1 |
Effect of lifter shape and operating parameters on the flow of materials in a pilot rotary kiln: Part III. Up-scaling considerations and segregation analysis Njeng ASB, Vitu S, Clausse M, Dirion JL, Debacq M Powder Technology, 297, 415, 2016 |
2 |
Effect of lifter shape and operating parameters on the flow of materials in a pilot rotary kiln: Part I. Experimental RTD and axial dispersion study Njeng ASB, Vitu S, Clausse M, Dirion JL, Debacq M Powder Technology, 269, 554, 2015 |
3 |
Effect of lifter shape and operating parameters on the flow of materials in a pilot rotary kiln: Part II. Experimental hold-up and mean residence time modeling Njeng ASB, Vitu S, Clausse M, Dirion JL, Debacq M Powder Technology, 269, 566, 2015 |
4 |
A hydrodynamic model for flighted rotary kilns used for the conversion of cohesive uranium powders Debacq M, Thammavong P, Vitu S, Ablitzer D, Houzelot JL, Patisson F Chemical Engineering Science, 104, 586, 2013 |
5 |
Transverse motion of cohesive powders in flighted rotary kilns: experimental study of unloading at ambient and high temperatures Debacq M, Vitu S, Ablitzer D, Houzelot JL, Patisson F Powder Technology, 245, 56, 2013 |
6 |
Experimental Apparatus for Studying Heat Transfer in Externally Heated Rotary Kilns Thammavong P, Debacq M, Vitu S, Dupoizat M Chemical Engineering & Technology, 34(5), 707, 2011 |
7 |
Removal of phenolic compounds present in olive mill wastewaters by ozonation Chedeville O, Debacq M, Porte C Desalination, 249(2), 865, 2009 |