yu XB |
151 - 160 |
Microscopic analysis of wheat straw cell wall degradation by microbial consortia for hydrogen production Perez-Rangel M, Quiroz-Figueroa FR, Gonzalez-Castaneda J, Valdez-Vazquez I |
161 - 167 |
Characteristics and kinetics of biohydrogen production with Ni2+ using hydrogen-producing bacteria Gou CY, Guo JB, Lian J, Guo YK, Jiang ZS, Yue L, Yang JL |
168 - 175 |
A two-stage process for hydrogen production from cheese whey: Integration of dark fermentation and biocatalyzed electrolysis Moreno R, Escapa A, Cara J, Carraceclo B, Gomez X |
176 - 183 |
Biohydrogen production via the interaction of nitrogenase and anaerobic mixed-acid fermentation in marine bacteria Ma YC, Huang AY, Zhu DL, Pan GH, Wang GC |
184 - 196 |
Assessment of five different cathode materials for Co(II) reduction with simultaneous hydrogen evolution in microbial electrolysis cells Wang Q, Huang LP, Yu HT, Quan X, Li YX, Fan GF, Li L |
197 - 208 |
A comparison of different pretreatments on hydrogen fermentation from waste sludge by fluorescence excitation-emission matrix with regional integration analysis Guo L, Lu MM, Li QQ, Zhang JW, She ZL |
209 - 218 |
Optimization of substrate composition for biohydrogen production from buffalo slurry co-fermented with cheese whey and crude glycerol, using microbial mixed culture Marone A, Varrone C, Fiocchetti F, Giussani B, Izzo G, Mentuccia L, Rosa S, Signorini A |
219 - 232 |
Experimental study of the application of a NiO/NiAl2O4 catalyst and a CaO-based synthetic sorbent on the Sorption on the Sorption Enhanced Reforming process Garcia-Lario AL, Aznar M, Martinez I, Grasa GS, Murillo R |
233 - 243 |
Hydrogen production in Multi-Channel Membrane Reactor via Steam Methane Reforming and Methane Catalytic Combustion Vigneault A, Grace JR |
244 - 255 |
Hydrogen production from methanol steam reforming using porous copper fiber sintered felt with gradient porosity Zhou W, Wang QH, Li JR, Tang Y, Huang ZM, Zhang JP, Lu Q |
256 - 274 |
Electrocatalysis developments for hydrogen evolution reaction in alkaline solutions - A Review Safizadeh F, Ghali E, Houlachi G |
275 - 283 |
Electrocatalytic oxidation of methanol on ordered binary catalyst of manganese and nickel oxide nanoparticles Tammam RH, Fekry AM, Saleh MM |
284 - 291 |
Supported Pt-based nanoparticulate catalysts for the electro-oxidation of methanol: An experimental protocol for quantifying its activity Hernandez-Fernandez P, Lund PB, Kallesoe C, Clausen HF, Christensen LH |
292 - 302 |
Synthesis of Pt-Cu/poly (o-Anisidine) nanocomposite onto carbon paste electrode and its application for methanol oxidation Hosseini SR, Raoof JB, Ghasemi S, Gholarni Z |
303 - 310 |
Non-noble metal copper nanoparticles-decorated TiO2 nanotube arrays with plasmon-enhanced photocatalytic hydrogen evolution under visible light Zhang SS, Peng BY, Yang SY, Wang HG, Yu H, Fang YP, Peng F |
311 - 321 |
Polyol synthesis of nickel-copper based catalysts for hydrogen production by methane decomposition Shen Y, Lua AC |
322 - 329 |
Synthesis of Pd nanoparticles supported on PDDA functionalized graphene for ethanol electro-oxidation Fan YF, Zhao YC, Chen DH, Wang X, Peng XL, Tian JN |
330 - 339 |
DFT study of bio-oil decomposition mechanism on a Co stepped surface: Acetic acid as a model compound Li XB, Wang SR, Zhu YY, Yang GH, Zheng PJ |
340 - 345 |
Nickel nanoparticles modified CdS - A potential photocatalyst for hydrogen production through water splitting under visible light irradiation Wang H, Chen W, Zhang J, Huang CP, Mao LQ |
346 - 352 |
Adsorption and dissociation of ammonia on small iron clusters Zhang XL, Lu ZS, Ma DW, Yang ZX |
353 - 362 |
Photocatalytic hydrogen evolution over Erythrosin B-sensitized graphitic carbon nitride with in situ grown molybdenum sulfide cocatalyst Xu JY, Li YX, Peng SQ |
363 - 372 |
Synthesis and characterization of high temperature proton exchange membrane from isocyanatopropyltriethoxysilane and hydroxyethane diphosphonic acid Shen CH, Kong GJ, Wang J, Zhang X |
373 - 382 |
Heat treatment driven surface segregation in Pd77Ag23 membranes and the effect on hydrogen permeability Lai TM, Lind ML |
383 - 391 |
Spin conversion of hydrogen over LaFeO3/Al2O3 catalysts at low temperature: Synthesis, characterization and activity Das T, Kweon SC, Choi JG, Kim SY, Oh IH |
392 - 402 |
Improvement of thermal stability and reduction of LiBH4/polymer host interaction of nanoconfined LiBH4 for reversible hydrogen storage Plerdsranoy P, Wiset N, Milanese C, Laipple D, Marini A, Klassen T, Dornheim M, Utike RG |
403 - 411 |
Hydrogen storage in heat welded random CNT network structures Ozturk Z, Baykasoglu C, Celebi AT, Kirca M, Mugan A, To AC |
412 - 419 |
Synthesis, structures and dehydrogenation of magnesium borohydride-ethylenediamine composites Chen J, Chua YS, Wu H, Xiong ZT, He T, Zhou W, Ju XH, Yang MH, Wu GT, Chen P |
420 - 428 |
Computational investigation of hydrogen storage on scandium-acetylene system Ma LJ, Jia JF, Wu HS |
429 - 434 |
Synthesis and hydrogen storage properties of lithium borohydride urea complex Liu L, Wu GT, Chen WD, Xiong ZT, He T, Chen P |
435 - 443 |
A thermodynamic irreversibility based design method for multi-contaminant hydrogen networks Lou JY, Liao ZW, Jiang BB, Wang JD, Yang YR |
444 - 450 |
Thermodynamics and kinetics of hydrogen/deuterium absorption-desorption in Pd0.77Ag0.23 alloy Anand NS, Pati S, Jat RA, Parida SC, Mukerjee SK |
451 - 455 |
Enhanced discharge capacity and cycling properties in high-samarium, praseodymium/neodymium-free, and low-cobalt A(2)B(7) electrode materials for nickel-metal hydride battery Cao ZJ, Ouyang LZ, Li LL, Lu YS, Wang H, Liu JW, Min D, Chen YW, Xiao FM, Sun T, Tang RH, Zhu M |
456 - 476 |
Dynamic modeling and analysis of a 5-kW solid oxide fuel cell system from the perspectives of cooperative control of thermal safety and high efficiency Zhang L, Li X, Jiang JH, Li SH, Yang J, Li J |
477 - 487 |
Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell Ilbeygi H, Ghasemi M, Emadzadeh D, Ismail AF, Zaidi SMJ, Aljlil SA, Jaafar J, Martin D, Keshani S |
488 - 500 |
The effective carbon supported core-shell structure of Ni@Au catalysts for electro-oxidation of borohydride Duan DH, Liang JW, Liu HH, You X, Wei HK, Wei GQ, Liu SB |
501 - 508 |
Enhanced performance of solid oxide fuel cells by introducing a transition layer between nanostructured cathode and electrolyte Zhu KY, Liu HY, Zhu XF, Liu Y, Yang WS |
509 - 518 |
Novel way of phase stability of LSGM and its conductivity enhancement Biswal RC, Biswas K |
519 - 537 |
Investigation of the interactions between proton exchange membrane fuel cell and interleaved DC/DC boost converter in case of power switch faults Guilbert D, Gaillard A, Mohammadi A, N'Diaye A, Djerdir A |
538 - 548 |
Comparative performance analysis of a hybrid PV/FC/battery stand-alone system using different power management strategies and sizing approaches Behzadi MS, Niasati M |
549 - 560 |
Effect of Pt-Cs2.5H0.5PW12O40 catalyst addition on durability of self-humidifying nanocomposite membranes based on sulfonated poly (ether ether ketone) for proton exchange membrane fuel cell applications Rowshanzamir S, Peighambardoust SJ, Parnian MJ, Amirizhanlou GR, Rahnavard A |
561 - 567 |
Performance and stability of co-synthesized Sm0.5Sr0.5CoO3-Ce0.8Sm0.2O1.9 composite oxygen electrode for solid oxide electrolysis cells Jiang W, Wei B, Lv Z, Wang ZH, Zhu L, Li YQ |
568 - 576 |
Comparative study of aliphatic alcohols electrooxidation on zero-valent palladium complex for direct alcohol fuel cells Zhiani M, Majidi S, Rostami H, Taghiabadi MM |
577 - 592 |
Flow distribution analyzing for the solid oxide fuel cell short stacks with rectangular and discrete cylindrical rib configurations Su SC, He HH, Chen DF, Zhu W, Wu YX, Kong W, Wang B, Lu L |
593 - 606 |
A nonlinear sliding mode observer for the estimation of temperature distribution in a planar solid oxide fuel cell Cheng H, Li X, Jiang JH, Deng ZH, Yang J, Li J |
607 - 614 |
Fabrication of Co3O4 and La0.6Sr0.4CoO3-delta-Ce0.8Gd0.2O2-delta dual layer coatings on SUS430 steel by in-situ phase formation for solid oxide fuel cell interconnects Yang XL, Tu HY, Yu QC |
615 - 622 |
Model based temperature controller development for water cooled PEM fuel cell systems Saygili Y, Eroglu I, Kincal S |
623 - 632 |
Techno-economic study of a PV-hydrogen-battery hybrid system for off-grid power supply: Impact of performances' ageing on optimal system sizing and competitiveness Guinot B, Champel B, Montignac F, Lemaire E, Vannucci D, Sailer S, Bultel Y |
633 - 641 |
Energy management for fuel cell hybrid vehicles based on a stiffness coefficient model Yun HT, Liu SD, Zhao YL, Xie JX, Liu C, Hou ZJ, Wang KY |
642 - 651 |
Parameters affecting CO2 production in a planar anode supported SOFC based system Alenazey F, Alyousef Y, Brancaccio E, Montinaro D |
652 - 664 |
The effects of compression on single and multiphase flow in a model polymer electrolyte membrane fuel cell gas diffusion layer Tranter TG, Burns AD, Ingham DB, Pourkashanian M |
665 - 669 |
On the tortuosity factor of solid phase in solid oxide fuel cell electrodes Zheng KQ, Zhang YX, Li L, Ni M |
670 - 674 |
Synthesis of Cu2S/carbon composites with improved lithium storage performance Liu Y, Jin B, Zhu YF, Ma XZ, Lang XY |
675 - 682 |
Design and heat transfer characteristics analysis of combined active and passive thermal protection system for hydrogen fueled scramjet Zhang C, Qin J, Yang QC, Zhang SL, Bao W |
683 - 691 |
IDDES simulation of hydrogen-fueled supersonic combustion using flamelet modeling Wang HS, Shan FL, Piao Y, Hou LY, Niu J |
692 - 702 |
An experimental investigation on the performance characteristics of a hydroxygen enriched gasoline engine with water injection Karagoz Y, Yuksek L, Sandalci T, Dalkilic AS |
703 - 718 |
Kinetic analysis of H-2 addition effect on the laminar flame parameters of the C1-C4 n-alkane-air mixtures: From one step overall assumption to detailed reaction mechanism Cheng Y, Tang CL, Huang ZH |
719 - 728 |
Qualification of chromium-molybdenum steel based on the safety factor multiplier method in CHMC1-2014 Yamabe J, Matsunaga H, Furuya Y, Hamada S, Itoga H, Yoshikawa M, Takeuchi E, Matsuoka S |
729 - 734 |
Hydrogen sensing performance of a nickel oxide (NiO) thin film-based device Chou PC, Chen HI, Liu IP, Chen CC, Liou JK, Hsu KS, Liu WC |
735 - 745 |
CFD analysis of fast filling strategies for hydrogen tanks and their effects on key-parameters Melideo D, Baraldi D |
746 - 751 |
A reliable and fast hydrogen gas leakage detector based on irreversible cracking of decorated palladium nanolayer upon aligned polymer fibers Chen R, Ruan XD, Liu WT, Stefanini C |
753 - 753 |
Selected Papers from the 1st International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications (ICNNT 2014) Preface Aliofkhazraei M, Ali N, Darr J, Lund P |
754 - 759 |
Synthesis of manganese oxide/activated carbon composites for supercapacitor application using a liquid phase plasma reduction system Lee H, Park SH, Kim SJ, Park YK, Kim BJ, An KH, Ki SJ, Jung SC |
760 - 766 |
Synthesis and characterization of B-site doped La0.20Sr0.25Ca0.45TiO3 as SOFC anode materials Yaqub A, Janjua NK, Savaniu C, Irvine JTS |
767 - 778 |
Reduced graphene oxide composites with MWCNTs and single crystalline hematite nanorhombohedra for applications in water purification Pawar RC, Choi DH, Lee CS |
779 - 785 |
Hydrogen-evolving photoanode of TiO2 nanoparticles film deposited by a femtosecond laser Sang LX, Zhang HJ, Ni XC, Anoop KK, Fittipaldi R, Wang X, Amoruso S |
786 - 796 |
Guanidine functionalized radiation induced grafted anion-exchange membranes for solid alkaline fuel cells Sherazi TA, Zahoor S, Raza R, Shaikh AJ, Naqvi SAR, Abbas G, Khan Y, Li SH |
797 - 805 |
Solvothermal synthesis of Cu2ZnSnS4 nanocrystalline thin films for application of solar cells Wei AX, Yan ZQ, Zhao Y, Zhuang MX, Liu J |
806 - 814 |
Morphology-controlled growth of special nanostructure CuInS2 thin films on an FTO substrate and their application in thin film solar cells Zhuang MX, Wei AX, Zhao Y, Liu J, Yan ZQ, Liu Z |
815 - 824 |
Importance of the electronic structure of modified TiO2 in the photoelectrochemical processes of hydrogen generation Zakrzewska K, Kollbek K, Sikora M, Kapusta C, Szlachetko J, Sitarz M, Ziabka M, Radecka M |
825 - 832 |
Photoluminescence properties of a novel green-emitting phosphor Zr1-xO2:xTb(3+) Yoon SJ, Park K |
833 - 840 |
Electrochemical properties of PEM fuel cells based on Nafion-polybenzimidazole-imidazole hybrid membranes Malinowski M, Iwan A, Parafiniuk K, Gorecki L, Pasciak G |
841 - 851 |
TiO2/SnO2 nanotubes for hydrogen generation by photoelectrochemical water splitting Radecka M, Wnuk A, Trenczek-Zajac A, Schneider K, Zakrzewska K |
852 - 862 |
Characterization of ionic liquid added poly(vinyl alcohol)-based proton conducting polymer electrolytes and electrochemical studies on the supercapacitors Liew CW, Ramesh S, Arof AK |
863 - 869 |
CdS-sensitized 1-D single-crystalline anatase TiO2 nanowire arrays for photoelectrochemical hydrogen production Kim DH, Han HS, Cho IS, Seong WM, Park IJ, Park JH, Shin S, Do Park G, Park S, Lee S, Hong KS |
870 - 877 |
Synthesis and characterization of iron-based catalyst on mesoporous titania for photo-thermal F-T synthesis Yu SY, Zhang T, Xie YH, Wang QH, Gao XC, Zhang RF, Zhang L, Su HQ |
878 - 890 |
Modulating the operation temperature window of CO preferential oxidation in H-2-rich gases on three dimensionally ordered macroporous CeO2-CuO catalysts by tuning their composition and incooperating Fe2O3 and CO3O4 Hou HT, Liu Y, Liu BC, Jing P, Gao YX, Zhang L, Niu PH, Wang Q, Zhang J |
891 - 897 |
Synthesize and characterization of nanocomposite anodes for low temperature solid oxide fuel cell Abbas G, Raza R, Khan MA, Ahmad I, Chaudhry MA, Sherazi TA, Mohsin M, Ahmad M, Zhu B |