Radiation processing
Heat shrinkage of electron beam modified EVA

https://doi.org/10.1016/S0969-806X(97)00034-0Get rights and content

Abstract

Heat shrinkage of electron beam modified ethylene vinyl acetate copolymer (EVA) has been investigated over a range of times, temperatures, stretching, irradiation doses and trimethylolpropane trimethacrylate (TMPTMA) levels. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) and stretched (100% elongation) sample shrinks to a maximum level when kept at 453K temperature for 60 s. The heat shrinkage of samples irradiated with radiation doses of 20, 50, 100 and 150 kGy increases sharply with increasing stretching in the initial stage. Amnesia rating decreases with increasing radiation dose and TMPTMA level as well as gel content. The high radiation dose and TMPTMA level lower the heat shrinkage due to the chain scission. The effect of temperature at which extension is carried out on heat shrinkage is marginal. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) EVA tubes of different dimensions expanded in a laboratory grade tube expander show similar behaviour at 453K and 60 s. The X-ray and DSC studies reveal that the crystallinity increases on stretching due to orientation of chains and it decreases to a considerable extent on heat shrinking. The theoretical and experimental values of heat shrinkage for tubes and rectangular strips are in good accord, when the radiation dose is 50 kGy and TMPTMA level 1%.

References (26)

  • T.K. Chaki et al.

    Dynamic mechanical relaxations in irradiation crosslinked polyethylene grafted with methyl methacrylate

    J. Polym. Eng.

    (1994)
  • T.K. Chaki et al.

    Electron beam initiated grafting of triallyl cyanurate onto polyethylene: structure and properties

    J. Appl. Polym. Sci.

    (1994)
  • J. Dobo et al.

    Some properties of radiation crosslinked polyethylene and ethylene vinyl acetate copolymer

  • Cited by (29)

    • X-ray induced cationic curing of epoxy-bonded composites

      2017, European Polymer Journal
      Citation Excerpt :

      With respect to polymer technology, radiation is used to initiate polymerization and selectively alter the chemical structure of polymers, resulting in chain scission and crosslinking [5]. Typical applications are the crosslinking of polyethylene [6] for heat shrink films [7] and cable insulations, and the crosslinking of elastomers [8]. In contrast to conventional thermal processing methods, the directionality of the incident beam also allows for a spatially resolved irradiation of the product.

    • High-energy radiation and polymers: A review of commercial processes and emerging applications

      2001, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
    • Modern industry-Development of new materials

      2021, Encyclopedia of Nuclear Energy
    View all citing articles on Scopus
    View full text