1 |
Thermal performance of finned aluminum heat sink filled with ERG aluminum foam: Experimental and numerical approach Bayomy AM, Saghir Z International Journal of Energy Research, 44(6), 4411, 2020 |
2 |
Effect of oxidation on the Al-foam reinforced matrix, for molten carbonate fuel cells Kim HW, Bae JK, Kang MG, Jang SC, Ham HC, Yoon SP, Choi HJ International Journal of Hydrogen Energy, 44(39), 22210, 2019 |
3 |
Forced convection heat transfer from porous heat sinks placed in partially open cavity: Some case studies Ozbalci O, Dogan A Experimental Heat Transfer, 31(3), 183, 2018 |
4 |
Structured noble metal-based catalysts for the WGS process intensification Palma V, Pisano D, Martino M International Journal of Hydrogen Energy, 43(26), 11745, 2018 |
5 |
Effects of epoxy resin liquidity on the mechanical properties of aluminum foam sandwich Yan C, Song XD, Jing CH, Feng S Journal of Adhesion Science and Technology, 32(6), 673, 2018 |
6 |
Nanostructural approach to the thickening behavior and oxidation of calcium-stabilized aluminum foams Nayebi B, Mehrabian M, Asl MS, Shokouhimehr M Materials Chemistry and Physics, 220, 351, 2018 |
7 |
3D Photocatalytic media for decontamination of water from pesticides Elatmani K, Ben Oujji N, Plantara G, Goetz V, Ichou IA Materials Research Bulletin, 101, 6, 2018 |
8 |
Mechanical strength improvement of aluminum foam-reinforced matrix for molten carbonate fuel cells Lee M, Lee CW, Ham HC, Han J, Yoon SP, Lee KB International Journal of Hydrogen Energy, 42(25), 16235, 2017 |
9 |
The influence of the textural properties of aluminum foams as catalyst carriers for water gas shift process Palma V, Pisano D, Martino M International Journal of Hydrogen Energy, 42(37), 23517, 2017 |
10 |
Structured catalysts with high thermoconductive properties for the intensification of Water Gas Shift process Palma V, Pisano D, Martino M, Ciambelli P Chemical Engineering Journal, 304, 544, 2016 |