화학공학소재연구정보센터
검색결과 : 46건
No. Article
1 Grain surface analysis of a hydrophobized sand: Thickness estimation of the soft coating layer
Yang HW, Lourenco SDN, Xing X
Powder Technology, 377, 827, 2021
2 Modulation of substrate van der Waals forces using varying thicknesses of polymer overlayers
Wang HF, Evans D, Voelcker NH, Griesser HJ, Meagher L
Journal of Colloid and Interface Science, 580, 690, 2020
3 축전식 탈염공정에서 탄소전극에 코팅된 이온교환 고분자의 두께와 탈착전위가 탈착 성능에 미치는 영향
임지원
Polymer(Korea), 44(5), 618, 2020
4 Evaluation of the effect of PyC coating thickness on the mechanical properties of T700 carbon fiber tows
Zhang T, Qi LH, Li SL, Chao XJ, Tian WL, Zhou JM
Applied Surface Science, 463, 310, 2019
5 Investigating the effect of varying coating thickness on the surface roughness and adhesion forces of MEMS surfaces utilizing a theoretical and experimental approach
Kolahdoozan M, Kiani A, Heidari P, Oveissi S
Applied Surface Science, 481, 531, 2019
6 필름 인서트 성형품의 인몰드 코팅에서 공정조건이 캐비티 압력과 표면특성에 미치는 영향
손진우, 이호상
Polymer(Korea), 43(2), 211, 2019
7 Preparation and characterization of bright high quality YAG: Eu3+ thin films grown by sol-gel dip-coating technique
Boukerika A, Guerbous L, Chelef H, Benharrat L
Thin Solid Films, 683, 74, 2019
8 Pore size effect on one-way water-transport cotton fabrics
Wang HJ, Wang WY, Wang H, Jin X, Li JL, Wang HX, Zhou H, Niu HT, Lin T
Applied Surface Science, 455, 924, 2018
9 Characterization of reflow soldering at a peak temperature of 215 degrees C using a Bi-coated Sn-3.0Ag-0.5Cu solder ball
Hwang JH, Lee JH
Applied Surface Science, 454, 227, 2018
10 A quantitative comparison of in-line coating thickness distributions obtained from a pharmaceutical tablet mixing process using discrete element method and terahertz pulsed imaging
Pei CL, Lin HY, Markl D, Shen YC, Zeitler JA, Elliott JA
Chemical Engineering Science, 192, 34, 2018