ZrO2/PMMA Nanocomposites: Preparation and Its Dispersion in Polymer Matrix

https://doi.org/10.1016/S1004-9541(13)60448-6Get rights and content

Abstract

ZrO2/PMMA nanocomposite particles are synthesized through an in-situ free radical emulsion polymerization based on the silane coupling agent (Z-6030) modified ZrO2 nanoparticles, and the morphology, size and its distribution of nanocomposite particles are investigated. Scanning electron microscopy (SEM) images demonstrate that the methyl methacrylate (MMA) feeding rate has a significant effect on the particle size and morphology. When the MMA feeding rate decreases from 0.42 mlmin−1 to 0.08 mlmin−1, large particles (about 200-550 nm) will not form, and the size distribution become narrow (36-54 nm). The average nanocomposite particles size increases from 34 nm to 55 nm, as the MMA/ZrO2 nanoparticles mass ratio increased from 4 : 1 to 16 : 1. Regular spherical ZrO2/PMMA nanocomposite particles are synthesized when the emulsifier OP-10 concentration is 2 mgml−1. The nanocomposite particles could be mixed with VAc-VeoVa10 polymer matrix just by magnetic stirring to prepare the ZrO2/PMMA/VAc-VeoVa10 hybrid coatings. SEM and atomic force microscopy (AFM) photos reveal that the distribution of the ZrO2/PMMA nanocomposite particles in the VAc-VeoVa10 polymer matrix is homogenous and stable. Here, the grafted-PMMA polymer on ZrO2 nanoparticles plays as a bridge which effectively connects the ZrO2 nanoparticles and the VAc-VeoVa10 polymer matrix with improved comparability. In consequence, the hybrid coating with good dispersion stability is obtained.

References (27)

  • G.J. Fleer et al.

    “Polymer adsorption and its effect on the stability of hydrophobic colloids. The flocculation process as studied with the silver iodide-polyvinyl alcohol system”

    J. Coll. Interf. Sci.

    (1974)
  • P. Podsiadlo et al.

    “Ultrastrong and stiff layered polymer nanocomposites”

    Science

    (2007)
  • S.H. Jeong et al.

    “Combined role of well-dispersed aqueous Ag ink and the molecular adhesive layer in inkjet printing the narrow and highly conductive Ag features on a glass substrate”

    J. Phys. Chem. C

    (2010)
  • Cited by (0)

    Supported by Production, Teaching & Research Combination Project for Universities in Guangdong Province (cgzhzd0904), Department of Education of Guangdong Province, China.

    View full text