3593 - 3606 |
Time periodic flow boiling heat transfer of R-134a and associated bubble characteristics in a narrow annular duct due to flow rate oscillation Chen CA, Chang WR, Lin TF |
3607 - 3614 |
Fluid flow and heat transfer in vascularized cooling plates Cho KH, Lee J, Ahn HS, Bejan A, Kim MH |
3615 - 3628 |
Heatline analysis of heat recovery and thermal transport in materials confined within triangular cavities Basak T, Aravind G, Roy S, Balakrishnan AR |
3629 - 3637 |
A multi-layer porous wall model for coronary drug-eluting stents Pontrelli G, de Monte F |
3638 - 3654 |
Numerical and experimental data set for benchmarking hygroscopic buffering models James C, Simonson CJ, Talukdar P, Roels S |
3655 - 3669 |
Analysis of heat recovery and heat transfer within entrapped porous triangular cavities via heatline approach Basak T, Roy S, Ramakrishna D, Pandey BD |
3670 - 3676 |
Determination of annular condensation heat transfer coefficient of steam in microchannels with trapezoidal cross sections Quan XJ, Dong LN, Cheng P |
3677 - 3682 |
Effects of nanoparticles on nanofluid droplet evaporation Chen RH, Phuoc TX, Martello D |
3683 - 3691 |
Can segmented flow enhance heat transfer in microchannel heat sinks? Betz AR, Attinger D |
3692 - 3701 |
Determination of wall decay times by use of a polynomial equation Urbikain MK, Davies MG |
3702 - 3707 |
Investigation on heat transfer characteristics of aircraft icing including runback water Du YX, Gui YW, Xiao CH, Yi XA |
3708 - 3720 |
On the accuracy of the interdiffusion measurements at low and moderate Rayleigh numbers. Some computational considerations Ruiz X, Pallares J, Grau FX |
3721 - 3732 |
The effect of pulsed electric fields on horizontal tube side convective condensation Sadek H, Ching CY, Cotton J |
3733 - 3744 |
Interfacial temperature measurements, high-speed visualization and finite-element simulations of droplet impact and evaporation on a solid surface Bhardwaj R, Longtin JP, Attinger D |
3745 - 3757 |
Forced flow and convective melting heat transfer of clathrate hydrate slurry in tubes Ma ZW, Zhang P, Wang RZ, Furui S, Xi GN |
3758 - 3763 |
Investigation of multicomponent mass transfer in liquid-liquid extraction systems at microscale Chasanis P, Brass M, Kenig EY |
3764 - 3781 |
Investigation of local heat transfer coefficients in plate heat exchangers with temperature oscillation IR thermography and CFD Freund S, Kabelac S |
3782 - 3791 |
Viscous dissipation effects on thermal transport characteristics of combined pressure and electroosmotically driven flow in microchannels Sadeghi A, Saidi MH |
3792 - 3798 |
Evaporation resistance measurement with visualization for sintered copper-powder evaporator in operating flat-plate heat pipes Wong SC, Liou JH, Chang CW |
3799 - 3806 |
Transient radiative transfer in a scattering slab with variable refractive index and diffuse substrate Wang JM, Wu CY |
3807 - 3816 |
The effective thermal properties of solid foam beds: Experimental and estimated temperature profiles Edouard D, Huu TT, Huu CP, Luck F, Schweich D |
3817 - 3822 |
Multiscale analysis of moving clusters of microcontacts Jang YH, Barber JR |
3823 - 3830 |
Thermodynamic model of viscosity of hydrocarbons and their mixtures Derevich IV |
3831 - 3838 |
Empirical correlations at high Ra for steady-state free convection in 2D air-filled parallelogrammic enclosures with isothermal discrete heat sources de Maria JMG, Bairi A, Costa VAF |
3839 - 3846 |
Effect of wall roughness on shear viscosity and diffusion in nanochannels Sofos F, Karakasidis TE, Liakopoulos A |
3847 - 3854 |
Measuring of heat capacity Krastev RK |
3855 - 3861 |
A numerical analysis of slab heating characteristics in a walking beam type reheating furnace Han SH, Chang D, Kim CY |
3862 - 3873 |
Infrared thermography and numerical study of vaporization characteristics of pure and blended bio-fuel droplets Saha A, Kumar R, Basu S |
3874 - 3886 |
Experimental investigation of impingement heat transfer on a flat and dimpled plate with different crossflow schemes Xing YF, Weigand B |
3887 - 3897 |
Enhancement of forced convection heat transfer in a three-dimensional laminar channel flow with insertion of a moving block Fu WS, Huang JC, Li CG |
3898 - 3904 |
Exact solution to mass transfer in Berman flow: Application to concentration polarization combined with osmosis in crossflow membrane filtration Haldenwang P, Guichardon P, Chiavassa G, Ibaseta N |
3905 - 3913 |
Thermally induced two-phase oscillating flow inside a capillary tube Das SP, Nikolayev VS, Lefevre F, Pottier B, Khandekar S, Bonjour J |
3914 - 3927 |
Investigation of the 3D model of coupled heat and liquid moisture transfer in hygroscopic porous fibrous media Zhu QY, Xie MH, Yang J, Li Y |
3928 - 3939 |
Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall Zachar A |
3940 - 3946 |
CFD simulation of thermoacoustic cooling Zink F, Vipperman J, Schaefer L |
3947 - 3960 |
Direct numerical simulation of interphase heat and mass transfer in multicomponent vapour-liquid flows Haelssig JB, Tremblay AY, Thibault J, Etemad SG |
3961 - 3968 |
Testing and modelling of a novel ceiling panel for maintaining space relative humidity by moisture transfer Fauchoux M, Bansal M, Talukdar P, Simonson CJ, Torvi D |
3969 - 3976 |
Volumetric maximization of coolant usage in closed self-driven circuits da Silva AK, Gosselin L |
3977 - 3989 |
Numerical studies of simultaneously developing laminar flow and heat transfer in microtubes with thick wall and constant outside wall temperature Zhang SX, He YL, Lauriat G, Tao WQ |
3990 - 4001 |
Development of 30 Watt high-power LEDs vapor chamber-based plate Wang JC, Wang RT, Chang TL, Hwang DS |
4002 - 4016 |
Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries Kim SM, Mudawar I |
4017 - 4022 |
Fluence rate distribution in laser-induced interstitial thermotherapy by mesh free collocation Xu XA, Meade A, Bayazitoglu Y |
4023 - 4038 |
Flow pattern and heat transfer characteristics of R-134a refrigerant during flow boiling in a horizontal circular mini-channel Saisorn S, Kaew-On J, Wongwises S |
4039 - 4046 |
Thermal properties of particulate TIMs in squeeze flow Khiabani RH, Joshi Y, Aidun CK |
4047 - 4059 |
The peridynamic formulation for transient heat conduction Bobaru F, Duangpanya M |
4060 - 4070 |
Towards optimization of a pyroelectric energy converter for harvesting waste heat Navid A, Vanderpool D, Bah A, Pilon L |
4071 - 4081 |
Generalized radiative transfer equation for porous medium upscaling: Application to the radiative Fourier law Taine J, Bellet F, Leroy V, Iacona E |
4082 - 4091 |
Melting in a vertical cylindrical tube: Numerical investigation and comparison with experiments Shmueli H, Ziskind G, Letan R |
4092 - 4100 |
Flow structure, wall pressure and heat transfer characteristics of impinging annular jet with/without steady swirling Yang HQ, Kim T, Lu TJ, Ichimiya K |
4101 - 4111 |
Effect of heat transfer on the instabilities and transitions of supercritical CO2 flow in a natural circulation loop Chen L, Zhang XR, Yamaguchi H, Liu ZS |
4112 - 4122 |
Natural convective flow and heat transfer of supercritical CO2 in a rectangular circulation loop Zhang XR, Chen L, Yamaguchi H |
4123 - 4131 |
Hydrodynamics and heat transfer in swirl flow under conditions of one-side heating. Part 1: Pressure drop and single-phase heat transfer Dedov AV, Komov AT, Varava AN, Yagov VV |
4132 - 4140 |
A highly accurate LGSM for severely ill-posed BHCP under a large noise on the final time data Liu CS |
4141 - 4151 |
Characterization of heat transfer modes of tube side convective condensation under the influence of an applied DC voltage Sadek H, Ching CY, Cotton J |
4152 - 4167 |
Two-dimensional unsteady forced convection heat transfer in power-law fluids from a cylinder Patnana VK, Bharti RP, Chhabra RP |
4168 - 4175 |
Turbulent large-scale structures in natural convection vertical channel flow Pallares J, Vernet A, Ferre JA, Grau FX |
4176 - 4184 |
Effects of plate temperature on heat transfer and emissions of impinging flames Li HB, Zhen HS, Leung CW, Cheung CS |
4185 - 4192 |
Study of bubble growth in water pool boiling through synchronized, infrared thermometry and high-speed video Gerardi C, Buongiorno J, Hu LW, McKrell T |
4193 - 4203 |
Modelling approaches to acoustic cavitation in transmission pipelines Ferrari A |
4204 - 4215 |
Characterization of evaporation and boiling from sintered powder wicks fed by capillary action Weibel JA, Garimella SV, North MT |
4216 - 4227 |
Fluid flow and heat transfer characteristics of the porous metallic heat sink with a conductive cylinder partially filled in a rectangular channel Jeng TM, Tzeng SC, Tang FZ |
4228 - 4232 |
Effect of static magnetic field on thermal conductivity measurement of a molten Si droplet by an EML technique: Comparison between numerical and experimental results Sugioka K, Tsukada T, Fukuyama H, Kobatake H, Awaji S |
4233 - 4237 |
Some estimates of the diffusion stress tensor and the diffusion energy for a binary mixture of water vapour and dry air Wyrwal J, Swirska J, Marynowicz A |
4238 - 4247 |
Constructal design of nanofluids Fan J, Wang LQ |
4248 - 4263 |
Numerical simulations of a second-order chemical reaction in a plane turbulent channel flow Fabregat A, Pallares J, Cuesta I, Grau FX |
4264 - 4273 |
On the analytic solution of MHD flow and heat transfer for two types of viscoelastic fluid over a stretching sheet with energy dissipation, internal heat source and thermal radiation Chen CH |
4274 - 4279 |
Pool boiling heat transfer with nano-porous surface Lee CY, Bhuiya MMH, Kim KJ |
4280 - 4286 |
Heat transfer enhancements of low volume concentration Al2O3 nanofluid and with longitudinal strip inserts in a circular tube Sundar LS, Sharma KV |
4287 - 4295 |
A new correlation and the review of two-phase flow pressure change across sudden expansion in small channels Wang CC, Tseng CY, Chen IY |
4296 - 4303 |
Transient natural convective heat transfer from a heated triangular cylinder to its air-filled coaxial cylindrical enclosure Yu ZT, Xu X, Hu YC, Fan LW, Cen KF |
4304 - 4315 |
Numerical study on mixed convection in a lid-driven cavity with non-uniform heating on both sidewalls Sivasankaran S, Sivakumar V, Prakash P |
4316 - 4325 |
Analysis of temperature gradient bifurcation in porous media - An exact solution Yang K, Vafai K |
4326 - 4332 |
Investigation of the slab heating characteristics in a reheating furnace with the formation and growth of scale on the slab surface Jang JH, Lee DE, Kim MY, Kim HG |
4333 - 4336 |
Premixed flame impingement heat transfer with induced swirl Luo DD, Zhen HS, Leung CW, Cheung CS |