화학공학소재연구정보센터

International Journal of Heat and Mass Transfer

International Journal of Heat and Mass Transfer, Vol.110 Entire volume, number list
ISSN: 0017-9310 (Print) 

In this Issue (87 articles)

1 - 6 Constructal design for helm-shaped fin with internal heat sources
Feng HJ, Chen LG, Xie ZH, Sun FR
7 - 19 Study on biomass derived activated carbons for adsorptive heat pump application
Pal A, Thu K, Mitra S, El-Sharkawy II, Saha BB, Kil HS, Yoon SH, Miyawaki J
20 - 33 Simulation of fluid-flexible body interaction with heat transfer
Park SG, Chang CB, Kim B, Sung HJ
34 - 42 Heat transfer in the film boiling regime: Single drop impact and spray cooling
Breitenbach J, Roisman IV, Tropea C
43 - 57 Mass transfer of a rising spherical bubble in the contaminated solution with chemical reaction and volume change
Jia HW, Zhang P
58 - 62 An improved lattice Boltzmann method for solid-liquid phase change in porous media under local thermal non-equilibrium conditions
Gao DY, Tian FB, Chen ZQ, Zhang DL
63 - 67 Thermal instability in a nanofluid saturated horizontal porous layer subjected to g-gitter
Govender S
68 - 79 Experimental study on transient heat transfer across critical pressure in 2 x 2 rod bundle with wire wraps
Li HB, Zhao M, Hu ZX, Gu HY, Lu DH
80 - 93 Transport properties and structure of dense methane fluid in the rough nano-channels using non-equilibrium multiscale molecular dynamics simulation
Jiang CT, Ouyang J, Wang LH, Liu QS, Wang XD
94 - 103 A lattice Boltzmann method for simulating laser cutting of thin metal plates
Zhao JN, Cheng P
104 - 112 Analysis of molten pool behavior by flux-wall guided metal transfer in low-current submerged arc welding process
Cho DW, Kiran DV, Na SJ
113 - 131 Investigation on the influence of injection direction on the spray cooling performance in natural draft dry cooling tower
Sun YB, Guan ZQ, Gurgenci H, Hooman K, Li XX, Xia L
132 - 141 A method for measuring relative in-plane diffusivity of thin and partially saturated porous media: An application to fuel cell gas diffusion layers
Tranter TG, Stogornyuk P, Gostick JT, Burns AD, Gale WF
142 - 150 Measurement of effective thermal conductivity of hydrate-bearing sediments and evaluation of existing prediction models
Wang B, Fan Z, Lv PF, Zhao JF, Song YC
151 - 165 Decoupled stabilized finite element methods for the Boussinesq equations with temperature-dependent coefficients
Zhang T, Liang HX
166 - 171 Effects of relaxation time, Philip n-diffusion and thermal diffusivity on approximate analytical solutions for Cattaneo telegraph equation with reaction term
Dangui-Mbani UO, Zheng LC, Tathy C
172 - 192 Bubble nucleation and dissolution in multicomponent fluids near a phase boundary using a rapid heat pulse
Demur R, Oukmal J, Luu G, Mousset C, Leman M, Villares G, Kerdraon M, Sullivan M, Harrison C
193 - 208 Direct simulation of conjugate heat transfer of jet in channel crossflow
Wu Z, Laurence D, Iacovides H, Afgan I
209 - 218 An efficient 1D numerical model adapted to the study of transient convecto-diffusive heat and mass transfer in directional solidification
Tavernier V, Millet S, Henry D, Botton V, Boutet G, Garandet JP
219 - 230 Heat transfer during cooling of high temperature spheres in subcooled water at different pressures
Yagov VV, Zabirov AR, Kaban'kov ON, Minko MV
231 - 247 Forced convection and thermal predictions of pulsating nanofluid flow over a backward facing step with a corrugated bottom wall
Selimefendigil F, Oztop HF
248 - 256 Experimental investigation of heat transfer and pressure drop in a straight minichannel heat sink using TiO2 nanofluid
Arshad W, Ali HM
257 - 261 Measure of bubble non-uniformity within circular region in a direct contact heat exchanger
Xiao QT, Pan JX, Lv ZH, Xu JX, Wang H
262 - 275 Computational study of multiphase flows over ventilated translating blades
Daskiran C, Liu IH, Oztekin A
276 - 293 The effect of heating area orientation on flow boiling performance in microchannels heat sink under subcooled condition
Krishnan RA, Balasubramanian KR, Suresh S
294 - 313 Recent advances in MEMS-based micro heat pipes
Qu J, Wu HY, Cheng P, Wang Q, Sun Q
314 - 318 Kinetics of high-temperature thermal treatment of boehmite-based alumina in vacuum to produce pure alumina
Lisitsyn AV, Grigorenko AV, Dombrovsky LA
319 - 329 Mesoscale simulations of boiling curves and boiling hysteresis under constant wall temperature and constant heat flux conditions
Zhang CY, Cheng P
330 - 347 Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature
Bhatt NH, Lily, Raj R, Varshney P, Pati AR, Chouhan D, Kumar A, Munshi B, Mohapatra SS
348 - 359 A volume of fluid based method for vapor-liquid phase change simulation with numerical oscillation suppression
Ding ST, Luo B, Li G
360 - 373 An experimental study of flow boiling in minichannels at high reduced pressure
Belyaev AV, Varava AN, Dedov AV, Komov AT
374 - 382 A predictive-corrective process for predicting forced convective heat transfer in heated tubes at supercritical pressures
Liu SU, Huang YP, Liu GX, Wang JF, Leung LKH
383 - 392 Experimental study on heat transfer enhancement of wavy finned flat tubes by water spray cooling
Xiao LH, Wu T, Feng SQ, Du XZ, Yang LJ
393 - 405 Numerical simulation of heat transfer in packed pebble beds: CFD-DEM coupled with particle thermal radiation
Wu H, Gui N, Yang XT, Tu JY, Jiang SY
406 - 415 Spatially resolved mass transfer coefficient for moderate Reynolds number flows in packed beds: Wall effects
Bale S, Sathe M, Ayeni O, Berrouk AS, Joshi J, Nandakumar K
416 - 421 Orientation effect of a radial heat sink with a chimney for LED downlights
Park SJ, Lee KS
422 - 436 Flow boiling heat transfer of R134a in multi microchannels
Fayyadh EM, Mahmoud MM, Sefiane K, Karayiannis TG
437 - 446 Effects of melting and heat generation/absorption on unsteady Falkner-Skan flow of Carreau nanofluid over a wedge
Khan M, Azam M, Alshomrani AS
447 - 459 A study on density stratification by mechanical extraction displacement ventilation
Lin YJP, Wu JY
460 - 466 Effect of surface heat dissipation on thermocapillary convection of low Prandtl number fluid in a shallow annular pool
Zhang L, Li YR, Wu CM
467 - 475 2-D unsteady free convective heat and mass transfer Newtonian Hartmann flow with thermal diffusion and Soret effects: Network model and finite differences
Zueco J, Ahmed S, Lopez-Gonzalez LM
476 - 481 Analytical solutions of force convective heat transfer in plate heat exchangers partially filled with metal foams
Lu W, Zhang T, Yang M, Wu YP
482 - 495 Hydraulic and heat transfer characteristics of slush hydrogen in a circular pipe under terrestrial and microgravity conditions
Ma F, Zhang P, Shi XJ
496 - 505 The influence of non-condensable gas on an integral planar heat pipe radiators for space applications
Lee KL, Kadambi JR, Kamotani Y
506 - 514 Magnetohydrodynamic (MHD) nonlinear convective flow of Walters-B nanofluid over a nonlinear stretching sheet with variable thickness
Hayat T, Qayyum S, Alsaedi A, Ahmad B
515 - 522 Two-phase flow pressure drop in superhydrophobic channels
Stevens KA, Crockett J, Maynes DR, Iverson BD
523 - 538 Investigation of the coupled conductive and radiative heat transfer of molten slag in a cylindrical enclosure based on the zonal method
Yang CL, Wen GH, Sun QH, Tang P
539 - 544 Minimal dissipation conditions of heat exchange systems
Sieniutycz S, Tsirlin AM, Akhremenkov AA
545 - 554 Numerical analysis on the flow instability of parallel channels in water wall of an ultra-supercritical CFB boiler
Xie BB, Yang D, Wang WY, Nie X, Liu WY
555 - 561 Models development of liquid drops entrainment at a T-junction with a large vertical up branch
Sun DC, Zhang Y, Qiu SZ, Zan YF, Liu WX, Su GH
562 - 575 Heat transfer characteristics of double, triple and hexagonally-arranged droplet train impingement arrays
Zhang TL, Alvarado JL, Muthusamy JP, Kanjirakat A, Sadr R
576 - 586 Buoyancy effects on turbulent heat transfer of supercritical CO2 in a vertical mini-tube based on continuous wall temperature measurements
Xu RN, Luo F, Jiang PX
587 - 605 A coupling approach to modeling heat transfer during a full transient flight cycle
Errera MP, Lazareff M, Garaud JD, Soubrie T, Douta C, Federici T
606 - 612 Experiments on natural convection in water-cooled ribbed channels with different aspect ratios
Tanda G
613 - 628 High accuracy numerical investigation of double-diffusive convection in a rectangular cavity under a uniform horizontal magnetic field and heat source
Yu PX, Xiao ZC, Wu S, Tian ZF, Cheng XZ
629 - 642 Structure analysis of adiabatic film cooling effectiveness in the near field of a single inclined jet: Measurement using fast-response pressure-sensitive paint
Khojasteh AR, Wang SF, Peng D, Yavuzkurt S, Liu YZ
643 - 656 Mechanisms of pressure oscillation in steam jet condensation in water flow in a vertical pipe
Xu Q, Guo LJ, Chang L
657 - 670 Flow boiling of R245fa in the brazed plate heat exchanger: Thermal and hydraulic performance assessment
Imran M, Usman M, Yang Y, Park BS
671 - 679 Predicting VOC emissions from materials in vehicle cabins: Determination of the key parameters and the influence of environmental factors
Yang T, Zhang PP, Xu BP, Xiong JY
680 - 691 Thermal transport due to liquid jet impingement on superhydrophobic surfaces with isotropic slip
Searle M, Maynes D, Crockett J
692 - 709 Experimental demonstration, modeling and analysis of a novel latent-heat thermal energy storage unit with a helical fin
Rozenfeld A, Kozak Y, Rozenfeld T, Ziskind G
710 - 722 Lattice Boltzmann simulations for transition from dropwise to filmwise condensation on hydrophobic surfaces with hydrophilic spots
Li XP, Cheng P
723 - 729 Transport properties of SiO2/H2O solid-gas system for industrial flue gas: A molecular dynamics study
Yu YS, Tao YB, He YL
730 - 738 Effects of nozzle configuration on internal flow and primary jet breakup of flash boiling fuel sprays
Wu SQ, Xu M, Hung DLS, Pan HJ
739 - 745 Magnetic field effect on the nanofluids convective heat transfer and pressure drop in the spirally coiled tubes
Naphon P, Wiriyasart S, Arisariyawong T, Nualboonrueng T
746 - 752 Numerical investigation of the air-gap flow heating phenomena in large-capacity induction motors
Kim C, Lee KS
753 - 759 Magnetic field effect on the enhancement of nanofluids heat transfer of a confined jet impingement in mini-channel heat sink
Nakharintr L, Naphon P
760 - 767 Frosting model based on phase change driving force
Wu XM, Chu FQ, Ma Q
768 - 777 Steady state and transient analytical modeling of non-uniform convective cooling of a microprocessor chip due to jet impingement
Luhar S, Sarkar D, Jain A
778 - 782 Water evaporation in parallel plates
Soma S, Kunugi T
783 - 788 Study on average Nusselt and Sherwood numbers in vertical plate channels with falling water film evaporation
Wan YD, Ren CQ, Yang Y, Xing L
789 - 795 Experimental investigation of the performance of cool storage shelf for vertical open refrigerated display cabinet
Wu XH, Li WP, Wang YL, Chang ZJ, Wang CX, Ding C
796 - 804 Local heat transfer in subcooled flow boiling in a vertical mini-gap channel
Li W, Li JY, Feng ZZ, Zhou K, Wu Z
805 - 816 Influences of target surface small-scale rectangle roughness on impingement jet array heat transfer
Buzzard WC, Ren Z, Ligrani PM, Nakamata C, Ueguchi S
817 - 826 Numerical analysis of surface roughness effects on the Poiseuille flow caused by a small pressure drop
Rovenskaya OI
827 - 844 Energy coupling across low-dimensional contact interfaces at the atomic scale
Yue YN, Zhang JC, Xie YS, Chen W, Wang XW
845 - 854 Modeling and experiments for transient diffusion coefficients in the desorption of methane through coal powders
Zhao W, Cheng YP, Jiang HN, Wang HF, Li W
855 - 862 Gas formation in sand and clay during electrical resistance heating
Martin EJ, Mumford KG, Kueper BH, Siemens GA
863 - 872 Investigation on heat transfer and flow characteristics of heat exchangers with different trapezoidal ducts
Zhang XL, Wang YC, Jia RZ, Wan R
873 - 879 Dynamic behavior of bubble forming at capillary orifice in methane oxidizing bacteria suspension
Pei HS, Guo CL, Zhang GF, Tang QY, Guo FQ
880 - 889 Transient heat transfer due to exponentially increasing heat inputs for turbulent flow of FC-72 in small diameter tubes
Li YT, Fukuda K, Liu QS
890 - 897 The wall-free non-stationary fire whirls generation by axisymmetric burning of solid fuel pellets
Dermer PB, Varaksin AY, Leontiev AI
898 - 907 Investigation on the coupled heat and mass transfer process between extremely high humidity air and liquid desiccant in the counter-flow adiabatic packed tower
Wang ZY, Zhang XY, Li Z
908 - 920 A novel sand-dune-inspired design for improved film cooling performance
Zhou WW, Hu H
921 - 939 A mechanistic model for embryo size prediction at boiling incipience: 'Work of formation' based approach
Murallidharan JS, Prasad BVSSS, Patnaik BSV
940 - 949 A novel fouling measurement system: Part I. design evaluation and description
Shen C, Wang L, Ford SE, Zhang CC, Wang XL
950 - 961 A novel fouling measurement system: Part II. Commissioning
Shen C, Wang L, Ford SE, Zhang CC, Wang XL