화학공학소재연구정보센터

International Journal of Hydrogen Energy

International Journal of Hydrogen Energy, Vol.33, No.14 Entire volume, number list
ISSN: 0360-3199 (Print) 

In this Issue (44 articles)

3615 - 3624 Dynamic modeling of a solar hydrogen system under leakage conditions
Hwang JJ, Chang WR, Su A
3625 - 3631 A fossil-fuel based recipe for clean energy
Saxena SK, Drozd V, Durygin A
3632 - 3643 Optimizing site selection for hydrogen production in Iceland
Ingason HT, Ingolfsson HP, Jensson P
3644 - 3650 The critical conversion efficiency of light energy to hydrogen from photocatalytic water decomposition
Feng X, Mao WY, Yan W
3651 - 3659 Biohydrogen production by anaerobic co-digestion of municipal food waste and sewage sludges
Zhu HG, Parker W, Basnar R, Proracki A, Falletta P, Beland M, Seto P
3660 - 3667 Enhancement of fermentative hydrogen/ethanol production from cellulose using mixed anaerobic cultures
Lin CY, Hung WC
3668 - 3675 Numerical and experimental investigation of two-phase flow in an electrochemical cell
Aldas K, Pehlivanoglu N, Mat MD
3676 - 3687 Electrodeposition of Ni-Mo alloy coatings and their characterization as cathodes for hydrogen evolution in sodium hydroxide solution
Krstajic NV, Jovic VD, Gajic-Krstajic L, Jovic BM, Antozzi AL, Martelli GN
3688 - 3699 Thermal design of a laboratory-scale SO3 decomposer for nuclear hydrogen production
Kim CS, Hong SD, Kim YW, Kim JH, Lee WJ, Chang J
3700 - 3709 Membrane reforming in converting natural gas to hydrogen (part one)
Barbaa D, Giacobbe F, De Cesaris A, Farace A, Iaquaniellob G, Pipino A
3710 - 3718 Monolithic Pt/Ce0.8Zr0.2O2/cordierite catalysts for low temperature water gas shift reaction in the real reformate
Du XA, Gao DA, Yuan ZS, Liu N, Zhang CX, Wang SD
3719 - 3727 Characteristics of hydrogen production by a plasma-catalyst hybrid converter with energy saving schemes under atmospheric pressure
Horng RF, Huang HH, Lai MP, Wen CS, Chiu WC
3728 - 3735 Yttria-stabilized zirconia (YSZ) supported Ni-Co alloys (precursor of SOFC anodes) as catalysts for the steam reforming of ethanol
Resini C, Delgado MCH, Presto S, Alemany LJ, Riani P, Marazza R, Ramis G, Busca G
3736 - 3747 Production of hydrogen by ethanol steam reforming over catalysts from reverse microemulsion-derived nanocompounds
Liu S, Chen D, Zhang K, Li JJ, Zhao NQ
3748 - 3753 Improvement in desorption kinetics of NaAlH4 catalyzed with TiO2 nanopowder
Lee GJ, Shim JH, Cho YW, Lee KS
3754 - 3761 Improvement of hydrogen storage properties of the AB(2) Laves phase alloys for automotive application
Kandavel M, Bhat VV, Rougier A, Aymard L, Nazri GA, Tarascon JM
3762 - 3766 Enthalpy change (Delta H-0) and entropy change (Delta S-0) measurement of CeMn1-xAl1-xNi2x (x=0.00, 0.25, 0.50 and 0.75) hydrides by electrochemical P-C-T curve
Hou CP, Zhao MS, Li J, Huang L, Wang YZ, Yue M
3767 - 3785 Effect of GDL permeability on water and thermal management in PEMFCs -I. Isotropic and anisotropic permeability
Ahmed DH, Sung HJ, Bae J
3786 - 3800 Effect of GDL permeability on water and thermal management in PEMFCs -II. Clamping force
Ahmed DH, Sung HJ, Bae J
3801 - 3807 Development of a small vehicular PEM fuel cell system
Hwang JJ, Chang WR, Weng FB, Su A, Chen CK
3808 - 3817 Development of LSCF-GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte
Leng YJ, Chan SH, Liu QL
3818 - 3828 Heat and mass transfer effects in a direct methanol fuel cell: A 1D model
Oliveira VB, Falcao DS, Rangel CM, Pinto AMFR
3829 - 3836 A quick evaluating method for automotive fuel cell lifetime
Pei PC, Chang QF, Tang T
3837 - 3846 An investigation of engine performance parameters and artificial intelligent emission prediction of hydrogen powered car
Ho T, Karri V, Lim D, Barret D
3847 - 3855 Backfire prediction in a manifold injection hydrogen internal combustion engine
Liu XH, Liu FS, Zhou L, Sun BG, Schock HJ
3856 - 3862 The effect of hydrogen addition on biogas non-premixed jet flame stability in a co-flowing air stream
Leung T, Wierzba I
3863 - 3875 A simulation of the combustion of hydrogen in HCCI engines using a 3D model with detailed chemical kinetics
Liu C, Karim GA
3876 - 3885 Effect of initial pressure on laminar combustion characteristics of hydrogen enriched natural gas
Miao HY, Jiao Q, Huang ZH, Jiang DM
3886 - 3887 Comments on the paper: "hydrogen effected defects evolution in zirconium items of light-water reactors" by S.V. Ivanova
Kim YS
3888 - 3892 Comments of Y.S. Kim on the paper: "Hydrogen effected defects evolution in zirconium items of light-water reactors" by S.V. Ivanova
Ivanova SV
3893 - 3893 Advanced materials for applications in clean power systems: Status and challenges
Yang ZG, Weil KS, Brady MP, Sohn YH
3894 - 3902 Progress in the US DOE fuel cell subprogram efforts in polymer electrolyte fuel cells
Marcinkoski J, Kopasz JP, Benjamin TG
3903 - 3914 High-performance membrane supports: A colloidal approach to the consolidation of coarse particles
Mottern ML, Chiu WV, Warchol ZT, Shqau K, Verweij H
3915 - 3924 Comparisons between MgH(2)- and LiH-containing systems for hydrogen storage applications
Markmaitree T, Osborn W, Shaw LL
3925 - 3929 Influence of surface treatments on microstructure and electrochemical properties of La0.7Mg0.3Ni2.4Co0.6 hydrogen-storage alloy
Xiao LL, Wang YJ, Liu Y, Song DW, Jiao LF, Yuan HT
3930 - 3937 Electrocatalytic properties of carbon supported cobalt phthalocyanine-platinum for methanol electro-oxidation
Lu YH, Reddy RG
3938 - 3944 Electrical and structural properties of nano-crystalline silicon intrinsic layers for nano-crystalline silicon solar cells prepared by very high frequency plasma chemical vapor deposition
Kumar P, Zhu F, Madan A
3945 - 3951 Mechanism for SOFC anode degradation from hydrogen sulfide exposure
Lussier A, Sofie S, Dvorak J, Idzerda YU
3952 - 3961 Mechanical properties and dual atmosphere tolerance of Ag-Al based braze
Kim JY, Choi JP, Weil KS
3962 - 3969 Anomalous oxidation of ferritic interconnects in solid oxide fuel cells
Horita T, Kshimoto H, Yamaji K, Sakai N, Xiong YP, Brito ME, Yokokawa H
3970 - 3975 Shape memory alloy/glass composite seal for solid oxide electrolyzer and fuel cells
Story C, Lu K, Reynolds WT, Brown D
3976 - 3990 Thermal stress analysis of the planar SOFC bonded compliant seal design
Weil KS, Koeppel BJ
3991 - 4000 Advanced PVD protective coatings for SOFC interconnects
Gannon P, Deibert M, White P, Smith R, Chen H, Priyantha W, Lucas J, Gorokhousky V
4001 - 4011 Effects of atmospheres on bonding characteristics of silver and alumina
Kim JY, Engelhard M, Choi JP, Weil KS