1 |
Physicochemical characteristics and mechanism of fluoride removal using powdered zeolite-zirconium in modes of pulsed& continuous sonication and stirring Savari A, Hashemi S, Arfaeinia H, Dobaradaran S, Foroutan R, Mahvi AH, Fouladvand M, Sorial GA, Farjadfard S, Ramavandi B Advanced Powder Technology, 31(8), 3521, 2020 |
2 |
Highly efficient [C(8)mim][Cl] ionic liquid accompanied with magnetite nanoparticles and different salts for interfacial tension reduction Hashemi S, Saien J Chinese Journal of Chemical Engineering, 28(1), 46, 2020 |
3 |
The effects of surfactants (sodium dodecyl sulfate, triton X-100 and cetyl trimethyl ammonium bromide) on the dewaterability of microalgae biomass using pressure filtration Taghavijeloudar M, Park J, Hashemi S, Han M Bioresource Technology, 273, 565, 2019 |
4 |
Analytical and molecular dynamics studies on the impact loading of single-layered graphene sheet by fullerene Hosseini-Hashemi S, Sepahi-Boroujeni A, Sepahi-Boroujeni S Applied Surface Science, 437, 366, 2018 |
5 |
Gas-liquid mass transfer in a slurry bubble column operated at gas hydrate forming conditions Hashemi S, Macchi A, Servio P Chemical Engineering Science, 64(16), 3709, 2009 |
6 |
Prediction of Thermophoretic Deposition Efficiency of Particles in a Laminar Gas Flow along a Concentric Annulus: A Comparison of Developing and Fully Developed Flows Hashemi S, Goharrizi AS Chinese Journal of Chemical Engineering, 17(5), 727, 2009 |
7 |
Dynamic Simulation of Gas Hydrate Formation in a Three-Phase Slurry Reactor Hashemi S, Macchi A, Servio P Industrial & Engineering Chemistry Research, 48(15), 6983, 2009 |
8 |
Effect of fibre concentration, strain rate and weldline on mechanical properties of injection-moulded short glass fibre reinforced thermoplastic polyurethane Wilberforce S, Hashemi S Journal of Materials Science, 44(5), 1333, 2009 |
9 |
Effect of fibre concentration and strain rate on mechanical properties of single-gated and double-gated injection-moulded short glass fibre-reinforced polypropylene copolymer composites Onishi P, Hashemi S Journal of Materials Science, 44(13), 3445, 2009 |
10 |
Effect of fibre concentration, temperature and mould thickness on weldline integrity of short glass-fibre-reinforced polypropylene copolymer composites Hashemi S, Onishi P Journal of Materials Science, 44(20), 5588, 2009 |