1 |
Stabilization of heavy metals in municipal solid waste incineration fly ash via CO2 uptake procedure by using various weak acids Kang DW, Yoo YS, Park JW Journal of Industrial and Engineering Chemistry, 94, 472, 2021 |
2 |
Intermediate-calcium based cementitious materials prepared by MSWI fly ash and other solid wastes: hydration characteristics and heavy metals solidification behavior Liu XM, Zhao XB, Yin HF, Chen JL, Zhang N Journal of Hazardous Materials, 349, 262, 2018 |
3 |
Process development for chemical stabilization of fly ash from municipal solid waste incineration Vavva C, Voutsas E, Magoulas K Chemical Engineering Research & Design, 125, 57, 2017 |
4 |
Co-combustion Kinetics Parameters of MSWI Fly Ash with Sawdust and Shale under Different Heating Rates and Atmospheres Tan WF, Wang LA, Huang C, Li JX, Yang W Energy Sources Part A-recovery Utilization and Environmental Effects, 37(22), 2415, 2015 |
5 |
A comparative study on the heavy metal solidification/stabilization performance of four chemical solidifying agents in municipal solid waste incineration fly ash Wang FH, Zhang F, Chen YJ, Gao J, Zhao B Journal of Hazardous Materials, 300, 451, 2015 |
6 |
Use of metakaolin to stabilize sewage sludge ash and municipal solid waste incineration fly ash in cement-based materials Cyr M, Idir R, Escadeillas G Journal of Hazardous Materials, 243, 193, 2012 |
7 |
Utilization of municipal solid waste incineration (MSWI) fly ash in blended cement Part 2. Mechanical strength of mortars and environmental impact Aubert JE, Husson B, Sarramone N Journal of Hazardous Materials, 146(1-2), 12, 2007 |
8 |
Electrodialytic extraction of Cu, Pb and Cl from municipal solid waste incineration fly ash suspended in water Ottosen LM, Lima AT, Pedersen AJ, Ribeiro AB Journal of Chemical Technology and Biotechnology, 81(4), 553, 2006 |
9 |
Utilization of municipal solid waste incineration (MSWI) fly ash in blended cement. Part 1: Processing and characterization of MSWI fly ash Aubert JE, Husson B, Sarramone N Journal of Hazardous Materials, 136(3), 624, 2006 |