1 |
Catalytic pyrolysis of chemical extraction residue from microalgae biomass Gong ZQ, Fang PW, Wang ZB, Li Q, Li XY, Meng FZ, Zhang HT, Liu L Renewable Energy, 148, 712, 2020 |
2 |
Rational design of CrOx/LaSrMnCoO6 composite catalysts with superior chlorine tolerance and stability for 1,2-dichloroethane deep destruction Tian MJ, Jian YF, Ma MD, He C, Chen CW, Liu C, Shi JW Applied Catalysis A: General, 570, 62, 2019 |
3 |
Mathematical model of Fischer-Tropsch synthesis using variable alpha-parameter to predict product distribution Filip L, Zamostny P, Rauch R Fuel, 243, 603, 2019 |
4 |
Products distribution and kinetic analysis on gaseous products during fast pyrolysis of two kinds of biomass pellet Wu ZQ, Zhang B, Hu Q, Hao WB, Ma C, Li YW, Yang BL Fuel, 249, 8, 2019 |
5 |
Chemical looping gasification of lignocellulosic biomass with iron-based oxygen carrier: Products distribution and kinetic analysis on gaseous products from cellulose Wu ZQ, Zhang B, Wu S, Li GM, Zhao SD, Li YW, Yang BL Fuel Processing Technology, 193, 361, 2019 |
6 |
TG-FTIR and Py-GC/MS study on pyrolysis mechanism and products distribution of waste bicycle tire Xu FF, Wang B, Yang D, Ming X, Jiang Y, Hao JH, Qiao YY, Tian YY Energy Conversion and Management, 175, 288, 2018 |
7 |
Thermal cracking behaviors and products distribution of oil sand bitumen by TG-FTIR and Py-GC/TOF-MS Hao JH, Feng W, Qiao YY, Tian YY, Zhang JH, Che YJ Energy Conversion and Management, 151, 227, 2017 |
8 |
Product Distribution from Co-gasification of Coal and Biomass in a Fluidized-bed Reactor Song YC, Ji MS, Feng J, Li WY Energy Sources Part A-recovery Utilization and Environmental Effects, 37(23), 2550, 2015 |
9 |
Products analysis of Shendong long-flame coal hydropyrolysis with iron-based catalysts Feng J, Xue XY, Li XH, Li WY, Guo XF, Liu K Fuel Processing Technology, 130, 96, 2015 |
10 |
Oligomers distribution at the gel point of tannin-formaldehyde thermosetting adhesives for wood panels Pizzi A, Pasch H, Celzard A, Szczurek A Journal of Adhesion Science and Technology, 27(18-19), 2094, 2013 |