| 1 |
Industrial reheating furnaces: A review of energy efficiency assessments, waste heat recovery potentials, heating process characteristics and perspectives for steel industry
Zhao J, Ma L, Zayed ME, Elsheikh AH, Li WJ, Yan Q, Wang JC
Process Safety and Environmental Protection, 147, 1209, 2021 |
| 2 |
Mode I traction-separation measured using rigid double cantilever beam applied to structural adhesive
Watson B, Liao CH, Worswick MJ, Cronin DS
Journal of Adhesion, 96(8), 717, 2020 |
| 3 |
The effects of curing temperature on fracture energy and cohesive parameters for the adhesive Araldite 2015
Ozer H, Erbayrak E
Journal of Adhesion Science and Technology, 32(12), 1287, 2018 |
| 4 |
Modeling and experimental studies of mass transfer in the cavity zone of a rotating packed bed
Sang L, Luo Y, Chu GW, Liu YZ, Liu XZ, Chen JF
Chemical Engineering Science, 170, 355, 2017 |
| 5 |
Coupled simulation of recirculation zonal firebox model and detailed kinetic reactor model in an industrial ethylene cracking furnace
Fang Z, Qiu T, Zhou WG
Chinese Journal of Chemical Engineering, 25(8), 1091, 2017 |
| 6 |
Scalar dissipation rate based multi-zone model for early-injected and conventional diesel engine combustion
Jochim B, Korkmaz M, Pitsch H
Combustion and Flame, 175, 138, 2017 |
| 7 |
A Survey of Computational Models for Adhesion
Sauer RA
Journal of Adhesion, 92(2), 81, 2016 |
| 8 |
Determination of Traction Separation Law for Interfacial Failure in Adhesive Joints at Different Loading Rates
Desai CK, Basu S, Parameswaran V
Journal of Adhesion, 92(10), 819, 2016 |
| 9 |
Adaptive thermal zone modeling including the storage mass of the building zone
Kossak B, Stadler M
Energy and Buildings, 109, 407, 2015 |
| 10 |
A 3D ductile constitutive mixed-mode model of cohesive elements for the finite element analysis of adhesive joints
Anyfantis KN, Tsouvalis NG
Journal of Adhesion Science and Technology, 27(10), 1146, 2013 |
