10827 - 10832 |
Room temperature hydrogen production from water in auto-electrolytic process Kundu A, Gil JH, Jang JH, Lee HR, Jung CR, Ku BS, Chae KS |
10833 - 10841 |
H-2 production by PEM electrolysis, assisted by textile effluent treatment and a solar photovoltaic cell Navarro-Solis I, Villalba-Almendra L, Alvarez-Gallegos A |
10842 - 10850 |
Comparative performance analysis of PEM and solid oxide steam electrolysers Nieminen J, Dincer I, Naterer G |
10851 - 10858 |
Evaluation and calculation on the efficiency of a water electrolysis system for hydrogen production Zhang HC, Lin GX, Chen JC |
10859 - 10866 |
Hydrogen evolution by a low cost photocatalyst: Bauxite residue Mangrulkar PA, Joshi MV, Kamble SP, Labhsetwar NK, Rayalu SS |
10867 - 10882 |
Efficient STEP (solar thermal electrochemical photo) production of hydrogen - an economic assessment Licht S, Chitayat O, Bergmann H, Dick A, Ayub H, Ghosh S |
10883 - 10889 |
Nanostructured Zn-Fe2O3 thin film modified by Fe-TiO2 for photoelectrochemical generation of hydrogen Sharma P, Kumar P, Deva D, Shrivastav R, Dass S, Satsangi VR |
10890 - 10897 |
Membrane electrode assembly-based photoelectrochemical cell for hydrogen generation Jeng KT, Liu YC, Leu YF, Zeng YZ, Chung JC, Wei TY |
10898 - 10904 |
Application of activated aluminum powder for generation of hydrogen from water Rosenband V, Gany A |
10905 - 10926 |
Canada's program on nuclear hydrogen production and the thermochemical Cu-Cl cycle Naterer GF, Suppiah S, Stolberg L, Lewis M, Wang Z, Daggupati V, Gabriel K, Dincer I, Rosen MA, Spekkens P, Lvov SN, Fowler M, Tremaine P, Mostaghimi J, Easton EB, Trevani L, Rizvi G, Ikeda BM, Kaye MH, Lu L, Pioro I, Smith WR, Secnik E, Jiang J, Avsec J |
10927 - 10933 |
Modeling and monitoring of the acclimatization of conventional activated sludge to a biohydrogen producing culture by biokinetic control Fernandez-Morales FJ, Villasenor J, Infantes D |
10934 - 10943 |
Hydrogen recovery from the electrocoagulation treatment of dye-containing wastewater Phalakornkule C, Sukkasem P, Mutchimsattha C |
10944 - 10953 |
Sequential dark-photo fermentation and autotrophic microalgal growth for high-yield and CO2-free biohydrogen production Lo YC, Chen CY, Lee CM, Chang JS |
10954 - 10959 |
Effect of changing temperature on anaerobic hydrogen production and microbial community composition in an open-mixed culture bioreactor Karadag D, Puhakka JA |
10960 - 10966 |
Scale-up and optimization of biohydrogen production reactor from laboratory-scale to industrial-scale on the basis of computational fluid dynamics simulation Wang X, Ding J, Guo WQ, Ren NQ |
10967 - 10976 |
Plasma-controlled chemistry in plasma reforming of methane Lee DH, Kim KT, Cha MS, Song YH |
10977 - 10983 |
Production of hydrogen and carbon nanofibers through the decomposition of methane over activated carbon supported Pd catalysts Prasad JS, Dhand V, Himabindu V, Anjaneyulu Y, Jain PK, Padya B |
10984 - 10993 |
Mathematical modeling of a multi-stage naphtha reforming process using novel thermally coupled recuperative reactors to enhance aromatic production Iranshahi D, Bahmanpour AM, Pourazadi E, Rahimpour MR |
10994 - 11003 |
Performance and economics of a Pd-based planar WGS membrane reactor for coal gasification Dolan MD, Donelson R, Dave NC |
11004 - 11008 |
A facile two-step synthesis and dehydrogenation properties of NaAlH4 catalyzed with Co-B Wang YP, Ren QL, Wang YJ, Li L, Song DW, Jiao LF, Yuan HT |
11009 - 11015 |
Biological impact tests on complex hydrides used as hydrogen storage materials Tanaka H, Tokoyoda K, Matsumoto M, Kiyobayashi T, Kuriyama N |
11016 - 11024 |
Influence of annealing treatment on the hydrogen storage properties of La2-xTixMgNi9 (x=0.2, 0.3) alloys Jiang WQ, Lan ZQ, Wei WL, Liu YX, Guo J |
11025 - 11034 |
Investigation on electrochemical performances of melt-spun nanocrystalline and amorphous Mg2Ni1-xMnx (x=0-0.4) electrode alloys Zhang YH, Qi Y, Ma ZH, Cai Y, Guo SH, Wang XL |
11035 - 11041 |
Self-ignition combustion synthesis of LaNi5 utilizing hydrogenation heat of metallic calcium Yasuda N, Sasaki S, Okinaka N, Akiyama T |
11042 - 11051 |
Novel experimental methods for assessment of hydrogen storage capacity and modelling of sorption in Cu-BTC Khvostikova O, Assfour B, Seifert G, Hermann H, Horst A, Ehrenberg H |
11052 - 11063 |
On the selection of metal foam volume fraction for hydriding time minimization of metal hydride reactors Tsai ML, Yang TS |
11064 - 11070 |
In situ X-ray study of ammonia borane at high pressures Chen JH, Couvy H, Liu HZ, Drozd V, Daemen LL, Zhao YS, Kao CC |
11071 - 11076 |
Experimental investigation on lithium borohydride hydrolysis Goudon JP, Bernard F, Renouard J, Yvart P |
11077 - 11084 |
Hydrogen generation from catalytic hydrolysis of sodium borohydride solution using Cobalt-Copper-Boride (Co-Cu-B) catalysts Ding XL, Yuan XX, Jia C, Ma ZF |
11085 - 11098 |
Hydrogen fuel tanks for subsonic transport aircraft Verstraete D, Hendrick P, Pilidis P, Ramsden K |
11099 - 11106 |
Short term scheduling of multiple grid-parallel PEM fuel cells for microgrid applications El-Sharkh MY, Rahman A, Alam MS |
11107 - 11118 |
Effect of cyclic compression on structure and properties of a Gas Diffusion Layer used in PEM fuel cells Radhakrishnan V, Haridoss P |
11119 - 11128 |
In-situ visualization of liquid water in an operating PEMFC by soft X-ray radiography Sasabe T, Tsushima S, Hirai S |
11129 - 11137 |
Effect of catalytic ink on sub-freezing endurance of PEMFCs Song W, Yu HM, Hao LX, Yi BL, Shao ZG |
11138 - 11147 |
Experimental analysis of dynamic characteristics on the PEM fuel cell stack by using Taguchi approach with neural networks Yu WL, Wu SJ, Shiah SW |
11148 - 11153 |
Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions Chun JH, Park KT, Jo DH, Lee JY, Kim SG, Lee ES, Jyoung JY, Kim SH |
11154 - 11160 |
An improved dynamic voltage model of PEM fuel cell stack Hou YP, Yang ZH, Wan G |
11161 - 11171 |
Fuel cell and ultra-capacitor hybridization: A prototype test bench based analysis of different energy management strategies for vehicular applications Vural B, Boynuegri AR, Nakir I, Erdinc I, Balikci A, Uzunoglu M, Gorgun H, Dusmez S |
11172 - 11179 |
Composite membranes based on a novel benzimidazole grafted PEEK and SPEEK for fuel cells Li HT, Zhang G, Ma WJ, Zhao CJ, Zhang Y, Han MM, Zhu J, Liu ZG, Wu J, Na H |
11180 - 11187 |
Surface modified Ni foam as current collector for syngas solid oxide fuel cells with perovskite anode catalyst Fu XZ, Melnik J, Low QX, Luo JL, Chuang KT, Sanger AR, Yang QM |
11188 - 11193 |
Effect of anode and Boudouard reaction catalysts on the performance of direct carbon solid oxide fuel cells Tang YB, Liu JA |
11194 - 11199 |
Performance of solid oxide fuel cells based on proton-conducting BaCe0.7In0.3-xYxO3-delta electrolyte Zhao F, Chen FL |
11200 - 11207 |
Effects of transition metal oxides on the densification of thin-film GDC electrolyte and on the performance of intermediate-temperature SOFC Fu CJ, Liu QL, Chan SH, Ge XM, Pasciak G |
11208 - 11215 |
Thermo-economic modeling of a solid oxide fuel cell/gas turbine power plant with semi-direct coupling and anode recycling Cheddie DF, Murray R |
11216 - 11228 |
Development of Fe-Ni/YSZ-GDC electrocatalysts for application as SOFC anodes: XRD and TPR characterization and evaluation in the ethanol steam reforming reaction Fiuza RD, da Silva MA, Boaventura JS |
11229 - 11236 |
A direct borohydride fuel cell employing a sago gel polymer electrolyte Jamaludin A, Ahmad Z, Ahmad ZA, Mohamad AA |
11237 - 11244 |
A highly active Ni-Al2O3 catalyst prepared by homogeneous precipitation using urea for internal reforming in a molten carbonate fuel cell (MCFC): Effect of the synthesis temperature Jung YS, Yoon WL, Lee TW, Rhee YW, Seo YS |
11245 - 11253 |
Effect of carbon black additive in Pt black cathode catalyst layer on direct methanol fuel cell performance Wang GX, Sun GQ, Wang Q, Wang SL, Sun H, Xin Q |
11254 - 11260 |
Effect of RuO2 center dot xH(2)O in anode on the performance of direct methanol fuel cells Zhu S, Wang SL, Gao Y, Jiang LH, Sun H, Sun GQ |
11261 - 11270 |
Combinatorial investigation of Pt-Ru-Sn alloys as an anode electrocatalysts for direct alcohol fuel cells Chu YH, Shul YG |
11271 - 11283 |
Dynamic competition between plug-in hybrid and hydrogen fuel cell vehicles for personal transportation Bento N |
11284 - 11290 |
Comparative requirements for electric energy for production of hydrogen fuel and/or recharging of battery electric automobile fleets in New Zealand and the United States Kruger P, Leaver JD |
11291 - 11307 |
Study of nonlinear control schemes for an automotive traction PEM fuel cell system Al-Durra A, Yurkovich S, Guezennec Y |
11308 - 11314 |
Feasibility analysis for solid oxide fuel cells as a power source for railroad road locomotives Schroeder DJ, Majumdar P |
11315 - 11323 |
Design, elaboration and characterization of a Ni-MH battery prototype Cuscueta DJ, Ghilarducci AA, Salva HR |
11324 - 11331 |
Effect of hydrogen on hydrogen-methane turbulent non-premixed flame under MILD condition Mardani A, Tabejamaat S |
11332 - 11341 |
Effects of ammonia substitution on hydrogen/air flame propagation and emissions Lee JH, Lee SI, Kwon OC |
11342 - 11348 |
Burning rates and surface characteristics of hydrogen-enriched turbulent lean premixed methane-air flames Guo HS, Tayebi B, Galizzi C, Escudie D |
11349 - 11356 |
An experimental investigation of H-2 emissions of a 2004 heavy-duty diesel engine supplemented with H-2 Gatts T, Li H, Liew C, Liu S, Spencer T, Wayne S, Clark N |
11357 - 11365 |
An experimental investigation of the combustion process of a heavy-duty diesel engine enriched with H-2 Liew C, Li H, Nuszkowski J, Liu S, Gatts T, Atkinson R, Clark N |
11366 - 11372 |
Effect of hydroxy (HHO) gas addition on performance and exhaust emissions in compression ignition engines Yilmaz AC, Uludamar E, Aydin K |
11373 - 11377 |
Influence of high pressure hydrogen on the tensile and fatigue properties of a high strength Cu-Al-Ni-Fe alloy Michler T, Naumann J |
11378 - 11386 |
Structural stability, mechanical property and phase transition of the Ti-H system Liang CP, Gong HR |
11387 - 11396 |
Inhibition effect of newly synthesized heterocyclic organic molecules on corrosion of steel in alkaline medium containing chloride Ameer MA, Fekry AM |
11397 - 11404 |
Experimental study of the stacking sequence effect on polymer/composite multi-layers submitted to thermomechanical cyclic loadings Bertin M, Touchard F, Lafarie-Frenot MC |
11405 - 11411 |
In-situ monitoring of lowermost amounts of hydrogen desorbed from materials Lobo RFM, Berardo FMV, Ribeiro JHF |
11412 - 11423 |
Ignition propensity of hydrogen/air mixtures impinging on a platinum stagnation surface Brady K, Sung CJ, T'ien J |
11424 - 11424 |
Foreword Bermudez VDZ |
11425 - 11436 |
Effect of the relative position of oxygen-hydrogen plate channels and inlets on a PEMFC Valino L, Mustata R, Gil MI, Martin J |
11437 - 11447 |
Experimental fuel cell performance analysis under different operating conditions and bipolar plate designs Iranzo A, Munoz M, Lopez E, Pino J, Rosa F |
11448 - 11455 |
Mixed transport properties of Ce1-xSmxO2-x/2 system under fuel cell operating conditions Perez-Coll D, Aguadero A, Nunez P, Frade JR |
11456 - 11469 |
Effects of the addition of an organic polymer on the hydrolysis of sodium tetrahydroborate in batch reactors Ferreira MJF, Fernandes VR, Gales L, Rangel CM, Pinto AMFR |
11470 - 11477 |
Multi-tube Pd-Ag membrane reactor for pure hydrogen production Tosti S, Borgognoni F, Santucci A |
11478 - 11488 |
PtRuMo/C catalysts for direct methanol fuel cells: Effect of the pretreatment on the structural characteristics and methanol electrooxidation Tsiouvaras N, Martinez-Huerta MV, Paschos O, Stimming U, Fierro JLG, Pena MA |
11489 - 11498 |
Cr and Zr/Cr nitride CAE-PVD coated aluminum bipolar plates for polymer electrolyte membrane fuel cells Barranco J, Barreras F, Lozano A, Lopez AM, Roda V, Martin J, Maza M, Fuentes GG, Almandoz E |
11499 - 11504 |
Textured cermets of CeO2 (or GDC) with Co for solid oxide fuel cells anodes Ortega-San-Martin L, Pena JI, Larrea A, Gil V, Orera VM |
11505 - 11513 |
Modeling of a catalytic membrane reactor for CO removal from hydrogen streams - A theoretical study Teixeira M, Madeira LM, Sousa JM, Mendes A |
11514 - 11524 |
H-2 production by low pressure methane steam reforming in a Pd-Ag membrane reactor over a Ni-based catalyst: Experimental and modeling Iulianelli A, Manzolini G, De Falco M, Campanari S, Longo T, Liguori S, Basile A |
11525 - 11532 |
Water effect in hydrogen production from methane Acha E, Requies J, Barrio VL, Cambra JF, Guemez MB, Arias PL |
11533 - 11550 |
Numerical model for the performance prediction of a PEM fuel cell. Model results and experimental validation Iranzo A, Munoz M, Rosa F, Pino J |
11551 - 11560 |
Mass transfer in hydrogen-fed anode-supported SOFCs Garcia-Camprubi M, Fueyo N |
11561 - 11567 |
Methanol crossover reduction by Nafion modification with palladium composite nanoparticles: Application to direct methanol fuel cells Brandao L, Rodrigues J, Madeira LM, Mendes A |
11568 - 11575 |
Methane decomposition over Co thin layer supported catalysts to produce hydrogen for fuel cell Italiano G, Delia A, Espro C, Bonura G, Frusteri F |
11576 - 11581 |
Role of perfluorosulfonic ionomer as protective agent against strong adsorption of (bi)sulfate anions. Relevance in the determination of the area of Pt/C electrocatalysts Garcia-Rodriguez S, Rojas S, Vellosillo M, Pena MA, Fierro JLG, Ocon P |
11582 - 11590 |
CuO-CeO2 catalysts synthesized by various methods: Comparative study of redox properties Gurbani A, Ayastuy JL, Gonzalez-Marcos MP, Gutierrez-Ortiz MA |
11591 - 11600 |
Electroactivity of high performance unsupported Pt-Ru nanoparticles in the presence of hydrogen and carbon monoxide Velazquez-Palenzuela A, Cabot PL, Centellas F, Garrido JA, Arias C, Rodriguez RM, Brillas E |
11601 - 11608 |
Characterization of photoelectrochemical cells for water splitting by electrochemical impedance spectroscopy Lopes T, Andrade L, Ribeiro HA, Mendes A |
11609 - 11621 |
Hydrogenation of 9-ethylcarbazole as a prototype of a liquid hydrogen carrier Eblagon KM, Rentsch D, Friedrichs O, Remhof A, Zuettel A, Ramirez-Cuesta AJ, Tsang SC |
11622 - 11633 |
Glycerol steam reforming over Ni catalysts supported on ceria and ceria-promoted alumina Iriondo A, Barrio VL, Cambra JF, Arias PL, Guemez MB, Sanchez-Sanchez MC, Navarro RM, Fierro JLG |
11634 - 11641 |
Performance of carbon-supported PtPd as catalyst for hydrogen oxidation in the anodes of proton exchange membrane fuel cells Alcaide F, Alvarez G, Cabot PL, Miguel O, Querejeta A |
11642 - 11648 |
Response of a direct methanol fuel cell to fuel change Leo TJ, Raso MA, Navarro E, de la Blanca ES, Villanueva M, Moreno B |
11649 - 11660 |
Activation procedures characterization of MEA based on phosphoric acid doped PBI membranes Boaventura M, Mendes A |
11661 - 11668 |
Catalytic features of Ni/Ba-Ce-0.9-Y-0.1 catalyst to produce hydrogen for PCFCs by methane reforming Frontera P, Modafferi V, Frusteri F, Bonura G, Bottari M, Siracusano S, Antonucci PL |