335 - 342 |
금속알루미늄의 전기화학적 성질과 응용 Electrochemical Properties of Metal Aluminum and Its Application 탁용석, 강진욱, 최진섭 Tak Y, Kang J, Choi J |
343 - 348 |
Lead Frame 제조공정에서 발생되는 도금세정폐수 중 유가금속회수 Recovery of Precious Metals in Plating Rinsed Wastewater Generated from Lead Frame Manufacturing Process 김재용, 엄명헌, 안대현, 심명진 Kim JY, Um MH, An DH, Shim MJ |
349 - 356 |
실리카 지지 루테늄-니켈 합금에 있어서 일산화탄소의 흡착에 관한 IR 연구 IR Study on the Adsorption of Carbon Monoxide on Silica Supported Ruthenium-Nickel Alloy 박상윤, 윤동욱 Park SY, Yoon DW |
357 - 360 |
단열재용 페놀폼의 물성과 열적특성 Properties and Thermal Characteristics of Phenol Foam for Heat Insulating Materials 김동권, 이수복 Kim DK, Lee SB |
361 - 368 |
LPG 고압탱크 레벨 게이지(Level Gauge)용 발포부표 제조 기술 Preparation Technique of Foam-Floater to Level Gauge of LPG Tank with High Pressure 김병식, 홍주희, 정용재, 허광범 Kim BS, Hong JH, Chung Y, Heo KB |
369 - 374 |
Dihydrocinchonidine으로 개질된 Rh-Pt/Al2O3 이원금속 촉매를 이용한 Ethyl Pyruvate의 비대칭 수소화 Asymmetric Hydrogenation of Ethyl Pyruvate over Bimetallic Rh-Pt/Al2O3 Catalysts Modified with Dihydrocinchonidine 조홍백, 강준석, 박융호 Cho HB, Kang JS, Park YH |
375 - 380 |
β-시토스테롤의 지용성 치환체의 합성 및 특성에 관한 연구 Study on the Synthsis and Characteristics of Lipophilic Derivatives of β-Sitosterol 정대원, 조영태 Chung DW, Cho YT |
381 - 385 |
위상지연 원자간력 현미경법에 의한 혼성 에멀젼 표면의 분석 Analysis of Hybrid Emulsion Surfaces by the Phase Lag Mapping Atomic Force Microscopy 한상훈, 김종민, 박동원 Han SH, Kim JM, Park DW |
386 - 390 |
콜로이드 실리카의 제조 및 계면특성 Preparation and Interface Properties of Colloidal Silica 이한철, 김종협, 장윤호 Lee HC, Kim JH, Chang YH |
391 - 396 |
파라핀 왁스를 이용한 방사성 폐기물의 고화 특성 Solidify Properties of Radioactive Waste using Paraffin Wax 이한철, 장윤호 Lee HC, Chang YH |
397 - 402 |
백라이트 유니트 구성요소가 TFT-LCD TV용 광확산필름의 전기, 광학적 특성에 미치는 영향 Effect of BLU Ingredient on Electrical and Optical Properties of Light Diffusing Film used for TFT-LCD TV 안철흥, 김건중 Ahn CH, Kim GJ |
403 - 408 |
소수성의 실리카 나노입자가 충진된 치아수복용 고분자 복합체 제조 Synthesis of Polymeric Dental Restorative Composite Filled with Hydrophobic Silica Nanoparticle 한상혁, 서기택, 마승재, 임상명, 김오영 Han S, Seo K, Ma SJ, Lim SM, Kim O |
409 - 413 |
저온 플라즈마 및 암모니아 선택적 환원공정을 활용한 저온 탈질공정의 특성(I) Characteristics of Low Temperature De-NOx Process with Non-thermal Plasma and NH3 Selective Catalytic Reduction (I) 이재옥, 송영훈 Lee JO, Song YH |
414 - 419 |
저온 플라즈마 및 암모니아 선택적 환원공정을 활용한 저온 탈질공정의 특성(Ⅱ) Characteristics of Low Temperature De-NOx Process with Non-thermal Plasma and NH3 Selective Catalytic Reduction (II) 이재옥, 송영훈 Lee JO, Song YH |
420 - 425 |
Propylene Oxide를 이용한 졸-겔법에 의한 MO.Fe12O18 (M/Ba, Sr) 나노 분말의 합성과 물리적 특성 Synthesis and Physical Properties of MO;Fe12O18 (M/Ba and Sr) Nanoparticles Prepared by Sol-Gel Method Using Propylene Oxide 이수진, 최석범, 곽형섭, 백승욱 Lee SJ, Choe SB, Gwak HS, Paik S |
426 - 431 |
반응성 아조염료로 착색한 PMMA의 성질 Properties of PMMA Dyed with Reactive Azo Dye 금내리, 허지원 Geum N, Heo JW |